Reset Function – User Settings.................................................... 105
Reset Function – System......................................................... 106
Start-up After System Reset....................................................... 107
Music Server Set-up – Getting Started............................................... 108
Compatible Music Servers........................................................ 108
Enable Music Sharing........................................................... 109
Adding Internet Stations.......................................................... 110
Kohler Co.31079815-5-A
Screen
User 123 Icon
Power Icon
OK Icon
Dial
User 123 Icon
Dial
Portrait
Interface Anatomy
Turn On Your Interface
Path: [Power Icon]
Power Icon
User 456 Icon
Back Icon
OK Icon
Screen
User 456 Icon
Landscape
Back Icon
After a period of inactivity, your interface will enter sleep mode. When in sleep mode, the power icon will be
lit by a pulsing green light. If this is not the case, verify the interface(s) and power cables are plugged into
the valve media module and the power supply cord is plugged into the outlet.
Press the [Power Icon] to turn the interface on.
Navigating Through the Menus
Scrolling through the menu items: Use the dial to scroll through and highlight the various menu items.
Selecting the highlighted menu item: Press the [OK Icon] to select the highlighted menu item.
Example path: [Icon] > menu item 1 > menu item 2
The above example path directs you to press the [Icon], then indicates that you would scroll to and then
select “menu item 1” by pressing the [OK Icon], and then scroll to and select “menu item 2.”
1079815-5-A4Kohler Co.
Portrait InterfaceLandscape Interface
Operating without the Dial Ring
If your dial ring is lost or misplaced, you can still use your interface by activating the alternate scroll mode.
NOTE: When the alternate scroll is activated, the user presets will not be available.
When on the main ″Shower″ or ″Settings″ screen, the alternate scroll mode can be activated by pressing and
holding the [Back Icon] for 8 seconds.
For Portrait Interfaces: Once activated, the [123 User Icon] will allow you to scroll down and the [456 User
Icon] will allow you to scroll up. Press the [OK Icon] to select the highlighted option.
For Landscape Interfaces: Once activated, the [123 User Icon] will allow you to scroll up and the [456 User
Icon] will allow you to scroll down. Press the [OK Icon] to select the highlighted option.
To deactivate the alternate scroll mode, press and hold the [Back Icon] for 8 seconds or replace and
turn the dial ring.
Kohler Co.51079815-5-A
Using Your Shower
IMPORTANT! The interface must be set up according to your chosen valve configurations before
proceeding. If the configuration has not yet been selected in your interface, refer to the ″Set the Valve
Configuration - Preset Options″ or ″Set the Valve Configuration - Custom Options″ section.
To begin using your shower, use the dial to scroll to the shower screen.
Press the [OK Icon] to select and turn on your shower.
If your user presets are already set, refer to the “Using User Presets” section.
At any time, the shower can be turned OFF by pressing the [Power Icon].
The water will turn on and you will see a temperature screen displaying the current temperature and the set
temperature.
If you have the auto purge function activated: All the water outlets (with the exception of any
handshowers) will turn on and remain on until the set temperature is reached. (See the “Auto Purge” section
for instructions to turn this feature ON or OFF.)
Once the set temperature is reached all outlets except the designated primary showerhead will turn off. (See
the “Select Primary Water Outlet” section for more information on selecting or changing your primary water
outlet.)
If the auto purge function is not activated: The primary water outlet, usually a single showerhead, will turn
on. (See the “Select Primary Water Outlet” section for more information on selecting or changing your
primary water outlet.)
Use the dial to adjust the temperature up or down as desired.
In addition to the primary showerhead, you can also turn individual water outlets ON or OFF. Refer to the
“Turn Water Outlets ON or OFF” section.
The shower mode options consist of:
•
All On – turns all water outlets ON or OFF
•
List of Water Outlets – turns specific water outlets ON or OFF
•
Massage – selects massage cycling pattern
•
°F Therapy – selects hot and cold therapy options
•
Lights – turns incandescent and/or chroma lights ON or OFF also allows adjustment of color
(chroma only) and brightness (This menu item is only visible if this component is connected.) Refer
to the “Using Lights” section.
•
Music – allows for the selection of music from a music server, internet radio, or other audio device
connected via the “Line In” jack. Refer to the “Using Music” section.
1079815-5-A6Kohler Co.
