Cabl e Remo te1111
CAT 131 7015 -EC1
CAT 131 7031 -EC2
CAT 131 7056 -EC3
Ex t ension Cable 8 m
CAT 140 1363123
Tot a l Cable Lengt h3 .7 m
1.3 m18.9 m 26.5 m
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
4
General
n
Remote Control
Infrared
all models
○○○○○○○○○
SP Laser Remote
CAT No 830 0279
EKTAGRAPHIC IR Remote
Control CAT No 109 8383
Note
Individual control of two IR systems in one
room is not possible. Hand transmitter offers
only one channel for transmitting data.
Note
Dimmed fluorescent light (neon) may reduce
max. achievable IR distance!
An IR Control System always consists
of a transmitter and a receiver!
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
5
Remote Control
IR + Extension Cable
n1 Ektalite Projector, IR Remote Control and 7.6 m Extension
Cable for optimal placement of IR Receiver
all models
Extension Cable
CAT No 140 1363
7.6 m
SP Laser Remote
CAT No 830 0279
EKTAGRAPHIC IR Remote
Control CAT No 109 8383
○○○○○○○○○
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
6
Parallel Projection
IR and 2 Receivers
nIR Remote System and a second receiver
EKTAGRAPHIC
500, 1500 and
2000
○○○○○○○○○○○○○○○○○○○○○○
SP Laser Remote
CAT No 830 0279
EKTAGRAPHIC IR Remote
Control CAT No 109 8383
○○○○○○○○○○○○○○○○○○○○○
Note
Parallel projection (side by side projection,
projection in harmony is only possible with a
second IR receiver. Unfortunately this item is
not available as an accessory. So a second IR
remote system is necessary.
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
7
n
Integrated Timer
EKTAGRAPHIC
ATS, AMT, ABR
Endless Projection
Timer
Timer
Setting : 3 - 22 sec
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
8
Autofocus
nImportant Note for use of Autofocus
EKTAGRAPHIC
A, ATS, AMT, ABR
Important
Use either glass or glassless (cardboards)
mounted slides! Never mix up!
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
9
Slide Recording
nCreating 35 mm slides with film recorders
Computer
Filmrecorder (Addresses
page 20)
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
11
Extra Bright Lamp Module
General
nHow it works
All current Kodak Slide Projectors are equipped with the Extra Bright Lamp Module offering
30% more light than compared to former models:
Ö more light
Ö more brillant colors
Ö higher contrast
Ö better legibility
According to a new cold light mirror the biggest part of the IR (heat) light
will be absorbed and not reflected. Therefore the heatfilter could be removed (see illustration). This system is unique to Kodak.
IR Light
Condenser
Removed
Heatfilter
Visible Light
IR Light
Cold Light Mirror
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
12
Extra Bright Lamp Module
(
(
(
)
(
)
Lumen Output/ Compatibility
nLumen output for standard andeconomy setting
/XPH Q 2XWSXW
1400
1200
1000
800
600
400
200
0
Standard Extra Bright
Economy
Standard
nUpgrade
All former Ektalite Projectors can be upgraded with the Extra Bright Lamp Module:
Extra Bright Lamp Modules CAT N O
Ek tagraphic
dark beige co lo r, new 121 7626
Ek tagraphic
blue gray color, old design)139 3982
Ektalite 816 7181
Ek t apro Single
models 3020 and lower
Ektap ro D ua l
models 4010 and higher
718 3379
718 4369
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
13
Extra Bright Lamp Module
Safety Precautions
According to a temperature increase in the slide gate which, therefore, needs more careful
handling when using slides, mounts and lamps.
With the higher light output of the Extra Bright Lamp Module the temperature in the slide gate rises.
To enable a smooth operation following hints should be considered:
√Use only light respectively light gray slide mounts (e.g.
Wess slide mounts). Slide mounts with only one dark side or
black side have to be sorted in respectively, mounted with the
side facing the lamp. Please pay special attention when sorting
your slide mounts in rear projections:
√Do not use a lamp type EXW/15 h for the projector (higher temperature - lamp not
available from Kodak).
√Consider the room temperature! It may not exceed 35 degrees C!
If these hints are not considered, mounts may deform!
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
14
Stackloader
General
For a quick inspection of a stack of slides without the need to arrange them beforehand in a tray.
A stack of thin glassless slides is loaded directly in the Stack Loader. Use the transport forward
button to project the slides.
All EKTAGRAPHIC models
CAT No 151 4249
max 1.5 mm
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
15
nTwo projector dissolve
g
all models
External Control
Hardware Controllers
KODAK Dissolve Control
3URGXFW&$712
EC Dissolve Control168 0297
SP Dissolve Control102 9677
SP Pro
rammable Dissolve Control 816 7199
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
20
Editorial
The Quick Reference was created and published by Kodak AG, Germany. In case of any questions, requests, useful ideas, please get in direct contact with Kodak. The address is:
Kodak AG
PT CMS
Hedelfingerstr. 60
70327 Stuttgart
Germany
Phone: int +711 406 5151
Fax: int + 711 406 5367
E-mail: heinrich@kodak.com
Stuttgart, July 1998
by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65
Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors
21
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.