![](/html/41/4163/4163de6416945ea189122db52fa41ef70fce4ad018d04cb8f87f2264e1fce37f/bg1.png)
ARCHERTM
Features
Acrylic
•
Left or right drain
•
Integral apron
•
Integral tile flange
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
60″ (152.4 cm) x 32″ (81.3 cm) x 19″ (48.3 cm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ICC/ANSI A117.1
•
CSA B45
•
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
Specified Model
5’ (1.5 m) BATH WITH INTEGRAL
APRON
K-1123-LA
ALSO K-1123-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1123-LA Bath with integral apron, left drain ❑ 0 ❑ Other_____
K-1123-RA Bath with integral apron, right drain ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Product Specification:
The acrylic bath shall be 60″ (152.4 cm) in length, 32″ (81.3 cm) in width, and 19″ (48.3 cm) in height. Bath shall have left or
right drain. Bath shall have slotted overflow for maximum bathing depth, low threshold height, and integral lumbar support. Bath
shall have integral apron and integral tile flange. Bath shall have armrests. Bath shall be Kohler Model K-1123-______-______.
Page 1 of 2
1071355-4-
C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
![](/html/41/4163/4163de6416945ea189122db52fa41ef70fce4ad018d04cb8f87f2264e1fce37f/bg2.png)
ARCHERTM
Technical Information
Fixture*:
Bathing well
Basin area bottom 45-1/8″ (114.6 cm) x 19-11/16″
(50 cm)
Basin area top 52-3/4″ (134 cm) x 25-5/16″
(64.3 cm)
Weight 80 lbs (36.3 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 45 lbs/square foot (216 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
16" (40.6 cm)
1-1/4"
(3.2 cm)
2-1/2"
(6.4 cm)
1-1/2"
Bath Drain
11-1/4"
(28.6 cm)
60" (152.4 cm)
4-1/8"
(10.5 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
32" (81.3 cm)
19"
(48.3 cm)
3/4" (1.9 cm)
Product Diagram
ARCHERTM 5’ (1.5 m) BATH WITH INTEGRAL APRON
Page2of2
1071355-4-
C