Using Your Shower (cont.)
•
Steam – turns the steam ON or OFF and allows temperature adjustment of steam (This menu item
is only visible if this component is connected.) Refer to the “Using Steam” section.
•
Save As – saves current settings to a user preset
•
Main Menu – returns to the main menu screens and turns OFF your shower
From the main menu, use the dial to scroll to the ″Shower″ screen.
Press the [OK Icon] to enter the shower menu.
Kohler Co.71079815-5-A
Turn Water Outlets ON or OFF
Turn ON All Outlets
Path: Shower > Temperature > [Back Icon] Options
NOTE: By default, when the shower is first turned ON, after the set temperature is reached, only the
primary showerhead will remain on. Using this screen, you can select “All On”ï to have all water outlets
ON.
From the temperature screen press the [Back Icon].
Highlight “All On.”
Press the [OK Icon] to select; this will turn ON all the water outlets.
Press the [Back Icon] to return to the temperature screen.
Turn ON/OFF Specific Water Outlets
Path: Shower > Temperature > [Back Icon] Options > Outlets
NOTE: The list of water outlets available will vary depending on your specific shower set-up.
NOTE: By default, when the shower is first turned ON, after the set temperature is reached, only the
primary showerhead will remain on. Using this screen, you can select individual water outlets to turn ON
or OFF.
From the temperature screen press the [Back Icon].
Using the dial, scroll to “Outlets.”
Press the [OK Icon] to select. This menu will contain the water outlets available for your chosen
configuration.
NOTE: Available water outlets listed will vary dependent on your chosen configuration.
Scroll to a water outlet such as “Showerhead.”
Press the [OK Icon] to turn the outlet ON or OFF. All checked items will be ON.
Once you have made your selections, press the [Back Icon] twice to return to the temperature
screen.
1079815-5-A8Kohler Co.
Massage Not Activated
Massage Active
Choose Massage Function
Path: Shower > Temperature > [Back Icon] Options > Massage
Refer to the "Activate the Massage
Functions" section.
This function, when activated, causes the water outlets to cycle ON and OFF in the chosen massage pattern.
NOTE: If the [No Icon] is present following “Massage” instead of an arrow, the massage function is not
yet activated. Refer to the “Activate the Massage Function” in the setting section in this guide to turn on
this function.
NOTE: The available massage cycling options vary dependent on your chosen configuration. For more
information about the available cycling patterns, refer to the section for your particular configuration in
the “Configurations” section of this guide.
To turn ON the massage function, from the temperature screen press the [Back Icon].
Using the dial, scroll to “Massage.”
Press the [OK Icon] to select
Using the dial, scroll to and highlight your desired massage.
Press the [OK Icon] to select and begin massage.
Press the [Back Icon] twice to return to the temperature screen.
Once a massage mode is selected, the body sprays/watertiles will automatically turn on and the water
outlets will begin to cycle ON and OFF in your chosen massage pattern.
Kohler Co.91079815-5-A
Adjust Cycling Speed
Path: Shower > Temperature > [Back Icon] Options > Massage > Speed > Slow or Fast
Use this function to vary the speed the water outlets cycle during massage.
To adjust the massage cycling speed, from the temperature screen press the [Back Icon].
Using the dial, scroll to “Massage.”
Press the [OK Icon] to select.
Scroll to the bottom of the menu.
Use the dial to scroll to and highlight either “Slow” or “Fast.”
Press the [OK Icon] to set the cycling speed. Your selection will be “checked.”
Press the [Back Icon] twice to return to the temperature screen.
1079815-5-A10Kohler Co.
Temperature Therapy Not Activated
Temperature Therapy Active
Refer to the "Activate
Temperature Therapy"
section.
NOTE: If the [No Icon] is present following “°F Therapy” instead of an arrow, the temperature therapy
function is not yet activated. Refer to the “Activate Temperature Therapy” section to turn on this
function.
This function, when activated, causes the water temperature to cycle from hot to cold to hot or cold to hot to
cold dependent on your chosen therapy.
NOTE: Temperatures can be customized as desired. For the explanation of the therapies, the default
temperatures will be used.
