Kodak EASYSHARE 5300 User Manual

EasyShare 5300
All-in-One Printer
User’s Guide
for Windows
Eastman Kodak Company
Rochester, New York 14650
Kodak and EasyShare are trademarks of Eastman Kodak Company.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under license.
Wi-Fi® is a registered trademark of the Wi-Fi Alliance.
©1989-2007 I.R.I.S. (Image Recognition Integrated Systems), All Rights Reserved
P/N 1K2099
Table of Contents
Product Overview.................................................................................................................................... 1
Main Components.............................................................................................................................................. 1
Control Panel Layout......................................................................................................................................... 2
Status Lights........................................................................................................................................................ 3
LCD Display Screen........................................................................................................................................... 8
Memory Card Slots and USB Port .................................................................................................................9
Home Center Software.................................................................................................................................... 11
Getting Started ......................................................................................................................................13
Connect Power ..................................................................................................................................................13
Install the Printhead .........................................................................................................................................13
Install Ink Cartridges ........................................................................................................................................15
Install the Duplexer ......................................................................................................................................... 16
Startup .................................................................................................................................................................17
Menus ................................................................................................................................................................. 18
Demo Sheet........................................................................................................................................................21
Transfer Photos ................................................................................................................................................22
Printer Status ....................................................................................................................................................22
Configuring Settings........................................................................................................................................24
Handling and Loading Paper................................................................................................................ 31
The Scanner Glass ............................................................................................................................................31
Load Main Tray ................................................................................................................................................32
Load Photo Tray ...............................................................................................................................................34
Load Envelopes.................................................................................................................................................35
Load Labels........................................................................................................................................................36
Print ........................................................................................................................................................37
Print Photos from a Camera..........................................................................................................................38
Print Photos from the Control Panel ...........................................................................................................38
Index Print..........................................................................................................................................................39
Print Photos from a Proofsheet ................................................................................................................... 40
Tagged Photos (DPOF) ................................................................................................................................. 40
Bluetooth Printing ............................................................................................................................................ 41
Panoramic photos............................................................................................................................................42
Print with Computer........................................................................................................................................42
Layouts ...............................................................................................................................................................42
Setting Print Options.......................................................................................................................................57
Previewing Photos ........................................................................................................................................... 61
User’s Guide i
Table of Contents
Copy ....................................................................................................................................................... 65
Copy with Control Panel................................................................................................................................65
Copy with Computer ...................................................................................................................................... 73
Scan ........................................................................................................................................................ 77
Scan with Control Panel................................................................................................................................. 77
Scan with Computer .......................................................................................................................................80
Maintenance ....................................................................................................................................... 109
General Care...................................................................................................................................................109
Clean the Scanner Glass..............................................................................................................................109
Clean the Scanner Lid.................................................................................................................................... 110
Format Memory Card.................................................................................................................................... 110
Print Diagnostic Sheet................................................................................................................................... 110
Firmware Upgrade .......................................................................................................................................... 111
Ink Cartridges ................................................................................................................................................... 111
Printhead .......................................................................................................................................................... 114
Support ................................................................................................................................................. 119
Contact Kodak................................................................................................................................................. 119
Limited Warranty ........................................................................................................................................... 119
Telephone Customer Support......................................................................................................................121
Messages..........................................................................................................................................................123
Troubleshooting..............................................................................................................................................126
Appendix ..............................................................................................................................................137
Computer Requirements ..............................................................................................................................137
Paper Types .....................................................................................................................................................137
Safety.................................................................................................................................................................139
Regulatory Compliance................................................................................................................................140
Glossary................................................................................................................................................143
Index......................................................................................................................................................145
ii Kodak EasyShare 5300 AiO
1 Product Overview

Product Overview

The Kodak EasyShare 5300 All-in-One (AiO) Printer allows you to print, copy, and scan photos or documents. Many functions can be operated directly from the Control Panel. You can print, store, manage, and share your digital photos with family members and friends with the Kodak EasyShare software. You can buy optional accessories to enhance your Kodak EasyShare AiO experience.

