Kramer Electronics VP-727T User Manual

Kramer Electronics, Ltd.
USER MANUAL
Model:
VP-727T
Contents
Contents
1
Introduction 1
1.1 About the VP-727T Presentation Switcher Control Panel 1
2
Getting Started 1
2.1 Quick Start 1
3
Overview 2
4
Your VP-727T Presentation Switcher Control Panel 3
5
Installing in a Desktop 7
6
Installing on a Rack 9
7
Connecting the VP-727T 10
7.1 Connecting via RS-485 11
7.2 Connecting a PC (via RS-232) 12
7.3 Setting the Machine # 12
8
Operating the VP-727 using the VP-727T 13
8.1 Using the VP-727T WIPE DIRECTION Buttons 13
8.2 Making the Transition 14
8.2.1 Making a Transition Manually 14
8.2.2 Making a Transition Automatically 14
9
Technical Specifications 14
Figures
Figure 1: VP-727T Presentation Switcher Control Panel 4 Figure 2: VP-727T Presentation Switcher Control Panel (Side Panel) 6 Figure 3: Cut Out Dimensions 7 Figure 4: Inserting the VP-727T into the Prepared Cut Out Opening 7 Figure 5: Inserting the Mounting Brackets through the Bracket Slits 8 Figure 6: Securing the VP-727T into the Prepared Cut Out Opening 8 Figure 7: Connecting the VP-727T 10 Figure 8: Connecting the VP-727T RS-485 Ports 11 Figure 9: Connecting the PC 12
Tables
Table 1: VP-727T Presentation Switcher Control Panel Features 5 Table 2: VP-727T Presentation Switcher Control Panel (Side Panel) Features 6 Table 3: Defining the WIPE DIRECTIONS Buttons 13 Table 4: Technical Specifications of the VP-727T 14
i
Introduction
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 500-plus different models now appear in 8 Groups1, which are clearly defined by function. Congratulations on purchasing your Kramer VP-727T Presentation Switcher Control Panel, which is ideal for staging events, as well as:
 Presentation applications that require a preview option
 Projection systems in conference rooms, board rooms, auditoriums,
hotels, and churches
1.1 About the VP-727T Presentation Switcher Control Panel
The Kramer VP-727T Presentation Switcher Control Panel is used to control the VP-727 Universal Presentation Matrix Switcher / Scaler2. The Kramer VP-727T lets you remotely control switcher functions such as input selection, transition effects (that include cut, fade, and wipes) and transition speed.
Note that the VP-727 needs firmware package Master FW 1.03 (Ver. 1.03) (or higher) to work with the VP-727T.
The package includes: the VP-727T, gooseneck lamp, null-modem adapter, power supply, rack ears kit3, table-top brackets, and this user manual4.
2 Getting Started
We recommend that you:
 Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
 Review the contents of this user manual
2.1 Quick Start
This Quick start chart summarizes the basic steps when connecting a VP-727T:
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 A true multi-standard video to graphics scaler and seamless switcher with 8 universal inputs comprised of 5 BNC
connectors each of which can accommodate a composite video, s-Video (Y/C), component video (RGB/YUV), RGBS, or
RGBHV signal. It has dual scalers, one for the preview and the other for the program output. Dual scalers are required to do
"live" seamless transitions from one source to another
3 A pair of rack ears, two spacers and ten screws
4 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
1
Overview
3 Overview
The VP-727T is a unique presentation switcher control panel dedicated specifically to control the VP-727. It is ergonomically and aesthetically designed in a rugged, professional 19" 4U rack-mountable metal enclosure with the button layout in the style of the VP-727. In particular, the VP-727T:
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-727T Presentation Switcher Control Panel
 Enables special effect transitions between two sources via a robust T-bar (used for manual control of transition speeds). Alternatively, the effect can be implemented via a TAKE button, with a potentiometer to set the transition speed
 Features single button access to all inputs1—both for the Preview and for the Program output—and the buttons have removable transparent caps to allow labeling