Hot Therapy will start with a water temperature of 101°F (38°C) for 90 seconds, decrease to 96°F (36°C) for
45 seconds, decrease again to 86°F (30°C) for 30 seconds, then step the temperature back up to 96°F (36°C)
for 45 seconds before going back to 101°F (38°C). The water temperature will continue to cycle until this
function is turned OFF.
Cold Therapy will start with a water temperature of 86°F (30°C) for 30 seconds, increase to 96°F (36°C) for
45 seconds, increase again to 101°F (38°C) for 90 seconds, then step the temperature back down to 96°F
(36°C) for 45 seconds before going back to 86°F (30°C). The water temperature will continue to cycle until
this function is turned OFF.
To turn ON the temperature therapy function, from the temperature screen press the [Back Icon].
Using the dial, scroll to “°F Therapy.”
Press the [OK Icon] to select.
Using the dial, scroll to either “Begin Hot” for heat therapy, or “Begin Cold” for cold therapy.
Press the [OK Icon] to select and begin your selected temperature therapy.
Kohler Co.111079815-5-A
Temperature Therapy Options (cont.)
The water temperature will continue to cycle until this function is turned OFF.
To customize the temperatures, refer to the “Changing Temperature Therapy Temperatures” section.
1079815-5-A12Kohler Co.
Temperature Therapy Not Activated
Temperature Therapy Active
Refer to the "Activate
Temperature Therapy"
section.
NOTE: If the [No Icon] is present following ″°F Therapy″ instead of an arrow, the massage function is not
yet activated. Refer to the ″Activate Temperature Therapy″ section to turn ON this function.
This function, when activated, causes the water temperature to cycle from hot to cold to hot or cold to hot to
cold dependent on your chosen therapy. High, mid, and low temperatures can be customized.
To customize the temperature therapy temperatures, you must first activate a hot or cold therapy.
To turn ON the temperature therapy function, from the temperature screen press the [Back Icon].
Using the dial, scroll to “°F Therapy.”
Press the [OK Icon] to select.
Using the dial, scroll to either “Begin Hot” for heat therapy, or “Begin Cold” for cold therapy.
Press the [OK Icon] to select and begin your selected temperature therapy.
You will see a temperature screen with the various temperature jumps along the bottom. The beginning
therapy temperature will be highlighted in the bottom left of the screen.
Use the dial to adjust the temperature as desired.
Press the [OK Icon] to set this first temperature and advance to the next temperature.
Repeat for each temperature setting.
NOTE: When adjusting the temperatures, the second and fourth temperature settings will always be the
same; if you adjust one temperature the other will automatically update to the new setting.
Kohler Co.131079815-5-A
Using Lights
This function controls both the incandescent lighting in your shower as well as the chroma features of your
lighted rain panel.
NOTE: If you do not have a chroma light panel connected or if you have incandescent lighting disabled
(see “Activate Lights” section) the lighting menu options will not be available.
The light mode options consist of:
•
ON/OFF – turns incandescent or chroma lighting ON or OFF
•
Brightness – adjusts the brightness of your incandescent lighting
•
Color Brightness – adjusts the brightness of your chroma lighting
•
Choose Color – sets the chroma lighting to display the color of your choosing
•
Color Dial – sets the chroma lighting to display a custom color of your choosing
•
Effects – sets in motion the lighting effects of your chroma lighting
•
Save As – saves current settings to a user preset (refer to the “Save As” section)
•
Main Menu – returns to the main menu screens and turns OFF your shower (refer to the “Main
Menu” section)
From the main menu, use the dial to scroll to the “Lights” screen.
Press the [OK Icon] to enter the Lights options menu.
The chroma lighting can be set to display a custom color of your choosing.
From the main menu, use the dial to scroll to the “Lights” screen.
Press the [OK Icon] to select.
Scroll to “Color Dial.”
Press the [OK Icon] to select.
Use the dial to adjust the color up or down by 5° increments.
Once the color is set as desired, press the [Back Icon] to set the custom color under the “Color Dial”
selection in the “Colors” menu and to return to the Light Options screen.
The chroma light comes with multiple lighting effects, such as Sunrise, Sunset, and Water Reflection.
From the main menu, use the dial to scroll to the “Lights” screen.
Press the [OK Icon] to select.
Scroll to “Effects.”
Press the [OK Icon] to select.
Using the dial, scroll to your desired effect.
Press the [OK Icon] to select and begin the chroma lighting effect.
