Kohler K-434, K-435, K-436, K-440, K-441 Owners Manual

...

Homeowners Guide

Showering Destination

K-425, K-426, K-430,

K-431, K-499

K-434, K-435, K-436,

K-440, K-441, K-499

M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página“ Español-1”

1000705-5-C

Table of Contents

Thank You For Choosing Kohler Company .............................................. 2

IMPORTANT INSTRUCTIONS ....................................................... 3

Features - Shower Customization ..................................................... 4

Features - Controls, Receptor, and Enclosure ............................................ 5

Operation - Controls and Shower Arms ................................................. 6

Operation - Sidesprays and Handshower ............................................... 7

Care and Cleaning Instructions — Shower Components .................................... 7

Care and Cleaning Instructions — Shower Door .......................................... 7

Care and Cleaning Instructions — Shower Receptor ....................................... 8

Optional Temperature Limiting Adjustment ............................................... 9

Warranty Information .............................................................. 9

Limited One-Year Warranty ......................................................... 10

Lifetime Limited Warranty — For U.S.A. and Canada Only ................................. 10

One-Year Warranty ............................................................... 11

Troubleshooting Procedures ........................................................ 12

Correcting Reduced Water Flow - Showerheads ......................................... 13

Correcting Reduced Water Flow - Sprayheads .......................................... 15

Correcting Reduced Water Flow - Handshower .......................................... 16

Service Parts ................................................................... 17

Thank You For Choosing Kohler Company

Thank you for choosing The Bold Look of Kohler. Kohler craftsmanship offers you a rare combination of proven performance and graceful sophistication that will satisfy you for years to come. The dependability and beauty of your new shower will surpass your highest expectations. We’re proud of our products here at Kohler, and we know you will be too.

Please take a few minutes to study this Homeowners Guide before using your shower. Pay special attention to the Care and Cleaning instructions in this manual.

All information in this manual is based upon the latest product information available at the time of publication. At Kohler, we constantly strive to improve the quality of our products. We reserve the right to make changes in product characteristics, packaging, or availability at any time without notice.

1000705-5-C 2 Kohler Co.

IMPORTANT INSTRUCTIONS

READ AND SAVE FOR THE CONSUMER

WARNING: Risk of scalding or other severe injury.

•

Before completing installation, the installer must set the maximum water temperature setting of this valve to minimize the risks associated with scalding hazards according to ASTM F 444.

•

Do not install a shut-off device on either outlet of this valve. The installation of any such device may create a cross-ﬂow condition at the valve and affect the water temperature.

•

Factors that change the temperature of the water supplied to the valve, such as seasonal water temperature changes, and water heater replacement or servicing, will change the maximum water temperature supplied by the valve and may create a scalding hazard. The pressure-balanced valve will not compensate for changes in the water supply temperature; adjust the maximum water temperature setting of this pressure-balanced valve when such changes occur.

•

Pressure-balanced valves may not provide protection against scalding if there is a failure of other temperature-limiting devices elsewhere in the plumbing system.

WARNING: Risk of product damage. Only silicone based lubricants should be used with these valves. Use of petroleum based lubricants on the valve is harmful to the O-rings, seals, and plastic components. Use of petroleum based lubricants will void the warranty.

The installer is responsible for installing the valve and adjusting the maximum water temperature of this pressure-balanced valve according to instructions.

This valve meets or exceeds ANSI A112.18.1 and ASSE 1016.

If you do not understand any of the installation or temperature adjustment instructions in this document, in the United States please contact our Customer Service Department at 1-800-4-KOHLER. Outside the U.S., please contact your distributor.

IMPORTANT NOTICE TO INSTALLERS! Please ﬁll in the blanks in the adjacent box and on the valve label. Then insert these instructions into the plastic bag included with the valve package, and attach the plastic bag to the valve handle for the homeowner’s reference.

NOTICE TO HOMEOWNERS! This device has been preset by _______________________ of _______________________________ to ensure a safe maximum temperature. Any change in the setting may raise the discharge temperature above the limit considered safe, and lead to scalds.

Date: ______________

Kohler Co. 3 1000705-5-C

Wide-Soft

Wide-Strong

Spray

Slow-Pulse

Soft-Aerated

Telescopic Shower Arms

Sidespray

Pulse

Personal Handshower

Concentrated-Pulse

Wide-Pulse

Features - Shower Customization

Your shower destination combines the industry’s latest cutting-edge technology with our commitment to unsurpassed quality and innovation. With your new shower, you and your family can instantly customize each showering adventure to suit your mood and needs. In essence, you can enjoy a totally different experience every time you step inside.

