Kodak KAI-2093 User Manual

PRODUCT SUMMARY

KODAK KAI-2093 IMAGE SENSOR
1920 (H) X 1080 (V) PROGRESSIVE SCAN INTERLINE CCD IMAGE SENSOR

DESCRIPTION

The KODAK KAI-2093 Image Sensor is a high­performance multi-megapixel image sensor designed for a wide range of medical imaging and machine vision applications.
The 7.4 µm square pixels with microlenses provide high sensitivity and the large full well capacity results in high dynamic range. The split horizontal register offers a choice of single or dual output allowing either 15 or 30 frame per second (fps). The architecture allows for either progressive scan or interlaced readout. The imager features 5V clocking to facilitate camera design. The vertical overflow drain structure provides antiblooming protection, and enables electronic shuttering for precise exposure control.

FEATURES

Progressive scan (non-interlaced)
HCCD and output amplifier capable of 40 MHz
operation
5 V HCCD clocking
Single or dual video output operation
28 light shielded reference columns per output
Only 2 vertical CCD clocks and 2 horizontal CCD
clocks
Electronic shutter
Low Dark Current
Antiblooming protection

APPLICATIONS

Industrial Imaging
Scientific Imaging
Parameter Typical Value
Architecture
Total Number of Pixels 1984 (H) x 1092 (V) Number of Effective Pixels 1928 (H) x 1084(V) Number of Active Pixels 1920 (H) x 1080 (V) Pixel Size 7.4 µm (H) x 7.4 µm (V)
Active Image Size
Aspect Ratio 16:9 Number of Outputs 1 or 2 Saturation Signal 40,000 electrons Output Sensitivity 14 µV/electron Quantum Efficiency KAI-2093-ABA (490 nm) Quantum Efficiency KAI-2093-CBA R(620 nm), G(540nm), B(460nm) Total Noise 40 electrons rms Dark Current (Typical) <0.5 nA/cm2 Dynamic Range 60 dB Blooming Suppression 100 X Smear <0.03% Image Lag <10 electrons Frame Rate
Single Output, 20 MHz Single Output, 35 MHz
Dual Outputs, 20 MHz
Dual Outputs, 37 MHz Maximum Data Rate 40 MHz/Channel (2 channels) Package 32 pin CERDIP
Cover Glass
Parameters above are specified at T = 40° C unless otherwise noted.
Interline CCD, Progressive Scan or Interlaced Readout
14.208 mm (H) x 7.992 mm (V)
16.3 mm (diagonal)
40%
37%, 34%, 30%
9 fps 15 fps 17 fps 30 fps
Clear Glass or Quartz Glass with AR Coating, 2 sides
©Eastman Kodak Company, 2007 www.kodak.com/go/imagers Revision 3.0 MTD/PS-0307

ORDERING INFORMATION

Catalog Number Product Name Description Marking Code
2H4736 KAI- 2093-AAA-CP-AE
2H4617 KAI- 2093-AAA-CP-BA
2H4728 KAI- 2093-ABA-CB-AE
4H0174 KAI- 2093-ABA-CB-B1
2H4725 KAI- 2093-ABA-CB-B2
2H4923 KAI- 2093-ABA-CK-AE
2H4920 KAI- 2093-ABA-CK-BA
2H4618 KAI- 2093-ABA-CP-AE
2H4616 KAI- 2093-ABA-CP-BA
4H0137 KAI- 2093-CBA-CB-AE
4H0136 KAI- 2093-CBA-CB-BA
4H0705 KEK-4H0705-KAI-2093-10-40 Evaluation Board, 10 Bit, 40 MHz (Complete Kit) n/a 4H0706 KEK-4H0706-KAI-2093-12-20 Evaluation Board, 12 Bit, 20 MHz (Complete Kit) n/a
Monochrome, No Microlens, CERDIP Package (sidebrazed), Taped Clear Cover Glass (no coatings), Engineering Sample Monochrome, No Microlens, CERDIP Package (sidebrazed), Taped Clear Cover Glass (no coatings), Standard Grade Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Clear Cover Glass (no coatings), Engineering Sample Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Clear Cover Glass (no coatings), Grade 1 Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Clear Cover Glass (no coatings), Grade 2 Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Quartz Cover Glass with AR coating (both sides), Engineering Sample Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Quartz Cover Glass with AR coating (both sides), Standard Grade Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Taped Clear Cover Glass (no coatings), Engineering Sample Monochrome, Telecentric Microlens, CERDIP Package (sidebrazed), Taped Clear Cover Glass (no coatings), Standard Grade Color (Bayer RGB), Telecentric Microlens, CERDIP Package (sidebrazed), Clear Cover Glass (no coatings), Engineering Sample Color (Bayer RGB), Telecentric Microlens, CERDIP Package (sidebrazed), Clear Cover Glass (no coatings), Standard Grade
KAI-2093
Serial Number
KAI-2093M
Serial Number
KAI-2093CM
Serial Number
Please see the User’s Manual (MTD/PS-0715) for information on the Evaluation Kit for this part.
Please see ISS Application Note “Product Naming Convention” (MTD/PS-0892) for a full description of naming convention used for KODAK image sensors.
Address all inquiries and purchase orders to:
Image Sensor Solutions Eastman Kodak Company Rochester, New York 14650-2010
Phone: (585) 722-4385 Fax: (585) 477-4947 E-mail:
imagers@kodak.com
Kodak reserves the right to change any information contained herein without notice. All information furnished by Kodak is believed to be accurate.
©Eastman Kodak Company, 2007 www.kodak.com/go/imagers Revision 3.0 MTD/PS-0307
Loading...