Kontron AT8902M User Manual
AT8902M USER GUIDE
AdvancedTCA
M5305_TECH_2 Manual ID
3.4 Revision Index
19 December, 2007 Date of Issue
AT8902M Preface
Revision History
Publication Title: AT8902M User Guide
ID Number: M5305_TECH_2
Rev.
Index
3.3 Initial Issue AT8902M, based on AT8902 User Guide 3.2 28 March 07
3.4 Clarified LED description in section 3.1.11 Display Elements
Minor corrections in section 3.3
Brief Description of Changes
Date of Issue
19 Dec. 07
Imprint
Kontron may be contacted via the following:
Kontron Canada, Inc. Kontron Modular Computers GmbH
616 Curé-Boivin Sudetenstrasse 7
Boisbriand, Québec 87600 Kaufbeuren
Canada J7G 2A7 Germany
Tel: (450) 437-5682 Tel: +49 (0) 8341 803 0
(800) 354-4223
Fax: (450) 437-8053 Fax: +49 (0) 8341803 330
E-mail: support@ca.kontron.com E-mail: support-kom@kontron.com
For further information about Kontron, our products or services, please visit our Internet web
site: www.kontron.com
Disclaimer
Copyright © 2006 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized. Specifications are subject to change without notice.
Page ii AT8902M User Guide
AT8902M Preface
Table of Content
Revision History .........................................................................................................ii
Imprint ........................................................................................................................ii
Disclaimer ..................................................................................................................ii
Proprietary Note ........................................................................................................ix
Trademarks ...............................................................................................................ix
Environmental Protection Statement .........................................................................ix
Explanation of Symbols .............................................................................................x
For Your Safety ..........................................................................................................x
High Voltage Safety Instructions ...........................................................................xi
Special Handling and Unpacking Instructions ......................................................xi
General Instructions on Usage ............................................................................ xii
Two Year Warranty .................................................................................................. xiii
Chapter
1
1. Introduction .................................................................................................. 1 - 2
1.1 Product Overview .................................................................................... 1 - 2
1.1.1 AT8902M Features ......................................................................... 1 - 3
1.1.2 General compliances ...................................................................... 1 - 4
1.1.3 Optional Accessories ...................................................................... 1 - 4
1.1.4 Hot Swap Capability ....................................................................... 1 - 4
1.1.5 Board Options ................................................................................. 1 - 5
1.2 Technical Specification ........................................................................... 1 - 6
1.3 Software Support ................................................................................... 1 - 12
Chapter
2
2. Installation ................................................................................................... 2 - 2
2.1 Safety Requirements ............................................................................... 2 - 2
2.2 AT8902M Initial Installation Procedures .................................................. 2 - 3
2.3 Standard Removal Procedures ............................................................... 2 - 4
2.4 AMC Installation ...................................................................................... 2 - 4
2.5 Software Installation ................................................................................ 2 - 4
2.6 CLI Quick Start ........................................................................................ 2 - 4
Page iii AT8902M User Guide
AT8902M Preface
Chapter
3
3. Hardware Description .................................................................................. 3 - 2
3.1 Base Board ............................................................................................. 3 - 2
3.1.1 CPU and Memory ........................................................................... 3 - 3
3.1.2 Base Switch .................................................................................... 3 - 6
3.1.3 Fabric Switch Interface ................................................................... 3 - 9
3.1.4 AMC Bays ....................................................................................... 3 - 9
3.1.5 IPMI .............................................................................................. 3 - 12
3.1.6 Synchronization Clock .................................................................. 3 - 13
3.1.7 RTM Interface ............................................................................... 3 - 13
3.1.8 Power Supply ................................................................................ 3 - 15
3.1.9 Reset ............................................................................................ 3 - 17
3.1.10 Jumpers ........................................................................................ 3 - 17
3.1.11 Display Elements .......................................................................... 3 - 19
3.2 Fabric Mezzanine .................................................................................. 3 - 22
3.2.1 Fabric Switch ................................................................................ 3 - 22
3.2.2 IPMI .............................................................................................. 3 - 25
3.2.3 Power Supply ................................................................................ 3 - 25
3.3 AM4310 ................................................................................................. 3 - 26
3.3.1 XFP Ports ..................................................................................... 3 - 27
3.3.2 XAUI to XFI Transceivers ............................................................. 3 - 28
3.3.3 IPMI .............................................................................................. 3 - 29
3.3.4 Power Supply ................................................................................ 3 - 30
3.3.5 Reset ............................................................................................ 3 - 30
3.3.6 Front Plate Elements .................................................................... 3 - 31
Chapter
4
4. Software Description ................................................................................... 4 - 2
4.1 Supported RFCs ..................................................................................... 4 - 2
4.1.1 Management ................................................................................... 4 - 2
Page iv AT8902M User Guide
AT8902M Preface
4.1.2 Switching ........................................................................................ 4 - 4
