Kraus KHF20333KPF1621KSD30CH, KHF20030KPF1621KSD30CH Installation manual
INSTALLATION GUIDE
Single Lever Pull-Out Kitchen Faucet
KPF-1621
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Prior to Installation
Make sure that cold and hot water lines are turned o
•
• Wrap all threaded connections with Teon tape. Always wrap in a clockwise
direction
• Cover your drain to avoid losing parts
• Do not disassemble the main faucet body, as it has been installed &
commissioned correctly & precisely before delivery from the factory
• To keep the faucet from jamming, ush the water pipe before installation
• Using condition: Working pressure at 0.05-1.0MPa (including cold & hot
water pressure) with applicable water temperature: 4C-90C
• After installation, make sure every joint is safely sealed and that there is no
leaking
• Make sure to correct the hot/cold inlet pipe correctly: if facing faucet, hot
water pipe connects on the left and cold water pipe connects on the right
2
KPF-1621 Diagram and Parts List
11
13
13
9
8
1
Included Parts:
1. Faucet Body
2. Base O-Ring
3. Rubber Washer
4. Metal Washer
5. Mounting Nut
6. Mounting Screws (2)
7. Weight
8. Spray Head
9. Spray Hose
10. Hot and Cold Waterlines (2)
11. Manual
10
2
3
4
5
6
7
Tools you will need:
7
11
3
Wrench Phillips Screwdriver
Dimension Drawings
mm
249
11 9/16”
Ø3/8”~Ø1 1/2”
20°
231
9 3/32”
Ø35~Ø38
mm
Hot
Water
Cold
Water
Safety Tips
•
If soldering the water connections when installing the faucet, remove the O-rings,
cartridges, and washers before applying any heat
• Protect your eyes with safety glasses when cutting or soldering
4
Loading...