Kraus KHU10032165041CH, KBU22E165042CH, KHU32165041CH, KBU14E165042CH, KHF20030165041CH User Manual
...
INSTALLATION GUIDE
Nola™ Single Lever Commercial
Style Kitchen Faucet
KPF-1650
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the
old faucet to release any built up pressure. Remove existing faucet. Clean
sink or countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to
installing new plumbing. Shut o angle stops
• Pre-drilled hole size requirement: 1-3/8”
• Max countertop thickness without deck plate: 1-3/8”
• 1, 2, or 3 hole installation
Tools you will need
Adjustable Wrench
Bucket
Phillips Screwdriver
Safety Goggles
2
Diagram and Parts List
A
E
F
C1
C2
C3
A. Spray Head
B. Faucet Body
C. Mounting Hardware
C1. Rubber & Metal Washer
C2. Mounting Nut
C3. Mounting Screw
D. Metal Base Ring
B
D
G
H
I
E. Hot & Cold Waterlines
F. Aerator Key
G. Faucet Extender (used for top
mount sinks only)
H. 2.5 mm Hex Wrench
I. Deck Plate Assembly
3
Faucet Dimensions
360
26 3/16”
º
26.2”
(665mm)
90
7 3/16”
7.2”
(183mm)
º
8 11/16”
8.66”
(220mm)
Ø54
Ø35
35MAX
35MAX
Ø35
4
Loading...