Kohler K1122RA0 Specifications

Roughing-In

K-1122-LA, K-1122-RA

ARCHER

TM

5’ (1.5 m) BATH WHIRLPOOL WITH INTEGRAL APRON

Product Information

Applicable product:
Bath whirlpool with integral apron, left

drain
Bath whirlpool with integral apron, right

drain

Fixture*:
Bathing well:
Basin area, bottom 45-1/8″ (114.6 cm) x 19-11/16″

(50 cm)

Basin area, top 52-3/4″ (134 cm) x 25-5/16″

(64.3 cm)
Weight 135 lbs (61.2 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.

Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24″ (61 cm) grounding-type plug-in

cord.

K-1122-LA

K-1122-RA

Required accessories:
Clearflo slotted overflow brass bath drain OR K-7271
Clearflo slotted overflow bath drain – PVC

pipe

K-7272

Required Electrical Service

Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):

Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″

(61 cm) of the pump.

Installation Notes

Install this product according to the installation guide.

Floor support under this product must provide for a minimum
of 49 lbs/square foot (240 kg/square meter) loading.

The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.

Will comply with ADA when installed per Section 607
Bathtubs of the Act.

Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.

16"
(40.6 cm)

1-1/4"
(3.2 cm)

2-1/2"
(6.4 cm)

1-1/2"
Bath Drain

11-1/4"
(28.6 cm)

60" (152.4 cm)

4-1/8"
(10.5 cm)

3/4"
(1.9 cm)

No change in measurements if connected
with drain illustrated. (K-7272)

1-1/4"
(3.2 cm)

1/2" (1.3 cm) R.

Integral Flange

Detail

32" (81.3 cm)

19"
(48.3 cm)

ARCHERTM 5’ (1.5 m) BATH WHIRLPOOL WITH INTEGRAL APRON
1071358-1-

D