Kraus KHT30125, KHT301SB, KHT30233, KHT30033 User Manual
INSTALLATION GUIDE
StandardPRO Thick Deck Stainless
Steel Topmount Kitchen Sinks
KHT300-33 / KHT301-18 /
KHT301-25 / KHT302-33
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. June 22, 2018
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Prior to Installation:
• Make sure that you have all necessary parts by checking the parts list. If any part is
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Inspect the sink prior to installation to make sure that it has not been damaged or
during shipping
• Use the cut-out template provided by Kraus
• Observe all plumbing and building codes according to your state requirements
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing
a Kraus sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended
to install all Kraus products by hiring a licensed professional.
2
Tools you will need:
Phillips screwdriver
Adjustable wrench
Phillips screwdriver
Hex wrench
Silicone Sealant
I
D
J
F
B
G
H
E
Safety Goggles
Scissors Screwdriver
NOTE: Specialized tools may be necessary to install Kraus stainless steel topmount
sinks with countertop materials other than wood, marble, or granite
Drill
Putty KnifePhillips Screwdriver
Silicone Adhesive Jig Saw
Tape Measure
Parts List
• Cut-Out Template
• Mounting Hardware
• Bottom Grid
• Drain
• Drain Cap
Pencil
3
Dimensions
31”
787mm
33”
838mm
18”
457mm
22”
559mm
16”
406mm
18”
457mm
14”
18”
356mm
457mm
KHT300-33
33” x 22” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-300-33
Drain Model #: ST-1
Drain Cap: STC-2
23”
584mm
25”
635mm
18”
10”
22”
457mm
254mm
10”
559mm
254mm
10”
254mm
KHT301-18
18” x 18” x 10”
Min Cabinet Size: 20”
Matching Grid: KBG-301-18
Drain Model #: ST-1
Drain Cap: STC-2
15-1/2” 15-1/2”
394mm 394mm
33”
838mm
18”
10”
457mm
254mm
22”
559mm
KHT301-25
25” x 22” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-301-25
Drain Model #: ST-1
Drain Cap: STC-2
KHT302-33
33” x 22” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-302-33
Drain Model #: ST-1 × 2
Drain Cap: STC-2 × 2
4
Loading...