Konica Minolta bizhub press C1060, bizhub press C1070P, bizhub press C1070 User Manual
bizhub PRESS C1070/C1070P/C1060 Contents-1
Contents
1 Introduction
1.1 Introduction ..................................................................................................................................... 1-2
1.2 Safety Precautions.......................................................................................................................... 1-3
1.2.1 Notices for Safety .............................................................................................................................. 1-3
1.2.2 Precautions When Replacing Units ................................................................................................... 1-4
1.2.3 Warning and Caution Labels.............................................................................................................. 1-6
2 Installing Fusing Unit EF-103
2.1 Replacement Parts ......................................................................................................................... 2-2
2.2 Installation Procedures .................................................................................................................. 2-3
2.2.1 Installing EF-103 on the Main Body................................................................................................... 2-3
2.2.2 Installing Parts in the Tray.................................................................................................................. 2-5
3 Removing Fusing Unit EF-103
3.1 Removal Procedures ...................................................................................................................... 3-2
3.1.1 Removing EF-103 from the Main Body.............................................................................................. 3-2
3.1.2 Removing Parts from the Tray ........................................................................................................... 3-5
4 Copy/Print Operation
4.1 Loading Envelopes in the Tray....................................................................................................... 4-2
4.2 Copy Operation ............................................................................................................................... 4-4
4.3 Print Operation ................................................................................................................................ 4-9
5 Specifications
5.1 Specifications of Fusing Unit EF-103 ............................................................................................ 5-2
1
Introduction
bizhub PRESS C1070/C1070P/C1060 1-2
1.1 Introduction
1
1 Introduction
1.1 Introduction
Notice to Users of Fusing Unit EF-103
When replacing the machine units, please follow the instructions described in the User's Guide.
To perform replacement tasks safely and reliably, keep this User's Guide and do not lose them If you lose the
document, please contact your service representative.
Registered Trademarks
KONICA MINOLTA, the KONICA MINOLTA logo, the symbol, and Giving Shape to Ideas are registered trademarks or trademarks of KONICA MINOLTA, INC.
bizhub PRESS is a registered trademark or trademark of KONICA MINOLTA, INC.
Copyright © 2013 KONICA MINOLTA, INC.
bizhub PRESS C1070/C1070P/C1060 1-3
1.2 Safety Precautions
1
1.2 Safety Precautions
1.2.1 Notices for Safety
The followings are what you need to follow to safely replace the units. Please be sure to read the precautions
before replacing the units.
- Keep the User's Guide at hand for your future reference and be careful not to lose it.
- Make sure you follow the safety precautions listed in the User's Guide.
Meanings of Indicators
The various types of indicators are used as warning in the User's Guide and on the product labels to prevent
injury to you and other and damage to property.
The table below lists symbols and their meanings.
Meanings of Symbols
Failure to heed this warning could cause serious injury or even
death.
Failure to heed this caution could result in injury or damage to property.
A triangle indicates a danger against which you should take precaution. You can find
details of the precautions depicted within into the symbol.
(Example) A symbol representing "High Temperature"
A diagonal line indicates a prohibited course of action. You can find specific forbidden
actions within or near the symbols.
(Example) A symbol representing "Prohibition of Disassembly"
This symbol indicates an imperative course of action. You can find specific instructions within the symbols.
(Example) A symbol meaning "Unplug the Power Cord"
bizhub PRESS C1070/C1070P/C1060 1-4
1.2 Safety Precautions
1
1.2.2 Precautions When Replacing Units
Preparation Tasks Before Replacing Units
Unit Replacement Tasks
When replacing the units, be sure to receive instructions from our
customer engineer, read the User' Guide in entirety and perform
tasks in the specified order with appropriate tools. Do not perform
any tasks that are not described in the User's Guide. Failure to fol
low specified order or use appropriate tools could result in injury
or physical damage to the product.
Please be careful when handling the fusing unit since it can be
very hot. It could cause a burn.
Do not drop metal pieces such as clips, staples and screws inside
the product or into crevices in it.
They could cause a short-circuit in the product, resulting in an
electric shock or a fire.
Ensure cables are not pinched or damaged.
It could cause an electric shock or a fire due to electric leakage.