Telescopic Shower Arms

These two overhead shower arms are designed so you can adjust their height and orientation with little more than a touch. A counterweight system inside the tower keeps the telescopic shower arms in place until you move them.

The telescopic shower arms are matched with Kohler’s 3-way relaxing showerheads to wash your stress away.

•

Use the Wide-Soft spray to relax your mind and body.

•

Enjoy a gentle hydro-massage from the Slow-Pulse spray.

•

Calm yourself in the warmth of the Soft-Aerated spray.

Sidesprays

A total of four sidesprays are height adjustable for your comfort and convenience. Position the sidesprays at any height and setting to individualize your shower experience.

Rotate the grip rings on the sidespray to change the ﬂow to Pulse, Spray, or to turn the sidesprays off.

Personal Handshower

The 3-way invigorating handshower will revive your senses with three deep massaging spray patterns.

•

Enjoy a deep massage to key areas of your body with the Wide-Strong spray.

•

Use the Concentrated-Pulse spray for an all-body hydro-massage.

•

Energize yourself with the exhilarating effects of the Wide-Pulse spray.

1000705-5-C 4 Kohler Co.

Water and Temperature Control

Shower Enclosure

Spray Option Control

Shower Receptor

Features - Controls, Receptor, and Enclosure

Shower Valve — Water and Temperature Control

Your shower uses a pressure balancing valve to turn on the water for temperature adjustment. The valve offers a number of special features, including:

•

Sensitivity to water pressure ﬂuctuations

•

One handle to adjust both temperature and turn the valve on/off

•

Resistance to hard water freeze-up

•

Efficient design to supply the water needs of your shower

You can adjust the high temperature setting if the temperature is either too hot or too cold. Refer to the Optional Temperature Adjustment section to change the maximum allowable temperature.

Spray Options

The Spray Option Control (transfer valve) allows you to choose from six spray combinations to create the showering effect you desire. Use these spray options in coordination with the four sidesprays to further customize your experience.

NOTE: The sidesprays are controlled individually and are not selected by the control dial.

The spray options, as shown in the illustration, include:

•

Both telescopic shower arms

•

The right telescopic shower arm alone

•

The left telescopic shower arm alone

•

The right telescopic shower arm and the personal handshower

•

The left telescopic shower arm and the personal handshower

•

The handshower alone

Shower Receptor

Manufactured with durable, easy-to-clean acrylic, your shower receptor compliments your shower destination perfectly.

Shower Enclosure with Pivot Door

Your shower enclosure completes the look of your showering destination. The shower enclosure is constructed of sturdy aluminum framing and uses quality tempered glass for safety

and durability.

Kohler Co. 5 1000705-5-C

Clockwise Open

Counterclockwise Close

"Off" Position

Shower Valve

Easy-Grip Rings

Transfer Valve

Telescopic Shower Arms

Operation - Controls and Shower Arms

Adjusting Water Flow and Temperature

CAUTION: Risk of product damage. Do not force the handle in any direction. The shower valve shuts off by water pressure.

Rotate the shower valve handle clockwise to turn on the water and set the water temperature. To turn the valve off, gently turn the handle counterclockwise to the ″Off″ position.

Select Spray Options

Rotate the transfer valve handle to select one of the six available shower settings.

Adjusting the Telescopic Shower Arms

Adjust the height of the shower arms by gripping the shower arms and sliding them up or down. The shower arms can also swing from side-to-side.

Rotate the easy-grip rings on the showerhead to change the spray pattern.

1000705-5-C 6 Kohler Co.

Easy-Grip Rings

Pull out, then slide up or down.

Easy-Grip Rings

Sidespray

Personal Handshower

Operation - Sidesprays and Handshower

Adjusting the Sidesprays

Adjust the position of the sidesprays by gently pulling out and sliding them up or down. Rotate the easy-grip rings on the sidespray to change the spray pattern.

Adjusting the Personal Handshower

Rotate the easy-grip rings on the showerhead to change the spray pattern.