 Features dedicated single button actions for special effect selection, immediate freezing and blanking, PIP display, and the choice of wipe direction
 Has the user menu—conveniently located on the VP-727T panel—for complete control of the VP-727 via its Preview OSD
 Consol can be simultaneously connected to up to four VP-727 machines. Control communication is via the RS-485 port, thus allowing the panel to be located more than 1km from each VP-727
 Has an RS-232 port for field upgrading of its firmware
 With its angled faceplate, may be used freestanding on a table, or
mounted in a desktop or in a 19” rack (when your switcher is rack-mounted near to the source devices, you can conveniently place the VP-727T on a table or desk away from the equipment rack)
 Has a gooseneck lamp (included) that can be plugged into the consol for use in low lighting environments
 Is powered by a 12V DC source
To achieve the best performance:
 Connect only good quality connection cables
 Avoid interference from neighboring electrical appliances, make sure not
to block the ventilation holes and position your VP-727T away from moisture, excessive sunlight and dust. Be sure to position it straight in the correct horizontal position on the table, desk or rack
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit2.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
4 Your VP-727T Presentation Switcher Control Panel
Figure 1 and Table 1 define the front panel of the VP-727T:
1 Has two sets of input buttons: one that routes the input to the "PROGRAM" output and the other that routes to the
"PREVIEW" output
2 For example: model number AD2512C, part number 2535-000251
3
Your VP-727T Presentation Switcher Control Panel
Figure 1: VP-727T Presentation Switcher Control Panel
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-727T Presentation Switcher Control Panel
Table 1: VP-727T Presentation Switcher Control Panel Features
# Feature Function
1 LAMP Button Toggles the gooseneck lamp ON/OFF 2 MENU Button Displays the OSD Menu screen (or moves to the previous level in the OSD menu) 3 ENTER Button Moves to the next level in the OSD menu 4 CONTROLLER ON
Button 5
6
OSD
7
8 9 OSD Button Activates/deactivates access to the OSD Menu1 10 FADE 2 Button Selects a dissolved transition from the PREVIEW to the PROGRAM output 11 CUT 2 Button Selects an instantaneous transition from the PREVIEW to the PROGRAM output
3,5
12
13
14
15
16
17
TRANSITION Buttons
18 WIPE DIRECTION
Buttons
19 SPEED Knob Adjusts the TAKE button transition speed
20 TAKE Button5 Pressing TAKE causes the transition to occur automatically
21 PREVIEW LED Lights when the T-bar Controller is directed upwards
22 PREVIEW LED Lights when the T-bar Controller is directed downwards
23 T-bar Control Lever6 Slide to manually implement the effect using the T-bar handle
24
25
26
PROGRAM
27
28
29
30
PREVIEW
31
32 MACHINE # Button Pressing selects which MACHINE # is controlled
33 7-segment LED Display Shows the MACHINE #
34 Lamp Connector Connects to the gooseneck lamp
Buttons
NAVIGATION
PIP Toggles the picture-in-picture function on and off
BLANK Toggles between a blank screen and the selected input
FREEZE Freezes the output video image (toggle)
Buttons
INPUTS Selects one of the sources: R/PR, G/Y/CV, B/PB/C, HS/C
PIP Toggles the picture-in-picture function on and off
BLANK Toggles between a blank screen and the selected input
FREEZE Freezes the output video image (toggle)
Buttons
INPUTS Selects one of the sources: R/PR, G/Y/CV, B/PB/C, HS/C
Toggles the VP-727T Presentation Switcher Control Panel ON/OFF
Toggles within each level 2 command / decreases the range by one step
Moves up one step (in the same level) in the OSD menu
Toggles within each level 2 command / increases the range by one step
Moves down one step (in the same level) in the OSD menu
Selects a WIPE transition effect
Selects a DIAGONAL transition effect
Selects a CIRCLE transition effect
Selects a SQUARE transition effect
Selects a CORNER transition effect
Selects a CHESSBOARD transition effect
Choose the direction of the effect4: inwards, outwards, “left to right”, “right to left”, “up” or “down” (see section 8.2)
