Kodak KAF-6303E User Manual

PRODUCT SUMMARY

KODAK KAF-6303E IMAGE SENSOR

3072 (H) X 2048 (V) FULL FRAME CCD IMAGE SENSOR

DESCRIPTION

The KAF-6303E is a high performance monochrome area CCD (charge-coupled device) image sensor with 3072H x 2048V photo active pixels designed for a wide range of image sensing applications in the 0.3 nm to 1.0 nm wavelength band. Typical applications include military, scientific, and industrial imaging. A 74dB dynamic range is possible operating at room temperature.

The sensor is built with a true two-phase CCD technology. This technology simplifies the support circuits that drive the sensor and reduces the dark current without compromising charge capacity. The transparent gate results in spectral response increased ten times at 400nm, co standard polysilico

mpared to a front side illuminated

n gate technology. The sensitivity is increased 50% over the rest of the visible wavelengths. Total chip size is 29.0 mm x 19.1 mm and is housed in a 26-pin, 0.88” wide DIL ceramic package with 0.1” pin spacing.

FEATURES

• 6M Pixel Area CCD

• 3072H x 2048V (9 µm) Pixels

• Transparent Gate True Two Phase Technology

(Enhanced Spectral Response)

• 2-Phase Register Clocking

• 100% Fill Factor

• Low Dark Current (<10pA/cm2 at 25° C)

APPLICATION

Medical Imaging

•

P Typical Value

arameter

Ar Full Frame CCD chitecture T 3088(H) x 2056(V)) otal Number of Pixels

umber of Active Pixels

Pixel Size 9 µm (H) x 9 µm (V) Active Image Size 27.65 mm (H) x 18.48 mm (V) Chip Size 29.0 mm (H) x 19.1 mm (V) Saturation Signal 100,000 electrons Output Sensitivity 10 µV/electron Qu , 550, 650

antum Efficiency (450 nm) Readout Noise (10 MHz) 15 electrons rms Dark Current (T = 25° C, Accumulation Mode) Dark Current Doubling Rate 6°C Dynamic Range (Saturation Signal/Dark Noise) Maximum Data Rate 10 MHz Package CERDIP Package (sidebrazed) Cover Glass Clear or AR coated, 2 sides

3072 (H) x 2048 (

1.6 M

40%, 52%, 65%

<10pA/cm

76 dB

V) = approx.

• Scient

ific Imaging

www.kodak.com/go/imagers

ORDE

Catalog Numbe

4H0703 03-AAA-CD-B2

4H0704 KAF- 6303-AAA-CD-A

4H0481 KAF- 6303-AAA-CP-B2

2H4478 KAF- 6303-AAA-CP-AE

4H0079 KEK-4H0079-KAF-6303-12-5 Evaluation Board (Complete Kit) N/A

RING INFORMATION

Product Nam

KAF- 63

e escription Marking Code

Monochrome, No Microlen Glass with AR coating ( Monochrome, No Microlens, CERDIP Package (sidebrazed), Clear Cover Glass with AR coating (both sides), Engineering Sample Monochrome, No Microlens, CERDIP Package (sidebrazed), Taped Clear Cover Glass, no coatings, Grade 2 Monochrome, No Microlens, CERDIP Package (sidebrazed), Taped Clear Cover Glass, no coatings, Engineering Sample

s, CERDIP Package (sidebrazed), Clear Cover

both sides), Grade 2

KAF-6303-AAA

[Serial Number]

Please see ISS Application Note “Product Naming Convention” (MTD/PS-0892) for a full description of naming convention used for KODAK image sensors.

For all reference documentation, please visit our Web Site at www.kodak.com/go/imagers.

Address all inquiries and purchase orders to:

Image Sensor Solutions Eastman Kodak Company Rochester, New York 14650-2010

Phone: (585) 722-4385 Fax: (585) 477-4947 E-mail:

imagers@kodak.com

Kodak reserves the right to change any information contained herein without notice. All information furnished by Kodak is believed to be accurate.