Care and Cleaning Instructions — Shower Components

Like anything of lasting quality, Kohler faucets and ﬁttings require a certain amount of periodic care to preserve their lustrous ﬁnish. Clean your new Kohler faucet and ﬁttings with a mild soap, rinse thoroughly with warm water and dry with a clean, soft cloth. The ideal cleaning technique is to always blot dry any water from metal surfaces. Allowing water to evaporate on metal will form water deposits. It is important to use a dabbing action to dry metal, not an abrasive or rubbing action.

Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, or chemicals that can damage the ﬁnish. By taking the time to dry your faucet often, soap and water deposits can be prevented.

If your chrome or Vibrant

Windex

Original, Fantastik®All Purpose, Spic and Span Pine Liquid, or Mr. Clean®Springtime Fresh Scent.

For solid color faucets and ﬁttings, consider using these cleaners: Fantastik Pine Liquid, or Mr. Clean

Failure to comply with these cleaning instructions may void Kohler’s warranty obligations.

color/ﬁnish faucet gets excessively dirty, consider using the following cleaners:

All Purpose, Spic and Span

Springtime Fresh Scent.

Care and Cleaning Instructions — Shower Door

Do not use bristle brushes or abrasive sponges on the surfaces of your shower door. Never use abrasive cleaners. Do not allow cleaners to sit or soak on shower door surfaces. Use a shower squeegee to clean the glass doors after showering. Rinse and wipe the ﬁxtures after cleaning to prevent soap build-up. Products to consider for use when cleaning your glass door panels include: Formula 409

Citrus Scent, Glass Plus

, and Windex®Original.

Kohler Co. 7 1000705-5-C

Glass and Surface

Care and Cleaning Instructions — Shower Receptor

Wipe out after each use with a soft cloth or squeegee.

Use only a mild detergent (such as dishwashing soap). Do not use abrasive cleaners. Avoid detergents, disinfectants, or cleaning products in aerosol cans. If the surface becomes excessively dirty, use a general purpose cleaner such as Gel Gloss®(bath and

shower only), Scrub Free Lemon Fresh, Cinch®, Glass Plus®, or Fantastik®All Purpose.

NOTE: To restore dull or scratched shower surfaces: Apply white automotive polishing compound with a clean rag. Rub scratches and dull areas vigorously. Wipe off residue. Follow with a coat of white automotive paste wax. Do not wax areas where you walk or stand.

Mildew Stain Remover, Formula 409®All Purpose Cleaner, Mr. Clean

1000705-5-C 8 Kohler Co.

Tab

Valve Stem

Setscrew

O-Ring

Collar

Optional Temperature Limiting Adjustment

CAUTION: Risk of personal injury. The water temperature should never be set above 120° F (49° C).

NOTE: Do not remove the O-ring and collar at this time. Removing the O-ring and collar will change the

factory setting for the maximum water temperature.

Remove the shower valve trim.

For minor water temperature adjustments:

Turn the setscrew.

For major water temperature adjustments:

Remove the O-ring and collar from the valve stem. Slowly rotate the valve stem until the water temperature is 120° F (49° C) or less. Reinstall the collar onto the valve stem so the setscrew is against the side of the tab as shown in the

illustration. Reinstall the O-ring to the valve stem. Turn the valve stem counterclockwise to turn the water off.

Verify new temperature setting:

Turn the water on to full hot and recheck the water temperature to verify that the temperature is still acceptable. Make adjustments as needed.

Reinstall the shower valve trim.

Warranty Information

See below to determine which warranty a particular component would be covered under.

One-Year Warranty - For Mexico

•

All components purchased in Mexico.

Limited One-Year Warranty

•

Acrylic Receptor

Kohler Co. 9 1000705-5-C

Warranty Information (cont.)

•

Shower Enclosure

•

Tower Components (Not including: showerheads, valves, and trim.)

Limited Lifetime Warranty

•

Showerheads

•

Transfer Valve

•

Shower Valve

•

Valve Trim

Limited One-Year Warranty

For the U.S.A. and Canada Only

KOHLER®plumbing ﬁxtures, faucets and ﬁttings are warranted to be free of defects in material and workmanship for one year from date of installation.

Kohler Co. will, at its election, repair, replace or make appropriate adjustment where Kohler Co. inspection discloses any such defects occurring in normal usage within one year after installation. Kohler Co. is not responsible for removal or installation costs.

To obtain warranty service, contact Kohler Co. either through your Dealer, Plumbing Contractor, Home Center or E-tailer, or by writing Kohler Co., Attn.: Customer Service Department, 444 Highland Drive, Kohler, WI 53044, USA, or by calling 1-800-4-KOHLER from within the USA, 1-800-964-5590 from within Canada and 001-877-680-1310 from within Mexico.

