Kodak K3ARDC User Manual

3.8+0/-0.5

44.0+0/-1.0

10.5+0/-0.5

1.4 +/- 0.4

K3ARDC Ni-MH Rechargeable Battery

Dimensions are in millimeters and include label.

System: Nickel-Metal Hydride battery

Designation: ANSI 1.2H4, IEC HR03

Nominal Voltage: 1.2 Volts

Nominal Capacity: 900 mAh

Minimum Capacity: 800 mAh

Eective: April 23, 2009

Charging Condition: 90 mA for 16h

Max. Discharge: 1.6 A Continuous to 1.0 V

2.4 A Intermittent

Temperature Ranges:

Operating 0°C to +50°C

Storage -20°C to +30°C

Charging Approx. 0°C to +40°C

Weight: 12.5 grams

Terminals: Flat Contacts

Jacket: PVC Label

Internal Impedance: 0.020 Ohms (typical)

Charging Cycles: Up to 400. Maximum life is achieved by shallow discharge and

charge conditions.

Note:

1) No added Mercury / 99.9999% Mercury Free — 2) No added Lead /99.999% Lead Free

3) No added Cadmium / 99.9999% Cadmium Free —4) No added PFOS (Perﬂuorooctane sulfonates)

5) This battery complies with ANSI C18, IEC 60086, and EU Directive 2006/66/EC, 2006/122/EC

6) Batteries are NOT subject to European RoHS regulations

7) MSDS sheets are available on the Kodak website.

8) Operating at extreme temperature will signiﬁcantly aect service and cycle life.

9) For best performance after a long period of non-use, charge and discharge the battery several times.

The Data in this publication represents product tested under the conditions speciﬁed. They do not represent standards or speciﬁcations which must be met by Eastman Kodak Company. Company reserves the right to change and improve product characteristics at any time.

For more information, contact Eastman Kodak Company, 343 State Street, Rochester NY 14650-0811, Phone 1-800-242-2424 www.kodak.com/go/batteries

K3ARDC-900