Kohler K8359BN User Manual

Features

Brass construction

•

Floor-mount installation

• 14″ (35.6 cm) spout reach

• Available in a 35″ (88.9 cm), 36″ (91.4 cm), or

•

37″ (94 cm) spout height Non-laminar ﬂow

•

Slip-ﬁt connection

•

ADA compliant when ADA compliant handles are

•

installed Includes aerator, hardware kit, and escutcheon

•

Complements so¯k

•

Fountainhead Complements a variety of bath valve trim (refer to

•

Kohler Price Book)

overﬂowing bath and

TM baths

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

ASME A112.18.1/CSA B125.1

•

ADA

•

IAPMO/cUPC

•

Speciﬁed Model

FLOOR-MOUNT BATH FILLER

K-8359

ALSO K-8361, K-8362

Colors/Finishes

CP: Polished Chrome

•

PB: Vibrant®Polished Brass

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

NA: None applicable

•

Model Description Colors/Finishes

K-8359 Floor-mount bath ﬁller – 36″ (91.4 cm) spout height ❑ CP ❑ PB ❑ Other ____ K-8361 Floor-mount bath ﬁller – 35″ (88.9 cm) spout height ❑ CP ❑ PB ❑ Other ____ K-8362 Floor-mount bath ﬁller – 37″ (94 cm) spout height ❑ CP ❑ PB ❑ Other ____

Required Valve

K-300-K 1/2″ high-ﬂow ceramic disc valve system ❑ NA K-301-K 3/4″ high-ﬂow ceramic disc valve system ❑ NA K-411-K Bath ﬁller spout shank ❑ NA

Product Speciﬁcation

The ﬂoor-mount bath ﬁller shall be of brass construction. Bath ﬁller shall feature a 14″ (35.6 cm) spout reach and slip-ﬁt connection. Product shall be available in a 35″ (88.9 cm), 36″ (91.4 cm), or 37″ (94 cm) spout height. Product shall include an aerator, hardware kit, and escutcheon. Product shall be ADA compliant when ADA compliant handles are installed. Product shall

be non-laminar ﬂow. Product shall complement the so¯k overﬂowing bath and Fountainhead baths and complement a variety of

bath valve trim (refer to Kohler Price Book). Bath ﬁller shall be Kohler Model K-____-____ with required valve K-____-K-NA.

Page 1 of 2 1006092-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

Installation Notes

WARNING: Risk of personal injury. Do not use

the bath ﬁller as a grab bar or support bar when entering or exiting the bath. The bath ﬁller is not designed to support weight.

Install this product according to the installation guide.

2-1/2" (6.4 cm) D.

7/16" (1.1 cm) Max Finished Floor Thickness Based on Spout Base and Locknut Adjustment

1-1/4" (3.2 cm)

Finished Floor

1-1/4" (3.2 cm) Min 2-1/4" (5.7 cm) Max

3-3/8" (8.6 cm) D.

2-15/16" (7.5 cm) Min 3-9/16" (9 cm) Max

Subflooring

Reinforcement

K-8359 K-8361 K-8362

14" (3.56 cm)

3/16" (5 mm) Min 1-1/2" (3.8 cm) Max

Finished Wall

2x4 Wall

XZY

20-7/16" (51.9 cm) 25" (63.5 cm)36" (91.4 cm) 16-1/2" (41.9 cm) 24" (61 cm)35" (88.9 cm)

18-1/2" (47 cm) 26" (66 cm)37" (94 cm)

2-1/4" (5.7 cm)

2" (5.1 cm) Min Air Gap

FLOOR-MOUNT BATH FILLER Page2of2

1006092-4-

Product Diagram