Implied warranties including that of merchantability and ﬁtness for a particular purpose are expressly limited in duration to the duration of this warranty, Kohler Co. disclaims any liability for special, incidental or consequential damages. Some states/provinces do not allow limitations on how long an

implied warranty lasts, or the exclusion or limitation of special, incidental or consequential damages so these limitations and exclusions may not apply to you. This warranty gives you speciﬁc legal rights. You may also have other rights which vary from state/province to state/province.

This is our exclusive written warranty. Notes:

1. There may be variation in color ﬁdelity between catalog images and actual plumbing ﬁxtures.

2. Kohler Co. reserves the right to make changes in product characteristics, packaging or availability at any time with out notice.

Lifetime Limited Warranty — For U.S.A. and Canada Only

Kohler Co. warrants its faucets manufactured after January 1, 1997, to be leak and drip free during normal residential use for as long as the original consumer purchaser owns his/her home. *If the faucet should leak or drip during normal use, Kohler will, free of charge, mail to the purchaser the cartridge necessary to put the faucet in good working condition.

Kohler also warrants all other aspects of the faucet, except gold ﬁnish, to be free of defects in material and workmanship during normal residential use for as long as the original consumer purchaser owns his/her own home. If a defect is found in normal residential use, Kohler Co. will, at its election, repair, provide a replacement part or product, or make appropriate adjustment. Damage to a product caused by accident, misuse, or abuse is not covered by this warranty. Proof of purchase (original sales receipt) must be provided to Kohler with all warranty claims. Kohler Co. is not responsible for labor charges, installation, or other consequential costs. In no event shall the liability of Kohler exceed the purchase price of the faucet.

If the faucet is used commercially, Kohler warrants the faucet to be free from defects in material and workmanship for one (1) year from the date the product is installed, with all other terms of this warranty applying except duration.

If you believe that you have a warranty claim, contact Kohler Co., either through your Dealer, Plumbing

1000705-5-C 10 Kohler Co.

Lifetime Limited Warranty — For U.S.A. and Canada Only (cont.)

Contractor, Home Center or E-tailer, or by writing: Kohler Co., Attn.: Customer Service Department, 444 Highland Drive, Kohler, WI 53044, USA. Please be sure to provide all pertinent information regarding your claim, including a complete description of the problem, the product, model number, color, ﬁnish, the date the product was purchased and from whom the product was purchased. Also include your original invoice. For other information, or to obtain the name and address of the service and repair facility nearest you, call 1-800-4-KOHLER from within the USA, 1-800-964-5590 from within Canada and 001-877-680-1310 from within Mexico.

The foregoing warranties are in lieu of all other warranties, express or implied, including but not limited to the implied warranties of merchantability and ﬁtness for a particular purpose.

Seller disclaims any liability for special, incidental or consequential damages. Some states/provinces do

not allow limitations of how long an implied warranty lasts or the exclusion or limitation of such damages, so these limitations and exclusions may not apply to you. This warranty gives the consumer speciﬁc legal rights. You may also have other rights that vary from state/province to state/province. This warranty is to the original consumer purchaser only, and excludes product damage due to installation error, product abuse, or product misuse, whether performed by a contractor, service company, or the consumer.

This is our exclusive written warranty.

*Trend the KOHLER Faucets Price Book, drains, Duostrainer

faucets, MasterShowerTM Tower, polished gold ﬁnish, all items within the ″Fixture Related″ section of

sink strainers, soap/lotion dispensers and faucets

used in commercial settings are covered by Kohler’s one-year limited warranty.

One-Year Warranty

For Mexico Only

KOHLER CO. It is recommended that at the time of purchase, you verify that all accessories and components are complete

in this package. This Kohler product is warranted to be free of defects in material and workmanship for one (1) year from the

date of purchase as shown on the invoice or receipt.

1. Kohler Co. will only service its commercialized products through its authorized distributors.

2. To obtain warranty service, please present the invoice and corresponding warranty.

3. Through its authorized distributors, Kohler Co. promises to repair the defective product or provide a new replacement or an equivalent model (in those cases that the model has been discontinued) when the product is beyond repair, without any charge to the consumer.

