Kohler K-1188-C1, K-1188-RE, K-1188-ZY, K-1189-C1, K-1189-RE Homeowner's Manual

Homeowners Guide

Overflowing Bath

K-1188-C1, K-1188-RE, K-1188-ZY,

K-1189-C1, K-1189-RE, K-1189-ZW

Write model number here:
Écouter le numéro du modèle ici:
Escribir el número del modelo aquí: ___________________
M product numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de M corresponden a México
(e.j. K-12345M)
Français, page ″Français-1″
Español, pagina ″Español-1″

1019731-5-D

Important Safety Information

INSTRUCTIONS PERTAINING TO A RISK OF FIRE,

ELECTRICAL SHOCK, OR INJURY TO PERSONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: When using this unit, always follow basic precautions, including the following:

DANGER: Risk of personal injury. To reduce the risk of injury, do not permit children to use this

unit unless they are closely supervised at all times.

WARNING: Risk of personal injury. To avoid injury, exercise care when entering or exiting the
whirlpool.

WARNING: Risk of electric shock. Do not permit electric appliances (such as a hair dryer, lamp,
telephone, radio, or television) within 5’ (1.5 m) of this whirlpool.

WARNING: Risk of hyperthermia. People using medications and/or having an adverse medical
history should consult a physician before using a whirlpool equipped with a heater.

WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal
hyperthermia. Prolonged immersions in hot water may induce hyperthermia. Hyperthermia occurs

when the internal temperature of the body reaches a level several degrees above the normal body
temperature of 98°F (37°C). The effects of hyperthermia include: (a) failure to perceive heat, (b)
failure to recognize the need to exit the bath, (c) unawareness of impending hazard, (d) fetal
damage in pregnant women, (e) physical inability to exit the bath, and (f) unconsciousness resulting
in the danger of drowning.

Use this unit only for its intended use as described in this manual. Do not use attachments not
recommended by Kohler Company.

Do not operate this unit without the guard (cover) on the suction fitting.
Never drop or insert any object into any opening. Keep small objects such as bath toys and bathing

accessories out of the unit while it is running.
IMPORTANT! Flush your recirculation system twice a month or more depending upon usage, as described

in the ″Flush System″ section.
Repeated use of personal care products containing oils can damage the unit’s plastic components. Do not use

heavy, vegetable-based shampoos or bath oils.
The unit must be connected only to a supply circuit that is protected by a Ground-Fault Circuit-Interrupter

(GFCI) or Residual Current Device (RCD). Such a GFCI or RCD should be provided by the installer and
should be tested on a routine basis.

To test the GFCI or RCD, push the test button. The GFCI or RCD should interrupt power. Push the reset
button. Power should be restored.

If the GFCI or RCD fails to operate in this manner, there is a ground current flowing, indicating the
possibility of an electric shock. Do not use this unit. Disconnect the unit and have the problem corrected by a
qualified service representative before using.

The water action of this product will cause bath soap or shampoo to foam. Bubble bath is not recommended
for this reason. Refrain from using these products excessively.

Exercise extreme caution if you walk or move around in the bathing well. Plastic surfaces are inherently
slippery when wet.

Do not allow the water temperature in the unit to exceed 104°F (40°C) or the heater will not operate.

1019731-5-D 2 Kohler Co.

Important Safety Information (cont.)

Your new bathing product has been listed by Underwriter’s Laboratories, thus ensuring safety for you and
your family. Your new fixture also conforms to rigid ANSI and IAPMO standards set within the plumbing
industry.

Thank You For Choosing Kohler Company

Thank you for choosing Kohler Company. Your Kohler Company product reflects the true passion for design,
craftsmanship, artistry, and innovation Kohler Company stands for. We are confident its dependability and
beauty will surpass your highest expectations, satisfying you for years to come.

All information in this guide is based upon the latest product information available at the time of
publication. At Kohler Company, we strive to fulfill our mission of improving the level of gracious living for
each person who is touched by our products and services. We reserve the right to make changes in product
characteristics, packaging, or availability at any time without notice.

