Page 1
K-8752IN
Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences.
Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
All information in these instructions is based upon the latest product information available at the time of publication. Kohler India
reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
These instructions contain important care, cleaning, and warranty information.
K-8752IN
K-8750IN
K-8741T
TM
Observe all local plumbing and building codes. Shut off the water supply. Seat post holes are on 155mm centers. Passageways is
60mm. Water depth from rim is 210mm.
Ensure that the new drain and shut-off valve have the correct roughing-in dimensions. See Fig.#1.
Be very careful while working with vitreous china products. Vitreous china can break or chip if the bolts or nuts are overtightened, or
if carelessly handed. Carefully inspect the new bowl for any sign of damage.
Fixture dimensions are nominal and conform to tolerances established by ASME Standards (A112. 19.2M).
1037407-IN01-B
Page 2
K-8750IN
1037407-IN01-B
358
223
360
270
155
360
55
323
102
Description Inwall Tank
Cover
Ove in-wall tank without iron rack with
optional top & front actuation
Ode on in-wall tank without iron rack
with front actuation
K-6287IN-NA
K-6286-NA
K-6288IN-CP/-SC
K-6283IN-CP/-SC
Page 3
1037407-IN01-B
223
323
3
Page 4
1037407-IN01-B
Page 5
1037407-IN01-B
Page 6
1037407-IN01-B
When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the toilet surface. Use warm water
and a liquid detergent to clean the surface.
Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners containing petroleum distillates to
remain in contact with any toilet surface for long periods of time.
Remove plaster by carefully scrapping with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools. Use a
powder type detergent on a damp cloth to provide mild abrasive action to any residual plaster.
Clean the outside surface of your vitreous china product with mild soap and warm water. Wipe the entire surface completely dry
with a clean, soft cloth.
Most toilet bowl cleaners are not harmful to the vitreous china surface of the toilet bowl. Please follow the bowl cleaner
manufacturer is instructions carefully.
Do not use abrasive cleaners or solvents.
Page 7
1037407-IN01-B
K-8752IN
K-8750IN
K-8741T**
K-8741T**
BOWL
SEAT
NOTE: Seat pictures shown are for reference only.Please refer installation instructions provided with the seat.
TM
Page 8
India: +(91) 124-4319685/6
Toll Free : 1800 103 2244
1037407-IN01-B
-8-
Loading...