4. The time of repair will not exceed six (6) weeks commencing on the date the product is received.

5. It is recommended that the consumer save the invoice or receipt as additional protection, as it may substitute the warranty in the case that there is a discrepancy in the validity of the warranty.

EXCEPTIONS AND RESTRICTIONS The Warranty will not be valid in the following cases:

1. When the product is not operated in accordance with the instructions concerning use and operation set forth in the owner’s manual or installation instructions, and when the recommendations and warnings included are not observed.

2. When the product has been modiﬁed or dismantled partially or totally; or has been used in a negligent fashion and as a consequence has suffered damages attributable to the consumer, individual, or hardware not authorized by Kohler Co.

3. This warranty does not cover the damages as a result of disaster such as ﬁre or acts of God, including ﬂooding, earthquake, or electric storms, etc. To obtain a list of distributors in your area where you can exercise your rights under this warranty, please call 001-877-680-1310.

Kohler Co. 11 1000705-5-C

One-Year Warranty (cont.)

KOHLER CO., KOHLER, WI 53044 U.S.A.

IMPORTER:

INTERNACIONAL DE CERÁMICA, S.A. DE C.V. AV. CARLOS PACHECO NO. 7200 CHIHUAHUA, CHIH., MEXICO C.P. 31060 TEL: 52 (14) 29-11-11

Troubleshooting Procedures

This troubleshooting guide is for general aid only. A Kohler Authorized Service Representative or qualiﬁed electrician should correct any electrical problems. For warranty service, contact your dealer or wholesale distributor.

Symptoms Probable Causes Recommended Action

1. No water ﬂow. A. Water supplies are not open. A. Open the hot and cold water

B. Shower valve is not open. B. Turn the valve handle

2. Maximum water temperature is

too hot or too cold.

3. Telescopic shower arm does not raise or lower.

4. Uneven or restricted water spray pattern from a showerhead, sprayhead, or handshower.

5. Water leaks past the shower enclosure.

6. Sidesprays do not slide up and down easily.

7. System runs out of hot water too soon.

8. Poor water ﬂow from all showerheads.

A. Maximum water temperature is

not adjusted properly.

A. Counterweight system does not

work.

A. Dirt or mineral build-up in the

showerhead.

A. Worn or damaged shower

enclosure seals.

A. Sidesprays are not being

moved properly.

B. Rollers are dirty or worn. B. Clean, repair, or replace the

A. Hot water source is not

sufficient.

A. Water supply pressure is too

low.

B. Water supply lines are too

small.

C. Water softener is restricting the

water ﬂow.

supplies.

clockwise to open the valve.

A. Adjust the maximum water

temperature. Refer to the Optional Temperature Limiting Adjustment section.

A. Repair or replace the

counterweight system. Contact the installer/dealer.

A. See sections on Correcting

Reduced Water Flow.

A. Replace the shower enclosure

seals. Contact the installer/dealer.

A. Carefully pull the sidespray

out then slide up or down to the desired position.

sidespray assembly. Contact the installer/dealer.

A. Calculate the amount of hot

water needed for showering and install a water heater of adequate size to accommodate your showering needs.

A. This product requires a

running water pressure of at least 45 psi. If necessary, install a booster pump.

B. Install the required 3/4″

dedicated water supply lines.

C. Install a water softener

designed for high water ﬂow installations.

1000705-5-C 12 Kohler Co.

Notches

Aerator

Aerator Housing

Hose

Screen Washer

Collar

Gasket

Aerator Plate

Clean the Aerator

Showerhead Tool

Shower Arm

Socket

Ball

Showerhead

Clean the Screen Washer

Correcting Reduced Water Flow - Showerheads

If your showerheads begin to show reduced ﬂow or performance, follow these steps. If performance does not improve, contact your local service representative.

Clean the Showerhead Spray Holes

With the water running, ﬁrmly rub the holes in the face of the showerhead to dislodge any mineral build-up or debris. If this improves performance, discontinue servicing. If this does not improve performance, continue to Clean the Aerator.

Clean the Aerator

Turn off the water to the showerhead off. Insert the showerhead tool (provided) into the holes in the face of the showerhead. Turn the tool counterclockwise to loosen the aerator housing. Carefully remove the aerator housing, aerator, gasket, and the aerator plate. Clean both sides of the aerator. Reinstall the aerator into the aerator plate. Align the notches in the aerator plate with the raised ″keys″ of the aerator housing. Insert the aerator plate into the aerator housing. Reinstall the rubber gasket into the aerator housing. Carefully thread the aerator housing into the showerhead with the showerhead tool.

