Page 1
Features
•
Includes face plate with handle, bath spout, shower arm with
flange and showerhead.
•
Single handle controls both on/off activation and temperature
setting.
•
Supplied with ADA compliant metal lever handle.
•
Includes diverter bath spout with 1/2" copper slip fit connection.
•
Includes single function 2.5 gpm (9.5 l/min) showerhead with
Katalyst® Air Induction Technology.
•
Showerhead features MasterClean™ sprayface for easy
cleaning.
•
Complements the Devonshire faucet and accessory collections.
Devonshire
®
Rite-Temp® Bath and Shower Valve Trim
K-TS395-4S
Material
•
Premium material construction with metal handle ensures
reliability and durability.
•
KOHLER finishes resist corrosion and tarnishing, exceeding
industry durability standards.
Installation
•
Trim set requires valve to complete installation.
Required Accessories
K-304/K-P304 Series Rite-Temp® Valves
or
K-8304/K-P8304 Series Rite-Temp® Valve & Cartridge Kits
or
K-8300/K-P8300 Series Rite-Temp® Valve Body Rough-ins
K-8305/K-P8305 Series Rite-Temp® Cartridges
or
K-2971-KS 3/4" Pressure-balancing Valve
Optional Accessories
K-10350 Deep Rough-In Kit For K-8305 Cartridges
K-10351 Test Cap For K-8300 Series Valve Bodies
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Polished NickelSN
Vibrant® Polished BrassPB
Vibrant® Brushed NickelBN
Vibrant® Brushed BronzeBV
Oil-Rubbed Bronze2BZ
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-31-2017 07:35
Page 2
1/2"
Devonshire
®
Rite-Temp® Bath and Shower Valve Trim
K-TS395-4S
Technical Information
All product dimensions are nominal.
Showerhead:
2.5 gal/min (9.5 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
Notes
Install the product according to the installation
guide.
NOTICE: Risk of product damage. Long screws
for installing trim can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout. Elbow must be
a 90 degree drop ell that is secured to rigid
framing.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-31-2017 07:35
Loading...