Please take a few minutes to review this guide. Pay special attention to the care and cleaning instructions.

Remote Control Compliance

FCC ID: N82-KOHLER001 – Compliance Statement (Part 15.19)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired
operation.

Warning (Part 15.21)

Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

FCC Interference Statement (Part 15.105 (b))

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Warning

This portable transmitter with its antenna complies with FCC’s RF exposure limits for general
population/uncontrolled exposure.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

CANADA IC: 4554A-KOHLER001

Industry Canada Statement per Section 4.0 of RSP-100

The term ″IC:″ before the certification/registration number only signifies that the Industry Canada technical
specifications were met.

Kohler Co. 3 1019731-5-D

Remote Control Compliance (cont.)

Section 7.1.5 of RSS-GEN

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation of the
device.

Section 2.6 of RSS-102

This portable transmitter with its antenna complies with Industry Canada RF Exposure Limits for General
Population/Uncontrolled Exposure.

1019731-5-D 4 Kohler Co.

March

20, 2003

EC DECLARATION OF CONFORMITY

444 Kohler Co. Highland Drive

Kohler, WI 53044

USA

declares under our sole reponsibility that our HomeSpa Remote, models1 1703, 1705, 1706,
& 1013822 to which this declaration relates, are in conformity with the following standards:

ETSI EN 300 220-3: 2001
per the provisions of the R&TTE Directive 1999/5/EC

ETSI EN 301 489-3: 2002
CISPR 14: 2001 Radiated Emissions-House hold Appliances
IEC 61000-4-2: 2001 Electrostatic Discharge
IEC 61000-4-3: 2002 Radiated RF Immunity
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC of 3 May

1989 as Amended by 92/31/EEC of 28 April 1992 and 93/68/EEC, Article 5 of 22 July 1993.

The undersigned hereby declares
that the equipment specified above
conforms to the listed Directives and
standards

Timothy Stessman
Senior Project Analyst
Kohler Co
444 Highland Drive
Kohler, WI 53044
USA

Phone: [phone]
Fax: [phone]

Note 1: Model number may be followed by suffixes and may have Kallista® name

Radio Matters for Short Range Devices 25MHz to 1,000MHz

EMC for Short Range Devices 9kHz to 40GHz

Authorized representative
within the Community:

Mr. Christophe Grzesiek
Kohler France
Z.l des Ecrevolles B.P. 39
10901 Troyes Cedex 9
FRANCE

Phone: [phone]
Fax: [phone]

Declaration Statement

Kohler Co. 5 1019731-5-D

Overflow
Channel Drain

Overflow
Channel
Sensors

Water

Pump Control
Switch

Your Overflowing Bath

Your Kohler overflowing bath represents a renaissance in hydrotherapy pleasure unlike anything you have
experienced before. The overflowing bath will transform your bathroom or home spa into a place of
tranquility, rejuvenation, and gracious living you will enjoy for years to come. The overflowing bath will
elevate the spirit-enhancing ambiance of total body immersion, cascading water, and gentle water movement
into your bathroom or home spa. The warm, soothing flow of water and the gentle effervescent bubble action
combine with the enrapturing walls of cascading water to create a relaxing retreat from the cares and worries
of your day.

If you are like most people who install a Kohler overflowing bath, you cannot wait to get in and try it out.
You will soon find that the features and controls are very simple to use, offering a safe and totally relaxing
personal care experience. Please spend a few minutes reading these operating instructions, then you will be
ready to go.

Overflowing Bath Operation

Remove all loose bathing items (such as soap bars, shampoo bottles, and washcloths) from inside
the unit.

NOTE: Do not use excessive amounts of shampoo or soap while you are operating the overflowing bath.
Of course, you can freely use shampoo and soap for showering before you fill the unit.

Make sure the metal suction screen is clean and placed correctly over the plastic suction cover.
Close the drain.

NOTE: The water temperature in the bath should not exceed 104°F (40°C). The in-line heater will
automatically turn off as the water temperature approaches 104°F (40°C) and will remain off until the
water cools.