4.1.3 Routing ........................................................................................... 4 - 5
4.1.4 QoS ................................................................................................. 4 - 6
4.2 Supported MIBs ...................................................................................... 4 - 6
4.2.1 Enterprise MIB ................................................................................ 4 - 6
4.2.2 Switching Package MIBs ................................................................ 4 - 7
4.2.3 Routing Package MIBs ................................................................... 4 - 7
4.2.4 QoS Package MIB .......................................................................... 4 - 7
4.3 Bootloader ............................................................................................... 4 - 7
4.3.1 Power On Self Test ......................................................................... 4 - 8
4.4 IPMI Firmware ....................................................................................... 4 - 10
4.4.1 Sensor Data Record (SDR) .......................................................... 4 - 11
4.4.2 Field Replaceable Unit (FRU) Information .................................... 4 - 14
4.4.3 E-Keying ....................................................................................... 4 - 14
4.4.4 IPMC Firmware Code ................................................................... 4 - 14
4.4.5 LEDs ............................................................................................. 4 - 15
4.4.6 Hot Swap Process ........................................................................ 4 - 16
4.5 Firmware Administration ....................................................................... 4 - 17
4.5.1 Startup Configurations .................................................................. 4 - 18
4.5.2 Updating Firmware ....................................................................... 4 - 19
4.5.3 Updating IPMI ............................................................................... 4 - 22
Appendix
A. Getting Help ................................................................................................. A - 2
A
Page v AT8902M User Guide
AT8902M Preface
List of Tables
1-1 Fabric Interface Options............................................................................... 1- 5
1-2 AT8904M Main Specifications...................................................................... 1- 6
1-3 AM4310 Main Specifications.......................................................................1- 11
1-4 AT8904M Software Specification ............................................................... 1- 13
3-1 PCI Slots ...................................................................................................... 3- 3
3-2 Fast Ethernet Management (RJ45) Pin Assignment.................................... 3- 4
3-3 Fast Ethernet Management (RJ45) LEDs Signification ............................... 3- 4
3-4 Serial Port (RJ45) Pin Assignment .............................................................. 3- 5
3-5 Serial console terminal cable interface: RJ45 Female to DB9 Female ....... 3- 5
3-6 Base Interface Port Mapping ....................................................................... 3- 6
3-7 Base Uplink (J39/J38) Pin Assignment........................................................ 3- 7
3-8 Base Uplink (J39/J38) LEDs Signification.................................................... 3- 7
3-9 AMC Bay Address........................................................................................ 3- 9
3-10 AMC B1 Channel Assignment ..................................................................... 3- 9
3-11 AMC B2 Channel Assignment ................................................................... 3- 10
3-12 J30 Pin Assignment ................................................................................... 3- 14
3-13 J31 Pin Assignment ................................................................................... 3- 14
3-14 Power Connector (P10) ............................................................................. 3- 15
3-15 Power Transients ....................................................................................... 3- 17
3-16 Jumper Settings ( • Default Setting)........................................................... 3- 18
3-17 ATCA LEDs Signification ........................................................................... 3- 20
3-18 Backplane Link LEDs Signification ............................................................ 3- 20
3-19 Switch LED Assignment............................................................................. 3- 21
3-20 Fabric Interface Port Mapping.................................................................... 3- 24
3-21 Fabric Uplink (J40/J41) Pin Assignment .................................................... 3- 25
3-22 Fabric Uplink (J40/J41) LEDs Signification................................................ 3- 25
3-23 XFP Connector Pin Assignment ............................................................... 3- 28
3-24 Fabric Interface 10GbE Port Mapping ....................................................... 3- 30
3-25 Power Consumption................................................................................... 3- 31
3-26 ATCA LEDs Signification ........................................................................... 3- 33
Page vi AT8902M User Guide
AT8902M Preface
4-1 POST routines and error codes ................................................................... 4- 8
4-2 POST Boot Steps......................................................................................... 4- 9
4-3 AT8904M sensors .......................................................................................4- 11
4-4 Additional AT8904M sensors (Mezzanine) ................................................ 4- 13
4-5 LED state ................................................................................................... 4- 15
4-6 OOS LED state .......................................................................................... 4- 15
4-7 Health LED state........................................................................................ 4- 16
4-8 FLASH Partition Scheme (64MB) .............................................................. 4- 17
Page vii AT8902M User Guide
AT8902M Preface
List of Figures
3-1 Functional Block Diagram Base Board ...................................................... 3 - 2
3-2 Block Diagram AMC GbE Cross-connect via update channels ................. 3 - 8
3-3 AT8904M Front Panel .............................................................................. 3 - 19
3-4 Backplane Switch LEDs Signification ...................................................... 3 - 20
3-5 AM4310 Block Diagram ........................................................................... 3 - 26
3-6 AM4310 Front Plate ................................................................................. 3 - 31
Page viii AT8902M User Guide
AT8902M Preface
Proprietary Note
This document contains information proprietary to Kontron AG. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without
the prior written consent of Kontron AG or one of its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct.
