Kohler K757900 Specifications

Features
CSA B651
OBC
Vitreous china.
Comfort Height® Elongated bowl.
Dual Flush flushing system.
Includes left-hand polished chrome dual flush trip lever.
Fully skirted trapway.
Patented ReadyLock™ installation system.
12" (305 mm) rough-in.
Seat not included.
4-1/2" (114 mm) x 5-3/4" (146 mm) water area.
28-5/8" (727 mm) x 14-3/16" (360 mm) x 32-1/2" (826 mm).
Floor mount / Floor outlet.
Coordinates with other products in the Persuade collection.
Recommended Accessories
K-5588 Purefresh® Elongated Toilet Seat K-4008 Reveal® Quiet-Close Elongated Toilet Seat K-4636 Cachet® Quiet-Close Elongated Toilet Seat K-9237 Dual-flush Trip Lever
Components
Product includes:
K-4326 Skirted Trapway Bowl K-19042 Toilet Tank Additional included component/s: Tank cover, Left-hand dual flush trip lever, ReadyLock installation system, and Hardware kit.
Persuade® Curv
Comfort Height® Dual Flush Toilet
K-75790
Codes/Standards
ASME A112.19.14 ASME A112.19.2/CSA B45.1 DOE - Energy Policy Act 1992 EPA WaterSense California Energy Commission (CEC) ADA ICC/ANSI A117.1 CSA B651 OBC
®
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 4-2-2018 02:28
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
Ice Grey95
Black Black7
12"
Persuade® Curv
Comfort Height® Dual Flush Toilet
K-75790
Technical Information
All product dimensions are nominal.
Two-piece, Floor-mountToilet type: FloorWaste Outlet: Elongated frontBowl shape: 2" (51 mm)Trap passageway:
Water Consumption
1.6 gpf (6 lpf)Full: 1 gpf (3.8 lpf)Reduced: 4-1/2" x 5-3/4" (114 mm x 146 mm)Water surface size: 8-1/2" (216 mm)Rim to water surface: 12" (305 mm)Rough-in: 5-1/2" (140 mm)Seat-mounting holes:
Notes
Install this product according to the installation instructions.
IMPORTANT! The rough-in must be 12" (305 mm) or more from the base of the wall or baseboard. Install or relocate the supply and outlet as necessary to conform to rough-in dimensions.
If this toilet is installed in new construction, install a new supply stop following the dimensions in the diagram.
In installations with the supply stop installed, the existing supply stop may need to be relocated if it is less than 8-1/2" (216 mm) from the centerline of the toilet. Dry fit the toilet to confirm if the supply stop needs to be relocated.
The supplied hose will extend roughly 6" (152 mm) from the toilet. If the supplied hose does not reach the supply stop, a longer supply hose may be used.
For back-to-back toilet installations: Use only a 45° double wye fitting.
USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 4-2-2018 02:28
Loading...