The specific product description provided with this product documentation is p art of the Kontron
CPCI Power Supply manual. For further information, in particular regarding general details as
well as safety and warranty statements, refer to the CPCI Power Supply Manual, ID 24139.
This power supply is designed for use with standard CPCI systems as well integration in electronic or electrical enclosures (e.g. Kontron’s CP-Pocket, 19” racks, etc.).
2.75W M-Type Power Supply Unit
The main features of the 3U M-type, 75 W output AC power supply unit CP3-SVE-M76AC are
described in the following table:
Table 1: Distinctive Features of Power Supply Unit CP3-SVE-M76AC
FEATURESPECIFICATION
FORM FACTOR
FRONT PANEL SIZE
HEIGHT OF POWER SUPPLY UNIT
WIDTH OF POWER SUPPLY UNIT
DEPTH OF POWER SUPPLY UNIT
MECHANICS
PLUG-IN COMPATIBILITY
POWER SUPPLY CONNECTOR
INPUT VOLTAGE
INPUT FREQUENCY
OUTPUT VOLTAGES / CURRENTS
3U
40.3 mm x 128.4 mm
3 U (128 mm)
8 HP (40 mm)
171.9 mm (without connector and handle)
19” rack
Yes
DIN M24/8 connector
115/230 VAC, automatic switching
47 … 63 Hz
V1 = +5.1 V, max. 8.0 A
V
= +3.3 V, max. 8.0 A
2
= +12 V, max. 0.15 A
V
3
OUTPUT POWER
TOTAL MINIMUM OUTPUT LOAD
COOLING
REDUNDANT SUPPLY CAPABILITY
STAT US INDICATION
SPECIAL FEATURE(S)
75 W
0 W
Forced air cooling: ≥ 0.5 m/s recommended
—
Separate LEDs for V1 and V
None
2
RID 24139 PD13, Rev. 01Page 3
Page 4
PD13: CP3-SVE-M76ACCPCI Power Supply
2.1Mechanical Specifications
Figure 1: View of Power Supply Unit CP3-SVE-M76AC
RID 24139 PD13, Rev. 01Page 4
Page 5
CPCI Power SupplyPD13: CP3-SVE-M76AC
2.2Power Supply Connectors
2.2.1DIN M24/8 Power Supply Connector
Figure 2: Orientation of the DIN
M24/8 Power Supply Connector
The AC power input is via the front
V
panel connector. The
voltages from the power supply unit
to the backplane are connected via a
32-pole DIN 24/8 male power supply
connector.
For the pinouts of the DIN M24/8
power supply connector please refer
to the following table.
This connector is available for applications requiring input power from the front of the chassis.
This is a Phoenix, 3-contact connector (GMSTB 2,5/ 3-GF-7,62). This connector is not designed for “hot-plugging”. The following figure and table provide pinout information.
Figure 3: Front Panel AC Input Power Connector
Table 4-3: Pinout of Front Panel Connector
PINSIGNAL
1L
2N
3PE
2.2.3Line Input Connector
This connector is the complementary connector for the application side for connecting to this
power supply and is delivered with the power supply. This is a Phoenix, 3-contact plug type
connector (GMSTB 2,5/ 3-STF-7,62). The following figure and table provide pinout information.
Figure 4: Line Input Connector
Table 4-4: Pinout of Line Input Connector
PINSIGNAL
1L
2N
3PE
RID 24139 PD13, Rev. 01Page 6
Page 7
CPCI Power SupplyPD13: CP3-SVE-M76AC
2.3Installation
Thanks to its plug-in compatibility this DIN M-type power supply unit allows for an easy installation, by which the power supply unit’s male DIN M24/8 power connector is inserted into the
backplane’s mating female connector without the need of any intermediate adaptation.
2.4Electrical Specifications
Input
Input voltage ranges115/230 VAC, 50/60 Hz, automatic switching
ranges: 90 … 138 VAC or 184 ... 264 VAC
Efficiency> 80 % (typical)
Inrush current limitation
≤ 25 A
≤ 35 A
peak
peak
cold
warm
Fuse3.15 AT (internal, not user serviceable)
Hold-up time115 V: > 30 ms at 100 % load
230 V: > 35 ms at 100 % load
Output
Output power V
(5.1 V)voltage: 5.1 V, +5/-3% (including ripple and noise)
1
current: min 0.0 A; nominal 8.0 A; peak 12 A for 100 ms
Output power V
(3.3 V)voltage: 3.3 V, +5/-3% (including ripple and noise)
2
current: min 0.0 A; nominal 8.0 A; peak 12 A for 100 ms
Output power V
(12 V)voltage: 12 V, +8/-7% (including ripple and noise)
3
current: min 0.0 A; nominal 0.15 A; peak 0.2 A
RippleV
, V2: < 50 mV
1
V3: < 200 mV
pp
pp
Total output loadsmin 0 W; max 75 W for all outputs
Status indicationgreen LEDs for V
, V
1
2
Rise-delay time< 1 s at 115/230 VAC
Start-up time≤ 15 ms
Regulation
Line regulation< 0.2 % for V
Load regulation< 0.5 % for V
, V2 at a load of 8.0 A each
1
, V
1
2
RID 24139 PD13, Rev. 01Page 7
Page 8
PD13: CP3-SVE-M76ACCPCI Power Supply
+5V
+3.3V
voltage: 1V / div.
time: 0.5 ms / div.
Output Power Diagrams
Figure 5: Signal when Switched On
Protection and Control
Overvoltage protection
Overload protectionCurrent limitation: >150 % I
Over temperature protectionSwitches off if inside temperature becomes too high,
Environment
Operating ambient temperature0 °C to + 55 °C (without derating)
Derating 2.0 % / °K between 55 °C and 70 °C
Climatic humidity 93 % RH at 40 °C, non-condensing
Recommended airflow≥ 0.5 m/s
125 %
Thermal shutdown with auto-restart for V
Output permanent short-circuit proof
Adequate thermal cooling of the power supply must be ensured.
Therefore do not obstruct or hinder cooling air circulation or heat conduction within the power supply or surrounding equipment.
Failure to comply with this warning may result in damage to your
equipment.
RID 24139 PD13, Rev. 01Page 9
Page 10
PD13: CP3-SVE-M76ACCPCI Power Supply
This page has been intentionally left blank.
RID 24139 PD13, Rev. 01Page 10
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.