NOTE: The in-line heater will help maintain the water temperature while your overflowing bath is
running. Always fill the unit with water tempered to your desired comfort level.

Fill the unit with water to a level where the overflow channel sensors are completely covered and
the water in the bathing well runs into the overflow channel drain.

Within 1/2 minute after the overflow channel sensors are submerged, the green light on the pump
control switch will automatically start to blink. This indicates the pump/motor is ready to begin
operation.

Fill the unit 4″ (10.2 cm) to 6″ (15.2 cm) above the bathing well rim.

NOTE: Like any other bath, prevent flooding the area around the unit by entering the filled bathing well
slowly. This will allow the system to properly drain excess water.

1019731-5-D 6 Kohler Co.

Your Overflowing Bath (cont.)

NOTE: Exercise caution if you walk or move around in the bathing well. Plastic surfaces are inherently
slippery when wet.

Slowly enter the bathing well, then press the pump control switch to start the pump/motor and
begin operation.

As the pump/motor turns on and water begins to circulate, the green light on the pump control
switch will change to solid green and will stay on as long as the overflowing bath is running.

Press the pump control switch again to turn off the overflowing bath. The green light in the pump
control switch will automatically start to blink until the overflowing bath is drained below the
overflow channel sensors, or is restarted.

After approximately 20 minutes of continuous operation, a built-in timer will automatically stop the
pump/motor.

Chromatherapy Light Operation

If the chromatherapy lights are turned off, press the light control switch (located opposite of the
pump control switch). The chromatherapy lights will begin to cycle through each of the colors
(sweep mode). The light control switch flashes blue in the sweep mode.

If desired, press the light control switch to lock in one constant color. The light control switch is a
constant blue in this mode.

Press the light control button to turn the chromatherapy lights off.

Kohler Co. 7 1019731-5-D

Power On/Off

Heater On/Off

Power On/Off

Heater
On/Off

Chromatherapy
Specific Color
Selection

Effervescence Mode

Chromatherapy
Cycle

Remote Control

The waterproof remote control is designed to be used in the bath and will float in the water. The remote
places the whirlpool functions at your fingertips to further enhance your bathing experience. The functions
of the remote are identical to the user keypad.

NOTE: There are two types of remote controls available: (1) a basic unit which controls the power and
heater or (2) an enhanced unit which controls chromatherapy and effervescence. Identify your remote
control type, then follow the applicable directions.

NOTE: The heater will not operate if the pump is off.

Basic Unit

Power Turns the pump on and off.
Heater Turns the heater on and off. The indicator ring will appear light green or yellow green in

Enhanced Unit

Power Turns the pump on and off.
Heater Turns the heater on and off. The indicator ring will appear light green or yellow green in

Effervescence
Mode

Chromatherapy
Cycle

Chromatherapy
Specific Color

Batteries

To install or replace batteries: Unscrew the cap, then insert two AAA batteries (not included) as
illustrated. Securely tighten the cap, ensuring the cap makes contact with the seal.

Program

NOTE: If the remote control or pump control was replaced, programming the remote control is necessary.

NOTE: The breaker controlling the power to the overflowing bath must be turned off. The following steps

must be performed within three minutes after restoring power.

color when the heater is off and dark green when the heater is on.

color when the heater is off and dark green when the heater is on.
Press the effervescence icon to turn the pump off and activate the effervescence mode.

Press the effervescence icon again to turn the pump on.
Press the chromatherapy cycle icon to activate and cycle the chromatherapy lights.

Press the chromatherapy specific color icon to lock an individual chromatherapy light
color in.

Turn off the breaker controlling power to the overflowing bath. Turn the breaker on. The pump
control switch will flash for three minutes between yellow and green.

1019731-5-D 8 Kohler Co.

Remote Control (cont.)

Press the pump control switch. The pump control switch will flash green.

NOTE: Press any button on the remote control within three minutes to ensure the overflowing bath
responds to the remote control.

Press any button on the remote. The overflowing bath will only respond to this remote.