However, Kontron AG cannot accept liability for any inaccuracies or the consequences thereof,
or for any liability arising from the use or application of any circuit, product, or example shown
in this document.
Kontron AG reserves the right to change, modify, or improve this document or the product described herein, as seen fit by Kontron AG without further notice.
Trademarks
Kontron AG and the Kontron logo are trade marks owned by Kontron AG, Germany. In addition,
this document may include names, company logos and trademarks, which are registered trademarks and, therefore, proprietary to their respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where
possible. Many of the components used (structural parts, printed circuit boards, connectors,
batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with
applicable country, state, or local laws or regulations.
Page ix AT8902M User Guide
AT8902M Preface
Explanation of Symbols
CE Conformity
This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Please refer also to the section “Applied
Standards” in this manual.
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V) when
touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or
result in damage to your material.
Please refer also to the section “High Voltage Safety Instructions” on the following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their components are
sensitive to static electricity. Therefore, care must be taken during all handling
operations and inspections of this product, in order to ensure product integrity
at all times.
Please read also the section “Special Handling and Unpacking Instructions”
on the following page.
Warning!
This symbol and title emphasize points which, if not fully understood and
taken into consideration by the reader, may endanger your health and/or
result in damage to your material.
Note...
This symbol and title emphasize aspects the reader should read through
carefully for his or her own advantage.
For Your Safety
Your new Kontron product was developed and tested carefully to provide all features necessary
to ensure its compliance with electrical safety requirements. It was also designed for a long
fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation. Therefore, in the interest of your own safety
and of the correct operation of your new Kontron product, you are requested to conform with
the following guidelines.
Page x AT8902M User Guide
AT8902M Preface
High Voltage Safety Instructions
Warning!
All operations on this device must be carried out by sufficiently skilled personnel only.
Caution, Electric Shock!
High voltages are present inside the chassis when the unit’s power cord is
plugged into an electrical outlet. Turn off system power, turn off the power
supply, and then disconnect the power cord from its source before removing
the chassis cover. Turning off the system power switch does not remove
power to components.
Special Handling and Unpacking Instructions
ESD Sensitive Device!
Electronic boards and their components are sensitive to static electricity.
Therefore, care must be taken during all handling operations and inspections
of this product, in order to ensure product integrity at all times.
Do not handle this product out of its protective enclosure while it is not used for operational purposes unless it is otherwise protected.
Whenever possible, unpack or pack this product only at EOS/ESD safe work stations. Where
a safe work station is not guaranteed, it is important for the user to be electrically discharged
before touching the product with his/her hands or tools. This is most easily done by touching a
metal part of your system housing.
It is particularly important to observe standard anti-static precautions when changing mezzanines, ROM devices, jumper settings etc. If the product contains batteries for RTC or memory
back-up, ensure that the board is not placed on conductive surfaces, including anti-static plastics or sponges. They can cause short circuits and damage the batteries or conductive circuits
on the board.
Page xi AT8902M User Guide
AT8902M Preface
General Instructions on Usage
In order to maintain Kontron’s product warranty, this product must not be altered or modified in
any way. Changes or modifications to the device, which are not explicitly approved by Kontron
AG and described in this manual or received from Kontron’s Technical Support as a special
handling instruction, will void your warranty.
This device should only be installed in or connected to systems that fulfill all necessary technical and specific environmental requirements. This applies also to the operational temperature
range of the specific board version, which must not be exceeded. If batteries are present their
temperature restrictions must be taken into account.
In performing all necessary installation and application operations, please follow only the instructions supplied by the present manual.
Keep all the original packaging material for future storage or warranty shipments. If it is necessary to store or ship the board please re-pack it as nearly as possible in the manner in which it
was delivered.
Special care is necessary when handling or unpacking the product. Please, consult the special
handling and unpacking instruction on the previous page of this manual.
Page xii AT8902M User Guide
AT8902M Preface
Two Year Warranty
Kontron AG grants the original purchaser of Kontron’s products a TWO YEAR LIMITED HARDWARE
WARRANTY
implied by anyone on behalf of Kontron are valid unless the consumer has the express written
consent of Kontron AG.
