Kohler K8760 Specifications

Roughing-In

K-875, K-876

BELLWETHER

BATH WITH APRON

Product Information

Applicable product: Bath with apron – left drain K-875 Bath with apron – right drain K-876 ADA compliant when installed per Section

607 of the Act.

Fixture*: Bathing well: Basin area, bottom 41-1/4″ (104.8 cm) x

18-3/16″ (46.2 cm)

Basin area, top 51-1/4″ (130.2 cm) x

23-5/16″ (59.2 cm)

Weight 298 lbs (135.2 kg) To overﬂow: Water depth 11-5/16″ (28.7 cm) Capacity 44 gal (166.6 L) * Approximate measurements for comparison only.

Required accessories: Clearﬂo cable bath drain, less PVC tubing K-7214 Fitting/pipe kit K-7261

Optional accessories: Stillness Oblo Purist

spout, 35° Purist

spout, 90° Coralais Coralais Margaux

wall-mount bath spout K-952

wall-mount bath spout K-10044

wall-mount non-diverter bath

non-diverter bath spout K-15137

diverter bath spout K-15138

wall-mount bath spout K-16246

K-14426

K-14427

Installation Notes

Install this product according to the installation guide.

Floor support under bath must provide for a minimum of 52 lbs/square foot (252.8 kg/square meter) loading.

Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All dimensions are nominal.

No change in measurements if connected with drain and fitting/pipe kit illustrated. (K-7214 and K-7261)

11-7/8" (30.2 cm)

60" (152.4 cm)

3-15/16" (10 cm)

4-1/4" (10.8 cm)

15-15/16" (40.5 cm)

2-3/4" (7 cm)

14-7/8" (37.8 cm)

2" (5.1 cm)

Spout Detail

7" (17.8 cm)

"X"

32" (81.3 cm)

Finished Wall

"X" Depending on length and angle

Note: To clear the bath rim end wall, a minimum 7" (17.8 cm) bath spout is recommended. Water flow from angled bath spouts less than 7" (17.8 cm) may also provide needed clearance.

Rim Flange Detail

1/4" (6 mm)

5/8" (1.6 cm)

1-1/2" PVC Tee

1/2" (1.3 cm)

1/4" (6 mm)

BELLWETHERTM BATH WITH APRON 1074694-1-