Clean the Showerhead Screen Washer

Using an adjustable wrench, carefully remove the collar and showerhead from the shower arm.

Kohler Co. 13 1000705-5-C

Correcting Reduced Water Flow - Showerheads (cont.)

Firmly grasp the hose and turn the socket counterclockwise to loosen from the hose. Remove the socket and screen washer from the hose.

NOTE: Do not attempt to remove the ﬂow control.

Clean the screen washer. Reinstall the screen washer, tapered end ﬁrst, into the hose. Securely hand tighten the socket to the hose. Fit the collar over the ball. Snap the ball into the socket. Push the hose all the way into the shower arm. Thread the collar to the shower arm. Carefully wrench tighten.

1000705-5-C 14 Kohler Co.

Screen

Sidespray

Supply Tube

Setscrew

Correcting Reduced Water Flow - Sprayheads

If your sprayheads begin to show reduced ﬂow or performance, follow these steps. If performance does not improve, contact your local service representative.

Clean the Sprayhead Holes

With the water running, ﬁrmly rub the holes in the face of the sidespray to dislodge any mineral build-up or debris. If this improves performance, discontinue servicing. If this does not improve performance, continue to Clean/Replace the Screen.

Clean/Replace the Screen

Turn off the water. Loosen the setscrew with a hex wrench. Carefully remove the sidespray from the supply tube. Remove the screen from inside the supply tube. Clean or replace the screen as needed. Insert the screen into the supply tube as shown. Slide the sidespray over the supply tube. Tighten the setscrew to secure the sidespray to the supply tube.

Kohler Co. 15 1000705-5-C

Gasket

Showerhead Tool

Clean Handshower Components

Rotor Plate

Rotor

Pulsator Housing

Screen Washer

Shower Inlet

Correcting Reduced Water Flow - Handshower

If your handshower begin to show reduced ﬂow or performance, follow these steps. If performance does not improve, contact your local service representative.

Clean the Handshower Spray Holes

With the water running, ﬁrmly rub the holes in the face of the handshower to dislodge any mineral build-up or debris. If this improves performance, discontinue servicing. If this does not improve performance, continue to Clean the Handshower Components.

Clean the Handshower Components

Turn off the water. Insert the showerhead tool (provided) into the holes in the face of the handshower. Turn the tool counterclockwise to loosen the pulsator housing. Carefully remove the pulsator housing, rotor, rotor plate, and gasket. Inspect the components for debris or mineral build-up. Clean or replace the parts as needed. Install the rotor, ﬂat deﬂector plate ﬁrst, to the pin in the pulsator housing. Install the rotor plate to the pulsator housing with the ﬂat smooth side facing out. Reinstall the gasket into the pulsator housing. Carefully thread the pulsator housing into the handshower with the showerhead tool. If this improves performance, discontinue servicing. If this does not improve performance, continue

to Clean the Screen Washer.

Clean the Screen Washer

Using an adjustable wrench, remove the handshower from the hose. Use a thin-bladed screwdriver to carefully remove the screen washer.

NOTE: Do not attempt to remove the ﬂow control.

Clean and reinstall the screen washer.

1000705-5-C 16 Kohler Co.

85695**

1018271

Ball Socket

77420

42084

O-Ring

1001908

Main Shower Hose

Screen Washer

Collar

56034

O-Ring

1001123** 1001124**

Lamp Post

1008715** 1008714**

Lamp Post/Guide Tube

(Right) (Left)

1011618

Pulley Kit

1001908

Main Shower Hose

97634

Bolt

1005284

Pulley

85690

Upper Cable

86416

Lower Cable

1011619

Stop Kit

1002526

Bolt

89654

Washer

**Finish/color code must be specified when ordering.

Service Parts

Kohler Co. 17 1000705-5-C

1000503**

Front Tower

1001722

Lock Ring

1000956**

Graphic Ring

1000957**

Graphic Ring

1006034

Elbow Adapter

1001712

Nipple

81751

Screw

1006180**

Elbow

42618**

Vacuum Breaker

87130**

Panel Rail

1007732

Glass Panel

86430

Cap Screw

1000174

Glass Panel Adapter

732200

Gasket

97145

Screw

89801

Bracket

86423

Tower Deck

97811

Upper Bushing

1002863

Screw

88079**

Spray Holder

1006035

Adapter Plate

58461**

Handheld Hose

79003

Gasket

34353

O-Ring

1004689**

Towel Bar and Shelf

86424

Shelf

1002862

Screw

52096

Screw

1004991**

Towel Bar

59588

Screw

1005252**

Towel Bar Cap

93841

Screw

**Finish/color code must be specified when ordering.

1000705-5-C 18 Kohler Co.

