Kohler K11220 User Manual
ARCHERTM
Features
Acrylic
•
8 color-matched Kohler hydro-massage jets
•
Pump with air switch and grounding-type plug-in cord
•
Integral lumbar support
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Armrests
•
60″ (152.4 cm) x 32″ (81.3 cm) x 19″ (48.3 cm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ANSI Z124.1.2
•
ASME A112.19.7M
•
ASTM E162
•
ASTM E662
•
ICC/ANSI A117.1
•
UL 1795
•
Specified Model
5’ (1.5 m) BATH WHIRLPOOL
K-1122
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1122 Drop-in rim style bath whirlpool ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Product Specification
The acrylic bath whirlpool shall be 60″ (152.4 cm) in length, 32″ (81.3 cm) in width, and 19″ (48.3 cm) in height. Bath whirlpool
shall feature 8 color-matched jets. Bath whirlpool shall feature a pump with air switch and grounding-type plug-in cord. Bath
whirlpool shall have slotted overflow for maximum bathing depth, low threshold height, and integral lumbar support. Bath shall
have armrests. Bath whirlpool shall be Kohler Model K-1122-______.
Page 1 of 2
1071356-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
ARCHERTM
Technical Information
Fixture*:
Bathing well
Basin area, bottom 45-1/8″ (114.6 cm) x
19-11/16″ (50 cm)
Basin area, top 52-3/4″ (134 cm) x
25-5/16″ (64.3 cm)
Weight 110 lbs (50 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (148.6 cm) x 30-1/2″ (77.5 cm)
Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24″ (61 cm) grounding-type plug-in
cord.
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″ (61
cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 46 lbs/square foot (227 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
16"
(40.6 cm)
1-1/4"
(3.2 cm)
2-1/2"
(6.4 cm)
1-1/2"
Bath Drain
11-1/4"
(28.6 cm)
60" (152.4 cm)
4-1/8"
(10.5 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/2"
(3.8 cm)
Drop-in Rim Detail
Pump/Control Access
20" (50.8 cm) W x 15" (38.1 cm) H
32" (81.3 cm)
19"
(48.3 cm)
3/4" (1.9 cm)
ARCHERTM 5’ (1.5 m) BATH WHIRLPOOL
Page2of2
1071356-4-
E
Product Diagram
Loading...