Main Components

1 Scanner lid 10 Paper-length guide 2 LCD display 11 Main tray 3 Control panel 12 Output tray extender 4 Printer access door 13 Paper-width guide 5 Memory card indicator 14 Output tray 6 Memory card slots 15 Rear access door 7 USB port 16 Power connector 8 Photo tray Light 17 USB port 9 Photo tray
User’s Guide 1
Chapter 1

Control Panel Layout

Number Name Description
1
2
3
4 5
6 7 8 9
10
LCD display Displays photos, messages, status, and menus.
When in Photo Preview mode, magnifies the photo to 1.5X. Subsequent
+ button
Zoom
Proofsheet button
Transfer button Copy button Press to enter Copy mode. Lit when in Copy mode.
Photo button Press to enter Print mode. Lit when in Print mode. Help button Displays the Help menu. OK button Used for selection in conjunction with the 4-way Navigation button. On/Off button Turns your EasyShare AiO on or off.
On/Off Light
presses zoom in 0.5X increments to a maximum of 5X. When in Multiview, displays the current photo in preview mode.
When there are pictures on an inserted memory card or connected USB host device, pressing Proofsheet displays the Proofsheet menu.
Transfers images from device connected to a USB host port, PictBridge, or Picture Transfer Protocol (PTP).
Green when Starting Up, Ready, or in Standby mode. Flashes red when in an error state. Is not lit when in Sleep mode.
2 Kodak EasyShare 5300 AiO
Number Name Description
11 12 13
14
Attention Light On or flashing for an error or warning condition. Start button Starts a copy, print, or scan operation. Flashes when busy. Cancel button Cancels the current operation. Lit when Cancel or Setup in progress. 4-way Navigation
button
Used to navigate Up
Product Overview
a, Down b, Left _, and Right `.
15 16 17
18
Menu button Displays the main menu screen. Scan button Press to enter Scan mode. Lit when in Scan mode. Rotate button Rotates picture on the display, clockwise, 90 degrees.
When the EasyShare AiO is in Photo Preview mode, pressing enters
Zoom button
Multiview. When a photo has been magnified with the Zoom
decreases the magnification in 0.5X increments.
+ button, pressing