Kontron AG warrants their own products, excluding software, to be free from manufacturing
and material defects for a period of 24 consecutive months from the date of purchase. This warranty is not transferable nor extendible to cover any other users or long-term storage of the
product. It does not cover products which have been modified, altered or repaired by any other
party than Kontron AG or their authorized agents. Furthermore, any product which has been,
or is suspected of being damaged as a result of negligence, improper use, incorrect handling,
servicing or maintenance, or which has been damaged as a result of excessive current/voltage
or temperature, or which has had its serial number(s), any other markings or parts thereof altered, defaced or removed will also be excluded from this warranty.
If the customer’s eligibility for warranty has not been voided, in the event of any claim, he may
return the product at the earliest possible convenience to the original place of purchase, together with a copy of the original document of purchase, a full description of the application the
product is used on and a description of the defect. Pack the product in such a way as to ensure
safe transportation (see our safety instructions).
as described in the following. However, no other warranties that may be granted or
Kontron provides for repair or replacement of any part, assembly or sub-assembly at their own
discretion, or to refund the original cost of purchase, if appropriate. In the event of repair, refunding or replacement of any part, the ownership of the removed or replaced parts reverts to
Kontron AG, and the remaining part of the original guarantee, or any new guarantee to cover
the repaired or replaced items, will be transferred to cover the new or repaired items. Any extensions to the original guarantee are considered gestures of goodwill, and will be defined in
the “Repair Report” issued by Kontron with the repaired or replaced item.
Kontron AG will not accept liability for any further claims resulting directly or indirectly from any
warranty claim, other than the above specified repair, replacement or refunding. In particular,
all claims for damage to any system or process in which the product was employed, or any loss
incurred as a result of the product not functioning at any given time, are excluded. The extent
of Kontron AG liability to the customer shall not exceed the original purchase price of the item
for which the claim exists.
Kontron AG issues no warranty or representation, either explicit or implicit, with respect to its
products’ reliability, fitness, quality, marketability or ability to fulfil any particular application or
purpose. As a result, the products are sold “as is,” and the responsibility to ensure their suitability for any given task remains that of the purchaser. In no event will Kontron be liable for
direct, indirect or consequential damages resulting from the use of our hardware or software
products, or documentation, even if Kontron were advised of the possibility of such claims prior
to the purchase of the product or during any period since the date of its purchase.
Please remember that no Kontron AG employee, dealer or agent is authorized to make any
modification or addition to the above specified terms, either verbally or in any other form, written
or electronically transmitted, without the company’s consent.
Page xiii AT8902M User Guide
AT8902M Introduction
Chapter
1
Introduction
Page 1 - 1 AT8902M User Guide
AT8902M Introduction
1. Introduction
The Board described in this manual is designed for the Advanced Telecom Computing Architecture (AdvancedTCA® or ATCA) defined by the PCI Industrial Computer Manufacturers
Group (PICMG). The main advantages of AdvancedTCA include high throughput, multi-protocol support, high-power capability, hot swappability, high scalability and integrated system
management. For further information regarding the AdvancedTCA standards and their use,
please consult the complete AdvancedTCA specification or visit the PICMG web site.
1.1 Product Overview
The Kontron AT8902M is a PICMG 3.0 and 3.1 compliant Hub Board for AdvancedTCA
shelves, designed according to the RoHS directive. Suitable for dual-star and full-mesh configurations in 14 and 16 slot systems, it also provides 2 mid-size AMC slots for customization. This
unique versatile design allows cost-optimised tailoring to the requirements of the application.
The Base Interface switch provides Gigabit Ethernet services on Base Channels 2-16 and Fast
Ethernet to the Shelf Managers. The Fabric Interface switch provides dual Gigabit Ethernet services to the second, redundant Hub Board and to payload slots 2-5 and single Gigabit Ethernet
services to payload slots 6-15.
AMC slots can be equipped with
• Processor-AMC, e.g. acting as the system controller (saving one ATCA slot)
• Storage-AMC as mass storage device for the Processor-AMC
• Master Clock Generator AMC providing network synchronisation for telecom applications
• Dual 10GbE Fabric Inter-Link-AMC to enable multi-shelf AdvancedTCA systems
Performance
The AT8902M employs leading-edge switching technology providing full wire-speed throughput at all load conditions. A powerful control processor runs higher layer protocols based on the
market leading LVL7 software suite.
