Kraus KHU10032164042CH, KHU10030164042CH, KBU14E164042SS Installation manual
INSTALLATION MANUAL
Nola™ Single Lever Flex Commercial
Style Kitchen Faucet
KPF-1640
www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV. August 16, 2016
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
1
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the
old faucet to release any built up pressure. Remove existing faucet. Clean
sink or countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to
installing new plumbing. Shut o angle stops
• Pre-drilled hole size requirement: 1-3/8”
• Max countertop thickness without deck plate: 1-3/8”
• 1, 2, or 3 hole installation
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Tools you will need
Adjustable Wrench
Bucket
Phillips Screwdriver
Safety Goggles
2
Diagram and Parts List
A
D
B
E
F
A. Spray Head
B. Faucet Body
C. Mounting Hardware
C1. Rubber & Metal Washer
C2. Mounting Nut
C3. Mounting Screw
3
C1
C2
G
C3
H
D. Hot & Cold Waterlines
E. Aerator Key
F. Faucet Extender (used for top
mount sinks only)
G. 2.5 mm Hex Wrench
H. Deck Plate Assembly
Faucet Dimensions
4.92”
(125mm)
19.56”
(497mm)
360
º
º
90
8.66”
(220mm)
6.4”
(163 mm)
2”
(51mm)
35MAX
35MAX
4
Loading...