Kohler 8030A User Manual
Watertile Rainshower
Installation and User Guide
MODEL NUMBERS
8030A
Important! Please quote the above model number(s) when ordering spares
IMPORTANT
INSTALLER: THIS MANUAL IS THE PROPERTY OF THE
CUSTOMER AND MUST BE RETAINED WITH THE PRODUCT
FOR MAINTENANCE AND OPERATIONAL PURPOSES.
1071288-AN2-F 09/03/12
1
2
1071288-AN2-F 09/03/12
1/2" NPT
79 mm
Min Clearance
Center of
Water Inlet
251 mm
67 mm
60 mm
217 mm
127 mm
BEFORE YOU BEGIN
All information is based on the latest product information available at the time
of publication. Kohler Co. reserves the right to make changes in product
characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. An in line water filter must be used with this product.
3. Inspect the supply pipes for damage. Replace as necessary.
4. Observe local plumbing codes.
5. The recommended working pressure for the shower head is 150KPa to
500KPa. If the pressure exceeds 500KPa a pressure reducer is required.
6. Maximum water and environmental temperature for the shower head is
60C. Note: If a heater is present, make sure to keep it away from the shower
head as otherwise the environmental temperature may exceed 60C.
7. All installations should comply with the relevant requirements of AS/NZS
3500 and AS/NZS 6400.
DIMENSIONS
3
1071288-AN2-F 09/03/12
SPECIFICATION
Pressures
The minimum recommended operating pressure is 1.5 bar.
For multiple outlets an operating pressure of 3.0 bar or greater is recommended to
ensure optimum performance.
Plumbing Connections
Mixed water from a valve must be connected to the inlet of a pressure balance
loop.
Building in Depth
Note! Minimum building in depth is 79 mm. It is recommended that a minimum stud
wall cavity of 100 mm is provided to ease installation.
INSTALLATION
Before you Begin
1. Turn off the water supply.
2. Make sure that the Watertile Rainshower is installed by a competent installer.
3. Before installation carefully inspect the new fixture for any signs of damage.
4. Kohler Co. reserves the right to make revisions in the design of products without
notice.
Loading...