Care and Cleaning

For best results, keep the following in mind when caring for your KOHLER product:

•

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.

•

Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.

•

Do not allow cleaners to soak on surfaces.

•

Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.

For detailed cleaning information and products to consider, visit www.kohler.com/clean. To order Care &
Cleaning information, call 1-800-456-4537.

Flush System

NOTE: Flush your whirlpool system twice a month or more, depending upon usage.

Make sure the metal suction screen is clean and placed correctly over the plastic suction cover.

Fill the bathing well with hot water so the bathing well overflows the bathing well rim and flows
into the overflow channel to the drain overflow, and so both overflow channel sensors are
completely covered with water. The green light in the pump control switch will start to blink
automatically within 1/2 minute after the overflow channel sensors are completely submerged.

Add 2 teaspoons of a low-foaming dishwasher detergent, and 20 ounces (590 ml) of household
bleach to the water.

Press the pump control switch button, and let the unit run for 5 to 10 minutes.
Press the pump control switch button a second time to turn off the unit.
Completely drain the unit.
Wipe the surface dry with a clean, soft cloth.

Warranty

ONE-YEAR LIMITED WARRANTY

KOHLER plumbing products are warranted to be free of defects in material and workmanship for one year
from date of installation.

Kohler Co. will, at its election, repair, replace or make appropriate adjustment where Kohler Co. inspection
discloses any such defects occurring in normal usage within one (1) year after installation. Kohler Co. is not
responsible for removal or installation costs. Use of in-tank toilet cleaners will void the warranty.

To obtain warranty service contact Kohler Co. either through your Dealer, Plumbing Contractor, Home
Center or E-tailer, or by writing Kohler Co., Attn.: Customer Care Center, 444 Highland Drive, Kohler, WI
53044, USA, or by calling 1-800-4KOHLER (1-800-456-4537) from within the USA and Canada, and
001-877-680-1310 from within Mexico.

IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE EXPRESSLY LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY. KOHLER CO. AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states/provinces do not allow limitations on how

Kohler Co. 9 1019731-5-D

Warranty (cont.)

long an implied warranty lasts, or the exclusion or limitation of special, incidental or consequential damages,
so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights. You
may also have other rights which vary from state/province to state/province.

This is Kohler Co.’s exclusive written warranty.

One-Year Warranty

KOHLER CO.
It is recommended that at the time of purchase, you verify that all accessories and components are complete

in this package.
This Kohler product is warranted to be free of defects in material and workmanship for one (1) year from the

date of purchase as shown on the invoice or receipt.

1. Kohler Co. will only service its commercialized products through its authorized distributors.

2. To obtain warranty service, please present the invoice and corresponding warranty.

3. Through its authorized distributors, Kohler Co. promises to repair the defective product or provide a new
replacement or an equivalent model (in those cases that the model has been discontinued) when the product
is beyond repair, without any charge to the consumer.

4. The time of repair will not exceed six (6) weeks commencing on the date the product is received.

5. It is recommended that the consumer save the invoice or receipt as additional protection, as it may
substitute the warranty in the case that there is a discrepancy in the validity of the warranty.

EXCEPTIONS AND RESTRICTIONS
The Warranty will not be valid in the following cases:

1. When the product is not operated in accordance with the instructions concerning use and operation set
forth in the owner’s manual or installation instructions, and when the recommendations and warnings
included are not observed.

2. When the product has been modified or dismantled partially or totally; or has been used in a negligent
fashion and as a consequence has suffered damages attributable to the consumer, individual, or hardware not
authorized by Kohler Co.

3. This warranty does not cover the damages as a result of disaster such as fire or acts of God, including
flooding, earthquake, or electric storms, etc. To obtain a list of distributors in your area where you can
exercise your rights under this warranty, please call 001-877-680-1310.

KOHLER CO., KOHLER, WI 53044 U.S.A.