S
,
VS (from 1 to 8)
S
,
VS (from 1 to 8)
1 The LCD is not affected by the OSD setting
2 Only for setting up the unit for the effect. The effect will only occur when the Take button is pressed, or the T-bar is moved
3 Select a specific effect for the transition from the PREVIEW output to the PROGRAM output
4 From where the effect starts
5 The effect is only seen in PROGRAM Mode. The PREVIEW screen will blank during the transition
6 An alternative to using the TAKE button
5
Your VP-727T Presentation Switcher Control Panel
Figure 2 and Table 2 define the side panel of the VP-727T:
Figure 2: VP-727T Presentation Switcher Control Panel (Side Panel)
Table 2: VP-727T Presentation Switcher Control Panel (Side Panel) Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 RS-232 DB 9 Connector Connects to the PC for upgrading the firmware 3 MACH. # 4 Connects to the RS-485 port1 on the VP-727 which is recognized as machine # 4
4 MACH. # 3
5 MACH. # 2
6
Block
3-PIN
Terminal
TO VP-727
MACH. # 1
Connects to the RS-485 port1 on the VP-727 which is recognized as machine # 3
Connects to the RS-485 port1 on the VP-727 which is recognized as machine # 2
Connects to the RS-485 port1 on the VP-727 which is recognized as machine # 1
1 Pin G is for the Ground connection, which is sometimes connected to the shield of the RS-485 cable. In most applications,
the ground is not connected; pins B (-) and A (+) are for RS-485. The RS-485 PINOUT: GBA may not be printed on some
VP-727T units
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing in a Desktop
5 Installing in a Desktop
This section describes how to install the VP-727T in a desktop1.
To install the VP-727T in a desktop:
1. Cut an opening in the desktop—making the cut out on a wooden surface using a sabre saw or a keyhole saw—at the location where you want to insert the VP-727T. Figure 3 illustrates the cut out template (not to scale) defining the surface that you have to cut out to install your VP-727T.
Figure 3: Cut Out Dimensions
2. Carefully insert the VP-727T unit into the prepared cut out opening, as illustrated in Figure 4.
Figure 4: Inserting the VP-727T into the Prepared Cut Out Opening
1 Alternatively, you can use it freestanding on a table, or mounted in a 19” rack (see section 6)
7
Installing in a Desktop
3. Insert the two mounting brackets through the bracket slits on both sides of the VP-727T unit (see Figure 5).
Figure 5: Inserting the Mounting Brackets through the Bracket Slits
4. Be sure that the upper outer rim is situated parallel to the edge of the desktop.
5. Screw the mounting butterfly screws until they reach the desktop surface (from the underneath).
6. Tighten the locking butterfly screws to lock the mounting butterfly screws. The VP-727T unit is now secured in place, as illustrated in Figure 6.
Figure 6: Securing the VP-727T into the Prepared Cut Out Opening
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing on a Rack
6 Installing on a Rack
This section describes what to do before installing on a rack and how to rack mount.
Before Installing on a Rack
Before installing on a rack, be sure that the environment is within the recommended range:
Operating temperature range +5 to +45 Deg. Centigrade
Operating humidity range 5 to 65% RHL, non-condensing
Storage temperature range -20 to +70 Deg. Centigrade
Storage humidity range 5 to 95% RHL, non-condensing
CAUTION!!
When installing on a 19" rack, avoid hazards by taking care that:
1 It is located within the recommended environmental
conditions, as the operating ambient temperature of a closed or multi unit rack assembly may exceed the room ambient temperature.
2 Once rack mounted, enough air will still flow around the
machine.
3 The machine is placed straight in the correct horizontal
position.
4 You do not overload the circuit(s). When connecting the
machine to the supply circuit, overloading the circuits might have a detrimental effect on overcurrent protection and supply wiring. Refer to the appropriate nameplate ratings for information. For example, for fuse replacement, see the value printed on the product label.