89293

Valve Bracket

50143-A

Screw

1011614** (Bottom, LH) 1011615** (Bottom, RH) 1011616** (Top, LH) 1011617** (Top, RH)

Body Spray Cart

1011623

Hose

42045

O-Ring

42045

O-Ring

1048881

Screen (4 ea.)

74912

Tube Clamp

1004277

Hose

See kits at right.

97146

Screw

42043

O-Ring

1000227

Tee

These are also available in kits at right.

85500

Cover

58946

Screw

60433

O-Ring

75244

Diverter

1006826

Flange

21980

Screw

1006436

Screw

75740

Collar

33993

O-Ring

See body spray detail.

79703

PBU Body

1000198

Tower Plumbing

79704

Seal Kit

1004278

Hose

**Finish/color code must be specified when ordering.

Kohler Co. 19 1000705-5-C

1001717**

Handspray

79671

Spring

79674

Ball Bearing

86706

Screen Washer

79669

Inlet Seal

79682**

Grip Ring

79682**

Grip Ring

85611

O-Ring

87613

Tool

79670

Post

85929

Gasket

85931

Rotor

1003708**

Showerhead

79670

Post

79671

Spring

85611

O-Ring

85929

Gasket

85674

Plate

85932

Housing

79669

Inlet Seal

79682**

Grip Ring

79674

Ball Bearing

79682**

Grip Ring

85590

Plate

85587

Housing

85928

Screen

**Finish/color code must be specified when ordering.

1000705-5-C 20 Kohler Co.

86101**

Body Spray

86091

Seal

86097

O-Ring

86623**

Collar

86096

O-Ring

86090

Diverter

86086

Setscrew

86098**

Grip Ring

86092

Faceplate

86087**

Shell

86079

Seal

86098**

Grip Ring

86070

Inlet

1001713

Tool Kit

87615

Body Spray Tool

87614

Showerhead Tool

1001677

Hex Key

48694

O-Ring

1004439**

Sleeve

48694

O-Ring

1002304

Stem Extension

85720**

Knob

85720**

Knob

41110**

Screw

73456**

Sleeve

57597

48694

O-Ring

67193

Lock Washer

78562**

Grip Ring

57597

48694

O-Ring

31491

Screw with Lockwasher

78562**

Grip Ring

75771**

Cap

78562**

Grip Ring

78562**

Grip Ring

75771**

Cap

**Finish/color code must be specified when ordering.

Kohler Co. 21 1000705-5-C

1001716

Mounting Kit

52076

Nut

1000117

Anchor Bolt

1002957

Lag Screw

1000119

Anchor Plate

**Finish/color code must be specified when ordering.

1000705-5-C 22 Kohler Co.

1006197**

Top Plate

[72" (182.9 cm) Door]

61336

Machine Screw

61053

Washer

310107

Self-Tapping Screw

1000432

Upper T ra vel Stop

1006196** 1006196** 1006196**

Top Plate

61336

Machine Screw

[44" (111.8 cm) Door] [50" (127 cm) Door] [60" (152.4 cm) Door]

310107

Self-Tapping Screw

89228**

[60" (152.4 cm) Door]

89259**

(All Other Doors)

Wall Channel

456334

Screw

1010885

Screw

61053

Washer

1000432

Upper T ra vel Stop

1002863

Screw

100926-1** 100926-2** 100926-3** 100926-4**

Return Panel

[44" (111.8 cm) Door] [50" (127 cm) Door] [72" (182.9 cm) Door] [60" (152.4 cm) Door]

1009880

Screw

[60" (152.4 cm) Panel Only]

89229** [72" (182.9 cm) Panel Only] 89201**

Panel Adapter

[60" (152.4 cm) Panel Only]

**Finish/color code must be specified when ordering.

89229** [72" (182.9 cm) Panel Only]

Panel Adapter

Finish/Color Code Guide

SS = Satin Silver SL = Satin Nickel SB = Satin Brass

Kohler Co. 23 1000705-5-C

+ 53 hidden pages