Press the [Back Icon] twice to return to the temperature screen.
Save Lights Settings
Path: Lights > Save As
Refer to the “Save As” section.
1079815-5-A20Kohler Co.
Using Music
IMPORTANT! To stream audio from your home computer to your shower, you must first configure the
music server on your computer. Refer to the ″Music Server Set-up – Getting Started” section for
information on configuring your music server.
IMPORTANT! Music options will not be available unless you have agreed to the Roku terms of agreement
and have also selected your region. If this was not done during the initial set-up, refer to the “Roku
Agreement” section.
A high-speed internet connection is recommended for best performance.
From the music options menu, you can access and play your music files in the “Library” and preconfigured
internet radio stations under “Radio.” Additional audio devices, such as an MP3 player, can be connected via
the Line In jack allowing your interface to control the volume.
The music mode options consist of: (options listed vary dependant on your system set-up)
•
OFF – turns OFF your music
•
Library – links to your configured music servers
•
Radio – links to your configured internet radio stations
•
Line In – allows you to hook up your own audio device to the system
•
Settings – controls the music settings for your system (refer to the “Music Settings” section)
•
Save As – saves current settings to a user preset (refer to the “Save As” section)
•
Main Menu – returns to the main menu screens and turns OFF your shower (refer to the “Main
Menu” section)
From the main menu, use the dial to scroll to the “Music” screen.
Press the [OK Icon] to enter the Music options menu.
This function links to your configured music servers to play your music files.
From the main menu, use the dial to scroll to the “Music” screen.
Press the [OK Icon] to enter the Music menu.
To listen to your music files, scroll to “Library.”
Press the [OK Icon] to select.
Scroll to and select your music server.
Dependant upon your music server, your music will be organized by playlist, artist, album, songs, or genre.
Navigate through the menus to a song list.
Use the dial to scroll to and highlight a song.
Press the [OK Icon] to begin playing the selected song.
In the “Now Playing” screen, your song will be displayed with song, artist, and album (if the information is
available).
When the volume icon is highlighted, use the dial to adjust the volume.
To skip forward or backward in your playlist:
Press and hold the [OK Icon] for 3 seconds to switch the highlight to the skip icon.
Use the dial to skip forward or backward in your playlist.
After 10 seconds the dial will revert back to controlling volume.
1079815-5-A22Kohler Co.
Internet Radio
Path: Music > Radio
Alternate Path: Shower > [Back Icon] Options > Music > Radio
This feature links to and plays your configured Internet radio stations.
Your computer does not need to be on to access the built-in intranet radio stations listed under “Radio.” You
need only to have an active Internet connection to your home network.
To add intranet radio stations to your playlist, refer to the “Adding Internet Stations” section.
To begin playing an Internet radio station:
From the main menu, use the dial to scroll to the “Music” screen.
Press the [OK Icon] to enter the Music menu.
To access an Internet radio station from the music options screen, scroll to “Radio.”
Press the [OK Icon] to select.
Using the dial, scroll through the available stations.
Press the [OK Icon] to begin streaming the radio station. The screen will now display what is “Now
Playing.”
Use the dial to adjust the volume.
Kohler Co.231079815-5-A
Additional Audio Devices
IMPORTANT! For best sound quality, adjust the volume on your connected device to a comfortable
listening volume prior to connecting; allow the volume to be adjusted via the interface, not the audio
device.
This feature allows you to play music from another audio device, such as an MP3 player, plug the device in
via the Line In jack.
From the main menu, use the dial to scroll to the “Music” screen.
Press the [OK Icon] to enter the Music menu.
From the music options screen, scroll to “Line In.”
Press the [OK Icon] to select.
Press play on your audio device. The screen will now display “Line-In.”
Use the dial to adjust the volume.
1079815-5-A24Kohler Co.
Using Steam
Your properly equipped Kohler steam generator can also be controlled via your interface.
Your steam system is set to allow for 600 minutes of usage before a cleaning cycle is required. Refer to the
“Power Clean” section for more information.
The steam mode options consist of:
•
OFF – turns your steam OFF
•
Steam On – turns ON steam
•
Save As – saves current settings to a user preset (refer to the “Save As” section)
•
Main Menu – returns to the main menu screens and turns OFF your shower (refer to the “Main
Menu” section)
From the main menu, use the dial to scroll to the “Steam” screen.