Status Lights

The following tables contain information on the EasyShare AiO lights.
All Lights on Control Panel
Light Status Cause Action/Solution
All lights are off.
The On/Off Light is flashing and the Display has the following message:
Kodak EasyShare System Starting Up (Please Wait) The five boxes at the bottom are
flash walking left to right.
The printer is turned off.
The Printer does not have power applied.
The Printer is Initializing.
Press the On/Off button to turn the printer on.
Check the light on the power cord.
None: Allow the Printer to complete the initialization process.
User’s Guide 3
Chapter 1
Power Light on Power Cord
Light Status Cause Action/Solution
Power cord light is off.
Power cord light is on.
The printer to power supply cord is not properly connected to the Power Supply.
The power supply to your wall outlet cord is not properly connected to your wall outlet.
You do not have the appropriate power available at your wall outlet.
There may be an issue with the power supply.
The power cord and power supply are properly connected and ready to supply power to the printer.
Reseat the printer to power supply cord.
Reseat the Power Supply to your Wall Outlet Cord.
Test your wall outlet by plugging a known working device into you wall outlet. Have your wall outlet checked by a qualified electrician.
Visit Kodak.com for additional troubleshooting steps or contact your local Kodak Call Center.
Ensure that the power cord is properly plugged into the back of the printer.
4 Kodak EasyShare 5300 AiO
On/Off Light
Light Status Cause Action/Solution
Light is off.
Light is a steady green.
Light is a flashing green.
Light is a flashing yellow.
Light is a flashing red.
Flashing a rotating pattern of red, yellow, and green.
The printer is turned off.
The Printer does not have power applied.
The printer needs attention.
The printer is properly powered up, on, and ready.
The printer is busy.
The printer is initializing.
The printer has detected an error condition.
The printer has detected an error condition that needs your attention.
The printer has not detected that a Printhead is installed.
Press the On/Off button to turn the printer on.
Check the light on the power cord.
Check to see if the Photo Tray light is on. If the Photo Tray light is on for more that 20 seconds and the On/Off light does not come on, disconnect the power for 5 seconds and reconnect the power. If the Photo Tray light does not go out after 20 seconds and the On/Off light comes on, contact Kodak for assistance.
None
None: Normal operation when performing a print, copy, scan, or other job requests.
None: Please wait and allow the printer to complete the initialization process (about 30 seconds). If the flashing green persists, you may have an issue with the printer. Visit Kodak.com for additional troubleshooting steps or contact your local Kodak Call Center.
Disconnect power for 5 seconds and reconnect power. If the condition persists, please check the LCD display for additional information. Contact Kodak service for assistance.
Also check the status monitor on your computer for a message.
Check the LCD display or status monitor on your computer for a message.
Please install a Printhead and ink cartridges.
Product Overview
User’s Guide 5
Chapter 1
Photo Tray Status Light
Light Status Cause Action/Solution
Photo tray light is Off.
Photo tray light is On.
The photo tray is not engaged.
The printer is not turned on.
The photo tray is engaged.
The printer is powering up.
Push the photo tray in to engage if you want to print 4 x 6 inch pictures.
Press the On/Off button to turn the printer on.
Pull the photo tray out to disengage if you do not want to print 4 x 6 inch pictures.
None: Please wait and allow the printer to complete the initialization process. If the flashing green persists, you may have an issue with the printer. Visit Kodak.com for additional troubleshooting steps or contact your local Kodak Call Center.
6 Kodak EasyShare 5300 AiO
Attention Light
Light Status Cause Action/Solution
Light is off. No Error. None Light is blinking steady. Recoverable Erro r.
Light is blinking rapidly. Warning
Light is on. Non-Recoverable Error
Paper jam while printing. Main tray empty. Photo tray empty. Carrier stall during pick. Media size mismatch. Media type mismatch. Paper jam during pick. Carrier stall while printing. Change color ink cartridge. Change black ink cartridge. Color ink cartridge not readable. Black ink cartridge not readable. Change both ink cartridges. Printhead not calibrated. Calibration sheet needs scanning. Calibration sheet not detected. Calibration sheet read error. Back cover removed when idle. Back cover removed while printing. Unit opened when idle. Unit opened during printing. Too many picture sources. Proofsheet not detected. Proofsheet read error.
Color ink cartridge inserted incorrectly. Black ink cartridge inserted incorrectly. Color ink cartridge not installed. Black ink cartridge not installed. Ink cartridges not installed. Printhead not installed.
Media sensor failure. Printhead failure. Scanner failure.
Product Overview
User’s Guide 7
Chapter 1
Card Slot Light
Light Status Cause Action/Solution
Light is off.
Light is on.
Light blinks green.
An SD/MMC card is not inserted or is improperly inserted in the card slot.
An SD/MMC card is properly inserted in the card slot.
Slow blink: The internal card reader is initializing or communicating with the printer.
Fast blink: There is a card or communication error.
Remove and reinsert the SD/MMC card.
None
None
Remove the card and make sure the card is not “write” protected or damaged. Reinsert the card or replace with a new card if necessary.

LCD Display Screen

The LCD screen displays photos, messages, instructions, and menu parameters. Menu navigation is accomplished with the 4-way Navigation buttons. The screen is hinged at the back edge and can be positioned from flat on the control panel surface to vertical.
Instructions displayed on photos appear up to four seconds and then disappear, or disappear immediately after you start interacting with the screen. The instructions will return after fifteen seconds of inactivity.
When a second page of display text is present, it is indicated by the down arrow
b symbol, positioned in
the lower right corner of the menu area. When the second or subsequent page of text is in view, the presence of a previous page is indicated by the up arrow
a symbol in the top of right corner of the menu
area.
Each time you press Navigate Down ( highlighted, pressing the top row. The up arrow available, the down arrow pressing Navigate Up (
b causes page 1 to be replaced with page 2. When page 2 appears, the highlight is on
a symbol appears at the right edge. If a third page of menu parameters is
b symbol appears in the lower right corner. Until the highlight is advanced,
a) returns you to the previous page. Holding down any of the 4-way Navigation
b), you advance the highlight down 1 row. When the last row is
buttons causes them to repeat (scroll).
8 Kodak EasyShare 5300 AiO
Product Overview

Default Display Settings

Default settings are provided for each option. If you make changes to the settings, the changes remain as long as you do not change modes. You can save the settings in each mode by navigating to Save Settings and pressing OK. You may reset options to the master defaults by going to the main menu and selecting Reset All Settings.

