Kodak Scan Station 700 Plus User Manual

Cleaning the imaging area

Indicator Lights

The power button is illuminated blue when the Scan Station is on and ready. Following is a description of LED status:

LED Remedy

Steady blue Scan Station is on and ready to

scan.

Flashing blue Indicates the Scan Station is

initializing from powering on or warming up and preparing to scan.

Flashing or steady red

Indicates a Scan Station error, such as the Scan Station cover is open.

Supplies and Accessories

CAT No. Description

148 4864 Kodak Feed Rollers

173 6115 Kodak Separation Module

826 9607 Kodak Feed Module

100 2716 Kodak Roller Cleaning Pads

169 0783 Kodak Transport Cleaning Sheets

896 5519 Staticide Wipes for Kodak Scanners

Maintenance Reference Guide

IMPORTANT:

 Staticide Wipes contain isopropanol which can cause

eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the Safety Data Sheet (SDS) for more information (www.kodakalaris.com/go/ehs).

All trademarks and trade names used are the property of their respective holders.

The Kodak trademark and trade dress are used under license from Eastman Kodak Company.

A-61921 / Part # 5K8638 August 2019

Support Information

www.AlarisWorld.com/go/imsupport

When contacting support, have the following available:

• A description of your problem

• Scanner model and serial number

• Computer configuration

• Software application you are using

Cleaning the rollers

Cleaning and replacing the

separation module

Cleaning and replacing the

feed module

For detailed cleaning and replacement procedures see Chapter 11, Maintenance in the Administrator’s Guide.