Flexibility
The Fabric Interface is realized as a mezzanine on the base board. Therefore the AT8902M
can easily be adapted to customer requirements without re-engineering the whole board, thus
minimising time-to-market. Options include using Ethernet, Ethernet + Fibre Channel, PCI-Express or Advanced Switching on the Fabric Interface.
Management
The AT8902M is managed either in-band or out of band via 10/100 Ethernet or RS232 management ports. The comprehensive set of supported protocols rounds out the feature set of
Kontrons' second generation AdvancedTCA Hub Board.
Page 1 - 2 AT8902M User Guide
AT8902M Introduction
1.1.1 AT8902M Features
PICMG 3.0 compliant Hub Board
• Supports Base Interface (GbE)
• Supports Fabric Interface (1xGbE/2xGbE)
• For 14 and 16 slot shelves
• 2 mid-size AMC slots for customization
• Uplinks for Base and Fabric Interface
• Comprehensive protocol support
• Full Hot-Swap capabilities
• Full Redundancy support
Base Interface (PICMG 3.0)
• Non-blocking layer 2/3 switching/routing
• 4x10/100/1000BASE-T uplinks on front panel
• 2xGbE connection to AMC slot B1
• 1xGbE connection to AMC slot B2
Fabric Interface (PICMG 3.1)
• Non-blocking layer 2 switching with VLANs
• Dual GbE services to redundant Hub Board
• Dual GbE services to payload slots 2-5
• GbE service to payload slots 6-15
• 4x10/100/1000BASE-T uplinks on front panel
• Dual 10GbE connection to each AMC slot
Management and Protocols
• Management via SNMP, TELNET, CLI
• In-band
• Out of band via Ethernet or RS232
• IPMI version 1.5
• Ethernet/Bridging protocols include
• Link aggregation (802.3ad)
• VLANs (802.1Q)
• Spanning tree (802.1D, 802.1w)
• QoS (802.1p)
• Flow control (802.3x)
•GVRP, GMRP
Page 1 - 3 AT8902M User Guide
AT8902M Introduction
• Routing protocols include
• OSPFv2
•RIPv2
•VRRP
•DiffServ
•ARP
1.1.2 General compliances
The AT8902M conforms to the following specifications:
• PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0
• PICMG 3.1 Gigabit Ethernet for AdvancedTCA Systems, Revision 1.0
• AMC.0 AMC Base Specification, Revision 2.0
• AMC.2 AMC Gigabit Ethernet / 10 Gigabit XAUI Ethernet
• AMC.3 AMC Storage
• IPMI v1.5 Intelligent Platform Management Interface Specification
1.1.3 Optional Accessories
1.1.3.1 AMC
Two standard mid-size single width AMC bays for standard or custom AMCs are implemented.
AMC slots can be equipped with a
• Processor-AMC, e.g. acting as the system controller (saving one ATCA slot)
• HDD-AMC as mass storage device for the Processor-AMC
• Master Clock Generator AMC providing network synchronisation for telecom applications
• AM4310 Dual 10GbE Uplink AMC to enable multi-shelf AdvancedTCA systems (see
chapter 3.3)
1.1.3.2 RTM
RTM is optional. For further information on RTM, please refer to chapter 3.1.7.
1.1.4 Hot Swap Capability
The board supports Full Hot Swap capability as required by PICMG 3.0 R2.0. It can be removed
from or installed in the system while it is on (without powering-down the system). Please refer
to the PICMG 3.0 R2.0 specification for additional details.
Page 1 - 4 AT8902M User Guide
AT8902M Introduction
1.1.5 Board Options
The Kontron ATCA Hub family is available with different Fabric Mezzanine options. Mid-size
and Full-size AMCs are supported.
Table 1-1: Fabric Interface Options
Product AMC Size Fabric Interface
AT8901M Mid-size none
AT8902M Mid-size Gigabit Ethernet
AT8904M Mid-size 10 Gigabit Ethernet
AT8901 Full-size none
AT8902 Full-size Gigabit Ethernet
The AT8902M base board and the Gigabit Ethernet fabric mezzanine are described in
Chapter 3.
