Kohler K-1491T, K-1676T, K-18922T, K-18401T Installation Instructions Manual

1036303-T01-A

K-

INSTALLATION INSTRUCTIONS

1491T/K-1676T/K-18922T/K-18401T

PILLOW

BEFORE YOU BEGINBEFORE YOU BEGIN

-1-

·

·

·

·

·

·

Please read these instructions carefully to
familiarize yourself with the required tools, materials,
and installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
All information is based on the latest product
information available at the time of publication.
Kohler China Ltd. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning,
and warranty information-please leave these

instructions for the consumer.

INSTALLATION

·

·

·

·

·

·

Clean the bath surface to remove any soap film or
oils.
Two or three suction cups are located on the back of
the pillow. Place the pillow on a appropriate position
rear to the rear rim of the bath, in order to make
figure of the pillow fit to the surface of the bath, and
press firmly with the heel of your hand at the suction
cup locations.
Check to make sure that the pillow is attached firmly
to the bath.

For best attachment to the bath surface,
moisten the back surface of the pillow at the suction
cup locations. Detach the pillow by lifting it off the bath
surface.

Do not

submerge the pillow, or use it as a seat cushion.

NOTE:

CAUTION: Risk of product damage.

1056326-T01-C

Suction Cup

K-1491T

KOHLER

K-18401T K-1676T

KOHLER

K-18922T

, 2008ã

Copyright Kohler China Ltd., 2008ã

368 201419

Your new vinyl pillow can be routinely cleaned with mild
soap and water. Remove stubborn stains with cleaning
products recommended for vinyl.

Periodically use a vinyl treatment product to rejuvenate
the appearance of the vinyl skin.

CARE AND CLEANING OF YOUR PILLOW

1056326-T01-B

-2-