Do not place the unit removed in the replacement tasks on an unstable table or sloped surface, or in a location subject to excessive
shocks or vibrations. It could drop or fall and may cause personal
injury.
Please pay careful attention to the surroundings when placing the
unit removed in the replacement tasks.
Protruding portions, cords or wires of the unit may cause falling or
personal injury.
bizhub PRESS C1070/C1070P/C1060 1-5
1.2 Safety Precautions
1
Power Plug
Actions in Response to Troubles
Do not unplug or plug in the power cord with a wet hand,
as you could receive an electrical shock.
Plug the power cord all the way into the power outlet.
Failure to do this could result in a fire or an electrical shock.
Do not tug the power cord when unplugging. Tugging the cord to
do this could damage it, resulting in a fire, electrical shock, or
breakdown.
Do not place any objects around the power plug, as the power
plug may be difficult to pull out when an emergency occurs.
Remove the power plug from the outlet more than one time a year
and clean the area between the plug terminals. Dust that accumu
lates between the plug terminals may cause a fire.
If it becomes inordinately hot or emits smoke, or an unusual odor
or noise, immediately turn off the power switch of the product, and
then unplug the power cord from the outlet and contact your au
-
thorized customer engineer.
If this produt has been dropped or the covers damaged, immediately turn off the power switch of the product, and then unplug the
power cord from the outlet and contact your authorized customer
engineer. If you continue using it in this condition, a fire or electri
cal shock could result.
The inside of this product has areas subject to high temperature,
which may cause burns. When inspecting the inside of the product
such as when replacing the units, do not touch the locations
(around the fusing unit, etc.) which are indicated by a "High Tem
perature" caution label.
bizhub PRESS C1070/C1070P/C1060 1-6
1.2 Safety Precautions
1
1.2.3 Warning and Caution Labels
This machine has warning label, caution labels and indicators for safety precaution in the following location.
These labels and indicators advise you to pay special attention to avoid any dangerous situations or serious
injury when you replace the units.
7CAUTION
DO NOT remove warning or caution labels.
- Should any warning or caution label be removed, you may fail to check a specific part to be alert for
unexpected trouble or injury. If you find any warning or caution label removed or illegible due to soilage,
please contact your service representative.
7CAUTION
DO NOT touch the fusing part of the fixing conveyance unit.
- Otherwise, you may get burned. Please be especially careful in withdrawing the fixing conveyance unit
or opening the fusing part.
- Since the rear handle of the fusing unit is subject to very high temperature, be sure to wait 50 minutes
or longer after pulling out the ADU drawer to continue the replacement of fusing units.
2
Installing Fusing Unit EF-103
bizhub PRESS C1070/C1070P/C1060 2-2
2.1 Replacement Parts
2
2 Installing Fusing Unit EF-103
When replacing the fusing unit, follow the precautions below to perform the task.
NOTICE
When replacing the fusing unit, be sure to receive instructions from our customer engineer.
NOTICE
Please do not dispose of the packaging box of EF-103. Keep the packaging box and reuse it to store the
replaced fusing unit.
NOTICE
With EF-103 installed, only tray 5 (the lower tray) of Paper Feeder Unit PF-707 can be used as a paper source.
All the other trays are unavailable.
7WARNING
- To avoid danger of suffocation, keep the plastic bag away from babies and children. Please discard the
packaging material after unpacking.
2.1 Replacement Parts
PN Name Shape Q’ty
1 Fusing Unit EF-103 1
2 Auxiliary guide 2
3 Positioning screw 4
bizhub PRESS C1070/C1070P/C1060 2-3
2.2 Installation Procedures
2
2.2 Installation Procedures
2.2.1 Installing EF-103 on the Main Body
1 Turn off the machine's sub and main power switches, and then unplug the power cord from the outlet.
% Be sure to turn off the sub power switch first.
2 Open the front door [1].
3 To pull out the ADU [3], push the lock [2] of the ADU release
lever M1 [1] to the left, then turn the ADU release lever M1 [1]
counterclockwise.
NOTICE
Please confirm that process unit has not been pulled out
when pulling out the ADU drawer.
4 Open the paper exit guide [2] while releasing the lever M6 [1]
at the bottom.
Loosen the screw [3] (1 piece).
Loading...