The Base Interface switch can be one of the following:
Table 1-2: Base Interface Options
Base Switch AT8902M Flavour
BCM56500 Full featured (enhanced QoS)
BCM56300 Lite featured
Six different Gigabit Ethernet fabric mezzanines provide several combinations of protocol support and 10 GbE uplinks:
Table 1-3: GbE Fabric Mezzanine Options
Fabric Switch Protocol Support 10 GbE Uplinks
BCM56300 Layer 3 none
BCM56302 Layer 3 2 (AMC B2)
BCM56304 Layer 3 4 (AMC B1 and B2)
BCM56500 Layer 3, enhanced QoS none
BCM56502 Layer 3, enhanced QoS 2 (AMC B2)
BCM56504 Layer 3, enhanced QoS 4 (AMC B1 and B2)
Page 1 - 5 AT8902M User Guide
AT8902M Introduction
1.2 Technical Specification
Table 1-4: AT8902M Main Specifications
AT8902M SPECIFICATIONS
PowerPC IBM PPC 405
GPr 400MHz
Processor and Memory
• IBM PowerPC® 405 32-bit RISC processor core operating up to 400MHz with
16KB I- and D-caches
• PC-133 synchronus DRAM (SDRAM) interface
• 40-bit interface serves 32 bits of data plus 8 check bits for ECC applications
• 4KB on-chip memory (OCM)
• DMA support for external peripherals, internal UART and memory
• Scatter-gather chaining supported
• Four channels
• PCI Revision 2.2 compliant interface (32-bit, up to 66MHz)
• Ethernet 10/100Mbps (full-duplex) support with media independent interface
(MII)
• Two serial ports (16550 compatible UART)
• Internal processor local Bus (PLB) runs at SDRAM interface frequency
• IEEE 1149.1 (JTAG) boundary scan
Page 1 - 6 AT8902M User Guide
AT8902M Introduction
Table 1-4: AT8902M Main Specifications (Continued)
AT8902M SPECIFICATIONS
Broadcom 5650x/5630x
GbE Switch
Ethernet
Broadcom 5466R
PHY
• 24 10/100/1000 Mbps Ethernet ports
• Fifth generation of StrataSwitch and StrataXGS product line
• Line-rate switching for all packet sizes and conditions
• On-chip data packet memory and table memory
• IPv6 routing and tunneling
• Advanced Fast Filter Processor (FFP) Content Aware classification
• Advanced security features in hardware
• Port-trunking and mirroring supported across stack
• Advanced packet flow control:
• Head-of-line-blocking prevention
• Back pressure support
• Eight QoS queues per port with hierarchical minimum/maximum shaping per
Class of Service (CoS) per queue per port
• Standard compliant 802.1ad provider bridging
• IEEE 1149.1 (JTAG) boundary scan
• Advanced power management Line-side and MAC-side loopback
• Ethernet@WireSpeed
• Cable plant diagnostics that detects cable plant impairments
• Automatic detection and correction of wiring pair swaps, pair skew, and pair po-
larity
• Robust CESD tolerance and low EMI emissions
• Support for jumbo packets up to 10 KB in size
• IEEE 1149.1 (JTAG) boundary scan
Backplane (Zone 2) • Fabric channels 1-5: 2x GbE (1000BASE-BX)
• Base channel 1: 2 x Ethernet to ShMCs (10/100BASE-T)
• Base channels 2-16: 1 x GbE (1000BASE-T)
• CLK 1/2/3 (A/B)
• Update channels: 2 x GbE (1000BASE-BX)
RTM (Zone 3)
• 8 generic RTM channels from AMC Slot B1, 4 from B2
• SAS/SATA/FC interface for mass storage from each AMC Slot
Interfaces
• I2C IPMI connection
Front panel
• Serial port for management of PPC
• Fast Ethernet for management of PPC
• 4 RJ45 10/100/1000BASE-T Base Interface Uplinks
• 4 RJ45 10/100/1000BASE-T Fabric Interface Uplinks
Page 1 - 7 AT8902M User Guide
AT8902M Introduction
Table 1-4: AT8902M Main Specifications (Continued)
AT8902M SPECIFICATIONS
Mechanical • 8U form factor mechanically compliant to PICMG 3.0
• Single Slot (6HP)
• 2 standard mid-size/single width AMC Slots
• 280 mm x 322 mm (11.024“ x 12.677“)
• Weight: 2.1 kg (4.6 Ibs)
Power Requirements
• Typical: 65W
• Maximum (with 2 AMCs and RTM): 175W
• AMCs may consume up to 75W
• Operating Voltage: -38 to -72VDC
Temperature Designed to meet or exceed the following (Characteristics with AMC):
• Air Flow: 30 CFM min
• Operating: 0°C to +55°C (32°F to 131°F)
• Non-operating: -40°C to +70°C (-40°F to 158°F)
Humidity Designed to meet or exceed the following:
General
• Bellcore GR63, Section 4.1
• Operating: 15%-90% (non-condensing) at 55°C (131°F)
