Kohler K878S0 User Manual
HIGHBRIDGETM
Features
Cast iron with Safeguard
•
Drop-in with three-sided flange
•
Available with or without an enameled apron
•
60″ (152.4 cm) x 32″ (81.3 cm) x 17-1/2″ (44.5 cm)
•
®
finish
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ICC/ANSI A117.1
•
CSA B651
•
OBC
•
ASME A112.19.1/CSA B45.2
•
Specified Model
K-877
ALSO K-877-S, K-878, K-878-S
ADA CSA B651
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
BATH
OBC
Model Description Colors/Finishes
K-877 Bath – left drain ❑ 0 ❑ Other_____
K-877-S Bath – for use with custom storage, left drain ❑ 0 ❑ Other_____
K-878 Bath – right drain (shown) ❑ 0 ❑ Other_____
K-878-S Bath – for use with custom storage, right drain ❑ 0 ❑ Other_____
Required Accessories
K-7214 Clearflo cable bath drain, less PVC tubing ❑ CP ❑ Other_____
K-7261 Fitting/pipe kit ❑ NA
Product Specification
The bath shall be made of cast iron with Safeguard®finish. Bath shall be 60″ (152.4 cm) in length, 32″ (81.3 cm) in width, and
17-1/2″ (44.5 cm) in height. Bath shall be drop-in with three-sided flange. Bath shall be for alcove installations. Bath shall be
available with or without an enameled apron. Bath shall be Kohler Model K-____-____ .
Page 1 of 2
1089498-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
HIGHBRIDGETM
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 43-7/8″ (111.4 cm) x
20-15/16″ (53.2 cm)
Basin area, top 53-3/16″ (135.1 cm) x
23-5/16″ (59.2 cm)
Weight 275 lbs (124.7 kg)
To overflow:
Water depth 12-13/16″ (32.5 cm)
Capacity 49.5 gal (187.4 L)
* Approximate measurements for comparison only.
11-7/8"
(30.2 cm)
30" (76.2 cm)
4-15/16"
(12.5 cm)
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for minimum of 54
lbs/square foot (262 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Will comply with CSA B651 when installed per Clause 4.4.7
of the standard.
Will comply with OBC when installed per Clause 3.8.3.13.
No change in measurements if connected with drain
and fitting/pipe kit illustrated. (K-7214 and K-7261)
1"
(2.5 cm)
6-1/4"
(15.9 cm)
60" (152.4 cm)
HIGHBRIDGETM BATH
Page2of2
1089498-4-
E
3" (7.6 cm)
14-1/4"
(36.2 cm)
15" (38.1 cm)
2-3/4"
(7 cm)
13-7/8"
(35.2 cm)
2" (5.1 cm)
Product Diagram
32"
(81.3 cm)
17"
(43.2 cm)
17-1/2"
(44.5 cm)
1/2"
(1.3 cm)
Front Flange Detail
6-5/16"
(16 cm)
16" (40.6 cm)
5/8"
(1.6 cm)
Rim Flange
Detail
1/2"
(1.3 cm)
1/4"
(6 mm)
16-3/4"
(42.5 cm)
Loading...