Photos

The LCD screen displays JPG images when you insert a memory card, camera, or USB device. However, the following images will not be displayed.
File size greater than 8 MB Image size greater than 12 megapixels Image colorspace is not sRGB or adobeRGB Progressive JPEG images

Memory Card Slots and USB Port

Your Kodak EasyShare All-in-One can access the memory cards used in most digital cameras. You can insert the memory card into the EasyShare AiO, or connect your camera directly through one of the two USB ports on the front panel, using a USB cable. Your Kodak EasyShare AiO can read the contents of the memory card while it is still in the camera.
If your EasyShare AiO beeps three times when you plug a device into the USB Port, it means the device is not supported.
User’s Guide 9
Chapter 1

Supported Memory Cards

Your Kodak EasyShare AiO can read the following memory cards.
xD-Picture Card Memory Stick Memory Stick Pro Secure Digital Card/MultiMediaCard Compact Flash type I and type II, including microdrives
Your EasyShare AiO also supports the following memory cards with Memory Stick and SD/MMC card slot adapters you can purchase.
Memory Stick Duo miniSD MicroSD (TransFlash)
The Memory Card light is a green LED located near the memory card slots. It lights whenever you insert a memory card, and flashes while the care is being read. The flashing serves as an indication to not remove the card while it is being read, or written to, which could potentially damage the data on the card.
10 Kodak EasyShare 5300 AiO
Product Overview

Home Center Software

The EasyShare AiO Home Center software is an application that runs on the computer. It enables you to copy, scan, and configure your EasyShare AiO from the computer. You can also launch Kodak EasyShare software for transferring, viewing, and working with your digital pictures/videos.
The six large icons on the AiO Home Center main window let you:
Scan Pictures and Documents Copy Pictures Print and Share Pictures
Configure Settings for Printing and Scanning.
Access My Resource Center at Kodak
Order Supplies
There are three small icons in the upper right corner of the window:
Displays the Status Monitor
Displays information about the Kodak AiO Home Center
Displays a Help panel for the Home Center software
User’s Guide 11
2 Getting Started

Getting Started

It is important to find a good location for your AiO Printer. Place the printer on a clean flat surface, in a dry location, and out of direct sunlight. Make sure the printer has proper ventilation.
Avoid areas where ventilation ducts, open doors, or high traffic might expose the EasyShare AiO and paper to high levels of dust and debris. Airborne particles can affect picture quality.
Allow enough space on all sides of the EasyShare AiO to let you connect and disconnect cables, change the ink cartridges, and remove and load paper.

Connect Power

RISK OF ELECTRICAL SHOCK Use only the AC power adapter included with your AiO printer. Other adapters or cords could damage your printer or computer.
1 Connect the printer power cord to the AC power adapter, then to the back of the AiO printer. 2 Plug the AC adapter power cord into a power outlet.

Install the Printhead

The printhead dispenses the ink from the cartridges onto the paper.
1 Make sure the EasyShare AiO is on. 2 Open the printer access door. The carriage moves to a center position.
User’s Guide 13
Chapter 2
3
Remove the printhead from its bag.
4 Remove and discard the clear plastic casing and the orange protective cap.
5 Place the printhead into the carriage.
6 Push against the back wall of the printhead until it clicks into place.
7 Install the ink cartridges.
14 Kodak EasyShare 5300 AiO