• Non-Operating: 5%-95% (non-condensing) at 40°C (104°F)
Altitude Designed to meet or exceed the following:
• Operating: 4000 m (13123 ft)
• Non-Operating: 15000m (49212 ft)
Vibration Designed to meet or exceed the following:
• Bellcore GR-63, Section 4.4
• Operating: 1.0G, 5-500Hz each axis
• Non-operating: 0.5G, 5-50Hz; 3.0G, 50-500Hz each axis
Shock Designed to meet or exceed the following:
• DIN/IEC 60068-2-27
• Bellcore GR-63, Section 4.3
• 30G, half-sine 11ms, each axis
Page 1 - 8 AT8902M User Guide
AT8902M Introduction
Table 1-4: AT8902M Main Specifications (Continued)
AT8902M SPECIFICATIONS
Safety Designed to meet or exceed the following:
• UL 60950, 3rd edition
• EN 60950
• LVD 73/23/EEC
• Denan Law
EMC Designed to meet or exceed the following:
General
• FCC 47 CFR Part 15, Subpart B
• EN55022, EN55024
• EN 300 386
Reliability
LEDs • ATCA LEDs:
• MTBF: > 146,000 hours @ 40°C / 104°F (Telcordia SR-332, Issue 1)
• 4 LEDs ("Ready for Hot Swap", "Out of Service", "Healthy", "Heart Beat")
• Ethernet:
• Shielded RJ-45 connectors with integrated LED's
• Base Ports :
• 4x/4x Shielded RJ-45 connectors with integrated LED's
• User LEDs:
• 4 LEDs ("Base Status", "Base Selected", "Fabric Status", "Fabric Selected")
• Switch LEDs:
• 16 LEDs (activity and link status for base or fabric channels, respectively)
HW Monitoring
Board Management
• Display switch:
• switches between fabric or base switch port status display
• Based on IPMI 1.5
• FRU Management
• Sensors (Voltage, Current, Temperature, Fuse)
• Status and Alerting
• Hot Swap
• Electronic Keying of Base and Fabric Interfaces
Page 1 - 9 AT8902M User Guide
AT8902M Introduction
Table 1-5: AM4310 Main Specifications
AM4310 SPECIFICATIONS
Broadcom 8704
10GbE PHY
• 4-Lane XAUI Interface (3.125 Gbps)
• XFP Interface
• Loss of signal detection
Ethernet
• Standard compliant 802.3ae
• IEEE 1149.1 (JTAG) boundary scan
XAUI Interface (AMC
Connector)
• Fabric Fabric channels 1-5: 2 x GbE (1000BASE-BX)
• Fabric channels 6-15: 1 x GbE (1000BASE-BX)
• channels 4-11: 2 x 10GbE
Interfaces
Front panel
Mechanical • Standard full height/single width AMC compliant to PICMG 3.0
• Fabric channel 12: XG management interface (MDIO)
• 2 XFP cages
• 73.6 mm x 180.7 mm (2.898“ x 7.114“)
Power Requirements
• 65Maximum: 24W175
• Operating Voltage: 3.0 to 3.6V Management, 10 to 14V Payload
Temperature Designed to meet or exceed the following:
• Air Flow: 30 CFM min
• Operating: 0°C to +55°C (32°F to 131°F)
• Non-operating: -40°C to +70°C (-40°F to 158°F)
Humidity Designed to meet or exceed the following:
• Bellcore GR63, Section 4.1
• Operating: 15%-90% (non-condensing) at 55°C (131°F)
• Non-Operating: 5%-95% (non-condensing) at 40°C (104°F)
General
Altitude Designed to meet or exceed the following:
• Operating: 4000 m (13123 ft))
• Non-Operating: 15000m (49212 ft)
Vibration Designed to meet or exceed the following:
• Bellcore GR-63, Section 4.4
• Operating: 1.0G, 5-500Hz each axis
• Non-operating: 0.5G, 5-50Hz; 3.0G, 50-500Hz each axis
Shock Designed to meet or exceed the following:
• DIN/IEC 60068-2-27
• Bellcore GR-63, Section 4.3
• 30G, half-sine 11ms, each axis
Page 1 - 10 AT8902M User Guide
AT8902M Introduction
Table 1-5: AM4310 Main Specifications (Continued)
AM4310 SPECIFICATIONS
Safety Designed to meet or exceed the following:
• UL 60950, 3rd edition
• EN 60950
• LVD 73/23/EEC
• Denan Law
EMC Designed to meet or exceed the following:
General
• FCC 47 CFR Part 15, Subpart B
• EN55022, EN55024
• EN 300 386
Reliability
LEDs • ATCA LEDs:
• MTBF: > 650,000 hours @ 40°C / 104°F (Telcordia SR-332, Issue 1)
• 3 LEDs ("Ready for Hot Swap", "Out of Service", "Healthy")
• XFP LEDs:
• 2 LEDS (Link for each XFP)
Board Management
• Based on IPMI 1.5
• FRU Management
HW Monitoring
• Sensors (Voltage, Temperature)
• Status and Alerting
• Hot Swap and Fabric
Page 1 - 11 AT8902M User Guide
AT8902M Introduction
1.3 Software Support
The following table contains information related to software supported by the AT8902M.
