Kohler K1110V96 User Manual
PURIST
®
Features
Acrylic
•
Variable speed pump with 1.5 kW heater, back-lit
•
user keypad and remote control
6 Flexjets
•
Ten color-matched sequencing Bodyssage
•
Two pulsating neckjets with pillow
•
8 effervescent ports
•
4 chromatherapy lights
•
Overflows into horizontal overflow drain for maximum
•
bathing depth
Coordinates with the Purist
•
Deep bathing well 19-1/4″ (48. 9 cm)
•
72″ (182.9 cm) x 46″ (116.8 cm) x
•
23-3/16″ (58.9 cm)
TM
TM backjets
Suite
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
ASME A112.19.7M
•
UL 1795
•
Specified Model
BATH WHIRLPOOL WITH
SPA/MASSAGE PACKAGE
K-1110-V
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1110-V Bath whirlpool with Spa/Massage Package ❑ 0 ❑ Other_____
Required Accessories
K-7273 Clearflo horizontal overflow bath drain ❑ CP ❑ Other_____
Optional Accessories
K-1601 Footstop ❑ 0 ❑ Other_____
Product Specification
The acrylic bath whirlpool shall be 72″ (182.9 cm) in length, 46″ (116.8 cm) in width, and 23-3/16″ (58.9 cm) in height. Product
shall have a variable speed pump with 1.5 kW heater, back-lit user keypad, and remote control. Product shall feature 6 Flexjets,
8 effervescence ports, 4 chromatherapy lights, ten color-matched sequencing Bodyssage backjets, and two pulsating neckjets
with pillow. Product shall overflow into a horizontal overflow drain for maximum bathing depth. Product shall have a 19-1/4″ (48.
9 cm) deep bathing well. Product shall coordinate with Purist Suite. Bath whirlpool shall be Kohler Model K-1110-V-____.
Page 1 of 2
1023259-4-
D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
PURIST
®
Technical Information
Required Electrical Service
Fixture:*
Bathing well:
Basin area, bottom 45″ (114.3 cm) x 25-1/2″ (64.8 cm)
Basin area, top 63″ (160 cm) x 31-1/2″ (80 cm)
Weight 160 lbs (72.6 kg)
To overflow:
Water depth to rim 19-1/4″ (48.9 cm)
Capacity 96 gal (363.4 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1016369-7
Pump Heater V Hz A
1.5 kW 240 50/60 15
No change in measurements with drain illustrated. (K-7273)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Pump/piping protrudes beyond rim (see below).
Floor support under whirlpool must provide a minimum of 43
lbs/square foot (210 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
12-3/16"
(31 cm)
3-15/16"
(10 cm)
46"
(116.8 cm)
Pump/Piping Protrudes
Note:
23-3/16"
(58.9 cm)
Beyond Rim.
1-3/16" (3 cm)
22"
(55.9 cm)
2-3/4" (7 cm) Max.
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min
1-3/8"
(3.5 cm)
Product Diagram
PURIST®BATH WHIRLPOOL WITH SPA/MASSAGE PACKAGE
Page2of2
1023259-4-
D
6" (15.2 cm)
7/16" (1.1 cm)
23"
(58.4 cm)
6"
(15.2 cm)
6-1/2"
(16.5 cm)
4" (10.2 cm)
3-3/8" (8.6 cm)
72" (182.9 cm)
5-1/2"
(14 cm)
1-1/2" OD
Loading...