5 The machine is earthed (grounded) in a reliable way and
is connected only to an electricity socket with grounding. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips), and that you use only the power cord that is supplied with the machine.
How to Rack Mount
To rack-mount the machine:
1 Attach both ear brackets to the
machine. To do so, fasten the 5 screws on each side of the machine through the ear bracket via the spacer, securing both ear brackets to the machine.
2 Place the ears of the machine
against the rack rails, and insert the proper screws (not provided) through each of the four holes in the rack ears.
Note that:
 In some models, the front panel may feature built-in rack ears Detachable rack ears can be removed for desktop use Always mount the machine in the rack before you attach any cables or connect the machine to the power If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack Adapters user manual for installation instructions (you can download it at: http://www.kramerelectronics.com)
9
Connecting the VP-727T
10
7 Connecting the VP-727T
To connect the VP-727T to up to four VP-727 machines, as the example in Figure 7 illustrates1, do the following2:
1. Connect the “TO VP-727” RS-485 3-PIN terminal block ports of the VP-727T, as follows (see section 7.1):
 MACH. # 1 to the RS-485 port of the VP-727 which will be recognized as
machine # 1
 MACH. # 2 to the RS-485 port of the VP-727 which will be recognized as
machine # 2
 MACH. # 3 to the RS-485 port of the VP-727 which will be recognized as
machine # 3
 MACH. # 4 to the RS-485 port of the VP-727 which will be recognized as
machine # 4
2. Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity (not illustrated in Figure 7).
Figure 7: Connecting the VP-727T
1 The RS-232 port is for firmware upgrade only, see section 7.2
2 Switch OFF the power on each device before connecting it to your VP-727T. After connecting your VP-727T, switch on its
power and then switch on the power on each device
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-727T
7.1 Connecting via RS-485
When connecting the “TO VP-727” RS 485 3 PIN terminal block ports of the VP-727T, to the respective VP-727 machine, connect the:
 “A” (+) PIN of the VP-727T to the “A” (+) PIN of the VP-727
 “B” (+) PIN of the VP-727T to the “B” (+) PIN of the VP-727
 If shielded twisted pair cable is used, the shield may be connected to the
“G” (Ground) PIN on one of the units
Figure 8: Connecting the VP-727T RS-485 Ports
11
Connecting the VP-727T
12
DB9 (To Presentation
Switcher / Scaler) 
7.2 Connecting a PC (via RS-232)
You can connect a PC (or other controller) to the VP-727T via the RS-232 port for upgrading the firmware.
To connect a PC to a VP-727T unit, using the Null-modem adapter provided with the machine (recommended):
 Connect the RS-232 DB9 rear panel port on the VP-727T unit to the
Null-modem adapter and connect the Null-modem adapter with a 9 wire flat cable to the RS-232 DB9 port on your PC
To connect a PC to a VP-727T unit, without using a Null-modem adapter:
 Connect the RS-232 DB9 port on your PC to the RS-232 DB9 rear panel
port on the VP-727T unit, forming a cross-connection1, as Figure 9 illustrates
DB9 (From PC)
Figure 9: Connecting the PC
7.3 Setting the Machine #
The VP-727T automatically recognizes the MACHINE # of each VP-727 unit.
For example, the VP-727 unit that is connected to the “ TO VP-727” RS 485 port MACH. # 3 is recognized as the third VP-727 unit: MACHINE # 3.
To access this particular VP-727 unit from the VP-727T, press the MACHINE # button2 until the number 3 is selected in the 7-segment LED display3.