Table 1-6: AT8902M Software Specification
AT8902M SPECIFICATIONS
General • Reliable field upgrades for all software components
• Dual boot images with roll-back capability
• Management via SNMP and Command Line Interface
• System access via TELNET, SSH and serial line
• Hot-Swap support
• Hot-Plug support for AMC modules
• Redundancy support for base and extension fabric switches
• IP router on the base fabric
• Support for managing the optional MCG and XAUI uplink AMC modules
• Modular software architecture to enable project specific customization
Ethernet/Bridging (Base and
extension fabric switches)
IP Routing
• Static link aggregation (IEEE 802.3ad) on any port combination
• Classic and rapid spanning tree algorithms supported (IEEE 802.1D, IEEE 802.1w)
• Quality Of Service on all ports (IEEE 802.1p)
• Full Duplex operation and flow control on all ports (IEEE 802.3x)
• Static MAC filtering
• Port Authentication (IEEE 802.1X)
• Auto negotiation of speeds and operational mode on all external GbE interfaces as
well as on all base fabric interfaces
• Layer 2 multicast services using GARP/GMRP (IEEE 802.1p)
• VLAN support including VLAN tagging (IEEE 802.3ac), dynamic VLAN registration
with GARP/GVRP (IEEE 802.1Q) and Protocol based VLANs (IEEE 802.1v)
• Double VLAN tagging
• Port Mirroring
• Redundancy of routing functionality using a second switch hub board
• IPv4 Forwarding on all base channels and connected uplink ports
• Quality of service according to the DiffServ standards
• ARP for all routable interfaces
• ICMP for all routable interfaces
• OSPF routing protocol version 2
• RIP routing protocol version 2
• VRRP (virtual router redundancy protocol) for transparent fail over of default routers
• IGMP snooping
Page 1 - 12 AT8902M User Guide
AT8902M Introduction
Table 1-6: AT8902M Software Specification (Continued)
AT8902M SPECIFICATIONS
QoS
Applications
Supported MIBS
• CoS (Class of Service )
• DifffServ (Differentiated Services)
• ACL (Access Control List)
• NTP client for retrieving accurate time and date information
• DHCP server
• Onboard event management
• Test and trace facilities
• POST (power on self tests) diagnostics
• Standards based SNMP implementation supporting SNMP v1, v2 and v3 for
monitoring and management purposes
• IPMI based management of the onboard AMC slots (AMC.*)
• Persistent storage of configuration across restarts
• Support for retrieving and installing multiple configurations
• Support for hot-plugging of the hub board as well as AMCs
• Switching Package MIBs
• RFC 1213 - MIB-II
• RFC 1493 - Bridge MIB
• RFC 1643 - Ethernet-like -MIB
• RFC 2233 - The Interfaces Group MIB using SMI v2
• RFC 2618 - RADIUS Authentication Client MIB
• RFC 2620 - RADIUS Accounting MIB
• RFC 2674 - VLAN & Ethernet Priority MIB
• RFC 2819 - RMON Groups 1,2,3 & 9
• RFC 3291 - Textual Conventions for Internet Network Addresses
• IANA-ifType-MIB
• IEEE 802.1X MIB (IEEE8021-PAE-MIB)
• IEEE 802.3AD MIB (IEEE8021-AD-MIB)
• Routing Package MIBs
• IANA-Address-Family-Numbers-MIB
• RFC 1724 - RIP v2 MIB Extension
• RFC 1850 - OSPF MIB
• RFC 2787 - VRRP MIB
• QoS Package MIB
• RFC 3289 - DIFFSERV-MIB & DIFFSERV-DCSP-TC MIBs
• FASTPATH Enterprise MIB
• Support for all managed objects not contained in standards based MIBs.
Page 1 - 13 AT8902M User Guide
AT8902M Introduction
Table 1-6: AT8902M Software Specification (Continued)
AT8902M SPECIFICATIONS
Bootloader u-boot Version 1.1.2
• POST
• multi image support
• loadable bootimage via network (bootp/tftp)
• reliable field upgradable
• H/W protected
• KCS interface to IPMC
• serial console support
Operating System
• MontaVista Linux Professional Edition 3.1
Page 1 - 14 AT8902M User Guide
AT8902M Installation
Chapter
2
Installation
Page 2 - 1 AT8902M User Guide
Loading...