IMPORTER:

INTERNACIONAL DE CERÁMICA, S.A.B. DE C.V.
AV. CARLOS PACHECO NO. 7200
CHIHUAHUA, CHIH., MEXICO C.P. 31060
TEL: [phone]

Troubleshooting

For warranty service, contact your dealer or wholesale distributor. This Troubleshooting Guide is for general
aid only. Contact a Kohler Authorized Service Representative or a qualified electrician to correct all electrical
problems.

1019731-5-D 10 Kohler Co.

Troubleshooting (cont.)

Symptoms Probable Causes Recommended Action

1. Green light in

pump control
switch flashes
before the bathing
well is full of
water.

A. Spout fills directly into overflow

channel.

B. One or both butterfly valves do not

work.

A. Adjust/reinstall the spout to fill

directly into the bathing well. Refer to
the installer/dealer.

B. Check the butterfly valve wiring or

replace the butterfly valves. Refer to
the installer/dealer.

C. Control does not work. C. Check the wiring or replace the

control. Refer to the installer/dealer.

2. Product does not

start.

A. No power to unit. A. Turn on the power to the unit, or

correct the source of the power loss.
Refer to the installer/dealer.

B. Water does not cover the overflow

channel sensors.

B. Fill the bathing well until water flows

over the bathing well rim, into the
overflow channel, and covers the
overflow channel sensors. Suggested
fill level is to the drain overflow.

C. Pump control switch does not light

up or flash when the unit is running
or filled as required.

C. Check the wiring or replace the pump

control switch. Refer to the
installer/dealer.

D. Pump/motor does not work. D. Rebuild or replace the pump/motor.

Refer to the installer/dealer.

E. Control does not work. E. Check the wiring or replace the

control. Refer to the installer/dealer.

3. Water does not

cascade evenly
over the entire
bathing well rim.

A. Unit is not level. A. Level the unit by using the wrench

provided to turn the adjustable feet
up or down as needed.

B. Bathing well ports are blocked. B. Remove blockage.
C. Metal suction screen is blocked. C. Clean the metal suction screen.

4. Unit stops

automatically
before 18 minutes.

A. GFCI/RCD trips. A. Identify the source of the fault and

correct. Refer to the installer/dealer.

B. Motor overheated and protection

device activated.

B. Check for blockage of the motor vent.

Allow the motor to cool, then remove
the blockage.
Check for a plugged metal suction
screen, and allow the motor to cool
before restarting.
Check for blockage of the bathing
well ports. Remove the blockage, and
allow the motor to cool before
restarting.

C. Water level drops below the overflow

channel sensors during operation
(″yellow″ ring will be flashing on
pump switch).

C. Fill the bathing well until water flows

over the bathing well rim, into the
overflow channel, and covers the
overflow channel sensors. Suggested
fill level is to the drain overflow.
Make sure the bath drain seals
properly.

Kohler Co. 11 1019731-5-D

Troubleshooting (cont.)

Symptoms Probable Causes Recommended Action

5. Noisy operation. A. Metal suction screen is not in place

over the plastic suction cover.

A. Position the metal suction screen over

the plastic suction cover to prevent
cavitation.

B. Insufficient water level in the

overflow channel.

B. Fill the bathing well until water flows

over the bathing well rim, into the
overflow channel, and covers the
overflow channel sensors. Suggested
fill level is to the drain overflow.
Make sure the bath drain seals
properly.

C. Pump/motor rattles. C. Make sure the pump/motor banding

straps have been cut.

6. Water

temperature drops
significantly over
20 minutes of
operation.

7. Chromatherapy

lights do not
work.

A. Heater limit switch tripped. Indicator

A. Reset the GFCI/RCD.

light should be ″On″ during
operation.

B. Heater does not work. B. Check the wiring or replace the

heater. Refer to the installer/dealer.

A. Damaged wiring harness. A. Check the wiring harness. Refer to

the installer/dealer.

B. Control does not work. B. Check wiring or replace the control.

Refer to the installer/dealer.

8. Remote control

does not work.

A. Batteries improperly installed or

dead.

B. Antenna on wiring harness is

damaged.

C. Remote control not programmed

correctly.

