Kodak KAF-10500 User Manual

PRODUCT SUMMARY

KODAK KAF-10500 IMAGE SENSOR
3970 (H) X 2646 (V) FULL FRAME CCD COLOR IMAGE SENSOR

DESCRIPTION

The KAF-10500 is a dual output, high performance color CCD (charge coupled device) image sensor with 3970(H) x 2646(V) photoactive pixels designed for a wide range of color image sensing applications including digital imaging. Each pixel contains anti-blooming protection by means of a lateral overflow drain thereby preventing image corruption during high light level conditions. Each of the 6.8μm square pixels are selectively covered with red, green or blue pigmented filters for color separation. Microlenses are added for improved sensitivity. The total chip size is 28.7 mm x 20.2 mm and is housed in a 60 pin,
40.6 mm x 30.7 mm PGA ceramic package with 0.100” pin spacing.

FEATURES

High resolution
Broad dynamic range
Low noise
Large image area

APPLICATIONS

Digital Still Cameras
Parameter Typical Value
Architecture Full Frame CCD (Square Pixels) Total Number of Pixels 4098 (H) x 2728 (V) = 11.2 Mp Number of Effective Pixels 4010 (H) x 2686 (V) = 10.8 Mp Number of Active Pixels 3970 (H) x 2646 (V) = 10.5 Mp Pixel Size 6.8 μm (H) x 6.8 μm (V)
Active Image Size
Aspect Ratio 3:2 Horizontal Outputs 2 Saturation Signal 60 ke Output Sensitivity 25 μV/e Quantum Efficiency (RGB) 21%, 40%, 32% Read Noise (f=24 MHz) 15 e Dark Signal (T=40 °C) 4 mV Dark Current Doubling Temperature Linear Dynamic Range (f=24 MHz, T=40 °C) Charge Transfer Efficiency (HCTE/VCTE) Blooming Protection (4 ms exposure time) Maximum Data Rate 24 MHz Package Ceramic PGA
Cover Glass
Parameters above specified at T = 20°C unless otherwise noted
27.0 mm (H) x 18.0 mm (V)
32.44 mm (diagonal)
-
-
-
6.3 °C
71.5 dB
0.999995
0.999999
1000X saturation exposure
IR Absorbing with AR Coating (both sides)
©Eastman Kodak Company, 2007 www.kodak.com/go/imagers Revision 5.0 MTD/PS-0962

ORDERING INFORMATION

Catalog
Product Name Description Marking Code
Number
4H0799 KAF-10500-CXA-JH-AA-Offset
4H0800 KAF-10500-CXA-JH-AE-Offset
4H0846 KEK-4H0846-KAF-10500-12-24 Evaluation Board (Complete Kit) N/A
Color (Bayer RGB), Special Microlenses, PGA Package, IR Absorbing Cover Glass with AR coating (both sides), Standard grade Color (Bayer RGB), Special Microlenses, PGA Package, IR Absorbing Cover Glass with AR coating (both sides), Engineering grade
KAF-10500-CXA (Serial Number)
Please see the User’s Manual (MTD/PS-0982) for information on the Evaluation Kit for this part.
Please see ISS Application Note “Product Naming Convention” (MTD/PS-0892) for a full description of naming convention used for KODAK image sensors.
For all reference documentation, please visit our Web Site at www.kodak.com/go/imagers.
Address all inquiries and purchase orders to:
Image Sensor Solutions Eastman Kodak Company Rochester, New York 14650-2010
Phone: (585) 722-4385 Fax: (585) 477-4947 E-mail:
imagers@kodak.com
Kodak reserves the right to change any information contained herein without notice. All information furnished by Kodak is believed to be accurate.
©Eastman Kodak Company, 2007 www.kodak.com/go/imagers Revision 5.0 MTD/PS-0962
Loading...