1 Also known as a Null-modem connection
2 Item 32 in Figure 1 and Table 1
3 Item 33 in Figure 1 and Table 1
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-727 using the VP-727T
8 Operating the VP-727 using the VP-727T
For details of how to operate the VP-727 via the OSD Menu, LCD Display, ETHERNET, and/or RS-232, including using the TAKE button, refer to the VP-727 user manual1. For details of how to:
 Use the WIPE DIRECTION buttons, see section 8.1
 Adjust the transition speed, see section 8.2
8.1 Using the VP-727T WIPE DIRECTION Buttons
To set the wipe direction, use the WIPE DIRECTION buttons2 (see Table 3):
Table 3: Defining the WIPE DIRECTIONS Buttons
EFFECTS WIPE DIRECTIONS
Wipe
Diagonal
Choice of four directions (only one button is selected)
Choice of four directions (two buttons are selected simultaneously)
Circle
Square
Corner
Chessboard
In
In
In
Out
Out
Choice of four directions (two buttons are selected simultaneously)
Out
1 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
2 Item 18 in Figure 1 and Table 1
13
Technical Specifications
14
8.2 Making the Transition
You can make the transition in two ways:
 Manually, for each separate transition using the T-bar control lever1
 Automatically, via the TAKE button, which implements the transition at
the pace set by the SPEED2 knob
8.2.1 Making a Transition Manually
To make the transition, manually:
 Slide the T-bar handle upwards3 or downwards4
8.2.2 Making a Transition Automatically
To make the transition, automatically:
 Rotate the SPEED knob2 to the right (increasing the transition speed) or to the left (decreasing the transition speed). When the knob is turned to the extreme counter-clockwise position (off), the switch will be engaged to turn the knob off. In this position, the speed setting is controlled via the setting in the VP-727 OSD menu
 Pressing the TAKE button5 causes the transition to occur automatically
9 Technical Specifications
Table 4 includes the technical specifications:
Table 4: Technical Specifications6 of the VP-727T
PORTS: 4 sets of RS-485 3-PIN Terminal Block Ports
CONTROLS: Front panel buttons, RS-232, and RS-485
POWER SOURCE: 12 VDC, 240mA
DIMENSIONS: 19” (W), 3.4” (D), 4RU (H) rack mountable7 WEIGHT: 1.58kg. (3.5 lbs.) approx.
ACCESSORIES: Gooseneck lamp, null-modem adapter, power supply, rack ears
kit8, and table-top brackets
1 Item 23 in Figure 1 and Table 1
2 Item 19 in Figure 1 and Table 1
3 The PREVIEW LED lights (item 21 in Figure 1 and Table 1)
4 The PREVIEW LED lights (item 22 in Figure 1 and Table 1)
5 Item 20 in Figure 1 and Table 1
6 Specifications are subject to change without notice
7 48.2cm (W), 8.6cm (D), 17.7cm (H)
8 A pair of rack ears, two spacers and ten screws
KRAMER: SIMPLE CREATIVE TECHNOLOGY
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defe cts in material or workmanship in this product. The following are not covered by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer d ealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agent s listed in the web site www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction resulting from: i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature ii) Product modification, or failure to follow instructions supplied with the product iii) Repair or attempted repair by anyone not authorized by Kramer iv) Any shipment of the product (claims must be presented to the carrier) v) Removal or installation of the product vi) Any other cause, which does not relate to a product defect vii) Carto ns, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1. Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original d ated invoice (o r a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.
EXCLUSION OF DAMAGES
The liability of Kra mer for any eff ective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:
1. Damage to other pro perty caused by defects in this product, damages based upon inconvenience, loss of use o f the product, loss of time, commercial loss; or:
2. Any other damages, whether incidental, consequent ial or otherwise. Some countries may not allow limitations on how long a n implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so t he above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place. NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer. This equipment has been tested to determine compliance with the requirements of: EN-50081: "Electromagnetic compatibility (EMC);
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
CFR-47: FCC Rules and Regulations:
CAUTION!
Servicing t he machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to
the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.
Use t he supplied DC power supply to feed power to the machine. P lease use recommended interconnection cables to connect the machine to other components.
generic emission standard. Part 1: Residential, commercial and light industry"
Part 1: Residential, commercial and light industry environment".
Part 15: “ Radio frequency devices Subpart B – Unintentional radiators”
15
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000195 REV 1A
Loading...