Kohler K1110V96 Specifications

Roughing-In

K-1110-V
PURIST

BATH WHIRLPOOL WITH SPA/MASSAGE PACKAGE

®

Product Information

Fixture:*
Bathing well:
Basin area, bottom 45″ (114.3 cm) x 25-1/2″ (64.8 cm)
Basin area, top 63″ (160 cm) x 31-1/2″ (80 cm)
Weight 160 lbs (72.6 kg)
To overflow:
Water depth to rim 19-1/4″ (48.9 cm)
Capacity 96 gal (363.4 L)
* Approximate measurements for comparison only.

Included components:
Cut-out template 1016369-7

Pump Heater V Hz A

1.5 kW 240 50/60 15

Required accessories:
Clearflo horizontal overflow bath drain K-7273

Required Electrical Service

Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):

Pump/control 220-240 V, 20 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Pump/piping protrudes beyond rim (see below).

Floor support under whirlpool must provide a minimum of 43
lbs/square foot (210 kg/square meter) loading.

Hot water supply should be 70% of capacity or greater.
Installations will vary.

Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.

No change in measurements with drain illustrated. (K-7273)

46"
(116.8 cm)

Pump/Piping Protrudes

Note:

Beyond Rim.

2-3/4" (7 cm) Max.

Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min

1-3/8"

23-3/16"
(58.9 cm)

1-3/16" (3 cm)

22"
(55.9 cm)

(3.5 cm)

6" (15.2 cm)

7/16" (1.1 cm)

6"
(15.2 cm)

3-3/8" (8.6 cm)

72" (182.9 cm)

12-3/16"
(31 cm)

4" (10.2 cm)

3-15/16"
(10 cm)

23"
(58.4 cm)

6-1/2"
(16.5 cm)

5-1/2"
(14 cm)

1-1/2" OD

PURIST®BATH WHIRLPOOL WITH SPA/MASSAGE PACKAGE
1023259-1-

C