Press the [OK Icon] to enter the Steam options menu.
Kohler Co.251079815-5-A
Steam On
Path: Steam > Steam On
Alternate Path: Shower > Steam > Steam On
From the main menu, use the dial to scroll to the “Steam” screen.
Press the [OK Icon] to enter the Steam options menu.
Using the dial, scroll to and select “Steam On.” This will turn your steam ON and bring you to the
steam status screen.
The temperature in the bottom center of the screen will now be highlighted.
Use the dial to adjust the steam temperature.
Press the [OK Icon] to set the temperature.
Now the timer for the steam is highlighted in the bottom right of the screen.
Using the dial, you can increase the duration for the steam up to 10 additional minutes.
Press the [OK Icon] to set the timer. The temperature will be highlighted again.
NOTE: The maximum allowable setting for the timer is 55 minutes.
If you would like to increase the steam timer, press the [OK Icon] again and repeat until the desired
amount of time is displayed.
Save Steam Settings
Path: Steam > Save As
Refer to the “Save As” section.
Using User Presets
User presets allow you to quickly access your saved personal settings for shower, lighting, music and/or
steam.
User presets can be saved at any time while showering, or set up using the settings menu prior to
showering.
1079815-5-A26Kohler Co.
Using User Presets (cont.)
To access previously set user information, press the [123 User Icon] once for ″User 1,″ twice for
″User 2,″ and three times for ″User 3.″ You would press the [456 User Icon] once for ″User 4,″ twicefor ″User 5,″ and three times for ″User 6.″
An alternate method for accessing user presets: Press the [123 User Icon]or [456 User Icon], scroll
to the desired user and press the [OK Icon] to select.
If you need help customizing your settings, refer to the Shower, Lights, Music, and Steam sections.
For saving user presets, refer to the ″Save As″ section.
Kohler Co.271079815-5-A
Save As
Path: Shower > Temperature > [Back Icon] Options > Save As...
Alternate Paths:
Lights > Save As
Music > Save As
Steam > Save As
User presets save your personal settings for showering, lights, music, and steam.
User presets can be saved at any time.
If you need help customizing your settings, refer to the: “Shower Settings,” “Light Settings,” “Music
Settings,” and “Steam Settings” sections.
Using the dial, scroll to “Save As...” from the shower, lights, music, or steam options screens (see
paths above).
Press the [OK Icon] to select.
Scroll to a user number. The current active user will be denoted by a heart symbol.
Press the [OK Icon] to save your settings to the highlighted user.
Once saved, a confirmation screen will confirm your saved user profile.
1079815-5-A28Kohler Co.
Main Menu
Path: Shower > Temperature > [Back Icon] Options > Main Menu
Alternate Paths:
Lights > Main Menu
Shower > [Back Icon] Options > Lights > Main
Music > Main Menu
Shower > [Back Icon] Options > Music > Main Menu
Steam > Main Menu
Shower > [Back Icon] Options > Steam > Main Menu
Using the dial, scroll to “Main Menu” from the shower, lights, music, or steam options screens (see
paths above).
Press the [OK Icon] to select and return to the main menu and turn OFF your shower. Lights, music,
and steam, will remain ON if currently in use.
Kohler Co.291079815-5-A
Turn OFF Individual Devices
Path: [Power Icon]
Your system can be set to turn OFF all devices and the shower when the [Power Icon] is pressed or allow
you the option of turning OFF individual devices while leaving others, such as the shower, ON.
Activate the Ask Function
To allow the power down of individual devices, refer to the “Power OFF” section and activate the
“Ask” function.
If the “Ask” Function is Activated – Turn OFF Individual Devices:
Press the [Power Icon]. A pop-up screen will appear showing all features that are currently ON.
Scroll through and highlight the item(s) you want to turn OFF.
Press the [OK Icon] to “check” that item.
Once all items you want to turn OFF are “checked,” scroll to “Done.”
Press the [OK Icon] and all selected items will turn OFF.
If the “Ask” Function is Activated – Turn OFF All Devices:
Press the [Power Icon]. A pop-up screen will appear showing all features that are currently ON.
Press the [Power Icon] again to turn OFF all devices.
1079815-5-A30Kohler Co.
Loading...
+ 82 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.