Whiteness Index
Check the whiteness of foods or raw materials. Measure solids, pastes, or powders.
Whether a food's color is good or bad can influence consumer purchases. Since color variations of white are especially obvious, it has become increasingly important to control color from raw materials through the manufacturing process. Furthermore, there is a growing need to quantify what effect storage during transportation has on the whiteness of a product.
Fits in the Palm of
your Hand
Battery Operated
Lightweight
Low Price
Simple to Use
Color Reader Whiteness Index CR-14
Simple operation |
Compact size and |
|
light weight |
||
|
Only the functions necessary for use are provided. Even first-time users operate it easily.
1
Switch on the power.
2
Select the displav mode.
3
Perform white calibration.
4
Place on sample and press button.
5
Measurement results are shown in the display.
The compact design fits in the palm of your shand. The CR-14 is also battery operated, so you can take it almost anywhere.
Functions for convenient measurements
Protective Cap allows direct measurements of powders or pastes without the need for filling a cell.
Serial Printer Output
Either four AA-size batteries or AC adapter can be used
Vinyl Cover (optional accessory) protects CR-14
against dust.
Display examples CIE Whiteness index.
An international method for expressing whiteness. The W value indicates the degree of whiteness, and the T value indicates the tint.
Yxy values can also be displayed in CIE Mode.
Hunter Whiteness Index.
ASTM D1925 Yellowness Index and ASTM E313 Whiteness and Yellowness Indices can also be displayed.
Specifications
Illuminating/viewing geometry |
8/d (8˚ illumination angle/diffuse viewing: specular component excluded) |
Measuring area |
Approx. Ø8mm |
Display modes |
Whiteness Index: CIE, Hunter, ASTM E313 |
|
Yellowness Index: ASTM E313, ASTM Dl925 |
|
Yxy (Displayable in CIE display mode) |
Repeatability |
Standard deviation of Whiteness Index: CIE: 0.5, Hunter: 0.1 |
|
(Measurement conditions: When measuring white calibration plate) |
Minimum interval between measurements |
Approx. 1 sec. |
Power source |
Four AA-size batteries or optional AC Adapter AC-A12 |
Battery life |
Alkaline-manganese batteries: Approx.2000 measurements at10-sec. Intervals |
|
Ni-Cd batteries: Approx. 600 measurements at 10-sec intervals |
Operating temperature/humidity range |
Temperature: 0 to 40˚C;relative humidity 85% or less (at 35˚C) with no condensation |
Storage temperature/humidity range |
-20 to 55˚C; relative humidity 85% or less (at 35˚C) with no condensation |
Standard accessories |
White Calibration Plate CR-A74, Soft Case CR-A68; Protective Cap CR-A79; |
|
Wrist Strap CR-A73; AA-size batteries (4) |
Optional accessories |
AC Adapter AC-A12; AC Adapter AC-A21 (for Korea); Printer Cable CR-A75: Vinyl Cover CR-A80 |
Specifications are subject to change without notice.
*Measurements of specimens which include fluorescent materials are not recommended.
Dimensions
159
59 |
85 |
|
35 |
|
29.5 |
59 X 159 X 85mm (2-5/16 X 6-1/4 X 3-3/8 in.) Weight: 370g (12.7 oz.) not including batteries
ã1996 KONICA MINOLTA SENSING, INC. |
9242-4856-41 AGMDPK 13 Printed in Japan |