A. Replace batteries.

B. Replace wiring harness. Refer to the

installer/dealer.

C. See remote control Homeowners

Guide or Service Manual.

D. Remote control does not work. D. Replace remote control. Refer to the

installer/dealer.

E. Control does not work. E. Replace control. Refer to the

installer/dealer.

9. Water does not

reach bath rim
upon filling.

A. No power to the unit. A. Turn on the power.
B. Level probe wires loose. B. Check/reconnect wires. Refer to the

installer/dealer.

C. Butterfly valves do not work. C. Check wiring; replace butterfly valves

if necessary. Refer to the
installer/dealer.

D. Control does not work. D.

Replace control. Refer to the
installer/dealer.

1019731-5-D 12 Kohler Co.

*Note: All tubing 1-1/4" unless otherwise noted.

1" Tubing

1" Tubing

1" Tubing

1/2" Tubing

1" Tubing

1/2" Tubing

**Finish/color code must be specified when ordering.

Service Parts

Kohler Co. 13 1019731-5-D

1" Tubing

1/2" Tubing

1019933

Chromatherapy Lights

93192

Screw

1003773

Leveling Plate

1004779

Screw

93192

Screw

1015025 (-C1 Models)
Plug/Wire Assembly

63270

Washer

1005259

Wrench

1012821

Light Housing

73519

Water Level Probe

60129

Nut

1021777

Wire Harness

1010618

Elbow

63270

Washer

60129

Nut

1015016 (-C1 Models)
Plug/Wire Assembly

1015010 (-C1,-RE Models)
Plug/Wire Assembly

1020078

Plug/Wire Assembly

(-RE Models)

1020079 (-RE Models)
Plug/Wire Assembly

**Finish/color code must be specified when ordering.

1017879 (Pump)
1017880 (Light)

Switch

1007931

Medallion

1003771

Bezel

1003772

Housing

1019731-5-D 14 Kohler Co.

1004262**

Suction Screen

1004861**

Handle

1004243**

Base

93836 (1/2")
93838 (1")
93839 (1-1/4")
94853 (1-1/2")

Tube (w/Couplings)

1005260

Cap

91967

Check Valve

1003065

Suction Flange
Removal Tool

See above for suction
screen detail.

65054**

Screw

96895**

Suction Cover

65886

Gasket

1004263

Screen

69472

Washer

94822-D

Screw

65226**

Suction Plug

96708

Flange

93685

Housing

93315

Gasket

1001878

Housing

93552**

Flange Cap

1035480**

Flange

73518

Plug

96744

Flange Removal Tool

**Finish/color code must be specified when ordering.

Kohler Co. 15 1019731-5-D

67065

Ground Lug

61845-K

Copper Grounding Wire

60320

Screw

61776

Lock Washer

93892-A

Electrical Box

60320

Screw

1017279

Pump

1033678

Screw

93893

Cover

61776

Lock Washer

67065

Ground Lug

93003

Strain Relief

1019722

Impeller

1001794

Locknut

1016954-A

Motor

93192

Screw

1019720

Pump Bracket

1019433

Carriage Bolt

90153

Nut

1018964

Heater Bracket

To Heater

1005520

Screw

1005357

Cover

1005359

O-Ring

1018664

Control

1017278

Volute

1019444-E

Spacer

73504

Adapter

60985

Seal

1019446-E

Stud

1019447-B

Isolation Mount

**Finish/color code must be specified when ordering.

1019731-5-D 16 Kohler Co.

1018711

Heater

To Pump

94821

O-Ring

1012653

Adapter

1080774

Union Assembly

1019733

Butterfly Assembly

Butterfly & Motor Service Parts Detail

96956

Butterfly Kit

1012916

Nut w/Screws

94821

O-Ring

94821

O-Ring

1011679

Gasket

See below for butterfly and
motor service parts detail.

94821

O-Ring

1080774

Union Assembly

63149

Screw

50506

Screw

1016466

Motor

**Finish/color code must be specified when ordering.

Kohler Co. 17 1019731-5-D

1022495

Nut Wrench