Install Ink Cartridges

After installing the printhead, you need to install the black and color ink cartridges.
1 Printhead 2 Color ink cartridge 3 Black ink cartridge
1 Tear open the black ink cartridge bag at the notch and remove the ink cartridge.
Getting Started
IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink.
2 Remove and discard the orange cap.
IMPORTANT: Handle ink cartridge carefully to avoid ink transfer.
3 Insert the black ink cartridge into the printhead.
User’s Guide 15
Chapter 2
4
Press down on the ink cartridge until you hear it snap into position.
5 Tear open the color ink cartridge bag at the notch and remove the ink cartridge.
6 Remove and discard the orange cap. 7 Insert the color ink cartridge into the printhead.
8 Press down firmly on the cartridge until you hear it snap into position.
9 Close the printer access door.
NOTE: For the best quality prints, store ink cartridges in a location where the temperature does not
exceed 85° F (30° C).

Install the Duplexer

The Kodak EasyShare AiO supports an optional duplexer (Kodak EasyShare 5000 Series Two-Sided Printing Accessory) that enables printing on both sides of the paper. When installed, the duplexer is automatically detected by the printer and computer system software.
The duplexer is limited to plain paper. The paper dimensions that can be used are from 6.9 to 8.5 inches (17.5 to 21.6 cm) wide and from 9.8 to 11.7 inches (24.9 to 29.7 cm) long.
You can purchase a duplexer and other accessories for your printer at
16 Kodak EasyShare 5300 AiO
www.kodak.com/go/accessories.
1
Remove the door on the back of the printer by pressing in on the two latches and pulling out.
2 Insert the bottom of the duplexer into the printer and press the top in until it clicks.
Getting Started
You can control how long the printer waits before a sheet is flipped by the duplexer with the AiO Home Center (See General Settings).

Startup

When you power on your Kodak EasyShare All-in-One, status information is displayed on the LCD. After the startup is complete, the EasyShare AiO enters the Copy mode, unless a photo device is attached. If a photo device is attached or memory card inserted, the EasyShare AiO enters Photo mode.
User’s Guide 17
Chapter 2

Menus

The Kodak EasyShare AiO menus are accessed by the Menu, Photo, Copy, Scan, and Help buttons.

Menu Button

Help
Photo Print Settings
Control Panel Settings
Ink Levels
OK
OK
OK
OK
Inserting Ink Cartridges Making a Copy
Printing a Photo Making a Scan Calibrating Printer Image Scaling
Fit to Page Use Print Order if Found
No Scene Balance
Off Add Date to Prints
Yes Button Sounds
Off Minutes to Standby
_ or `
_ or `
_ or `
_ or `
_ or `
_ or `
Fill Page
Yes
On
No
On
10-30
Proofsheet
Clean Printhead
Calibrate Printer
Format Memory Card
Print Demo Sheet
Print Diagnostic Sheet
18 Kodak EasyShare 5300 AiO
OK
OK
OK
OK
OK
OK
Print Proofsheet Scan Proofsheet Basic Clean Deep Clean Print Calibration Page Scan Calibration Page Formats inserted memory
card. Prints a demonstration
page. Prints a diagnostic page.
Getting Started
Date and Time
Language
Reset all Settings
OK
OK
OK

Photo Button

Layout Bordered
Quantity Color Black &
Quality Best
Save Settings Yes
_ or `
_ or ` _ or `
_ or `
_ or `
Borderless
2 per Page 3 per Page 4 per Page 9 per Page Index 2x2 Poster 3x3 Poster 4x4 Poster
1 - 99 Color
White Normal
Draft No
Year Month Day Hour Minute English
International English French German
_ or ` _ or ` _ or ` _ or ` _ or `
2006-2099 January-December 1-31 0-24 0-60
User’s Guide 19
Chapter 2

Copy Button

Quantity Color Color
Quality Draft
Output Fit to Page
Size 10 - 500
Brightness Preview Yes (Photo Layouts only)
Save Settings Yes
_ or ` _ or `
_ or `
_ or `
_ or `
_ or ` _ or `
_ or `
1 - 99 Black & White
Normal
Best Same Size
Scale Percent Photo Layouts
Output = Scale Percent
Output = Photo Layouts Borderless Bordered 2 per Page 3 per Page 4 per Page 9 per Page Index 2x2 Poster 3x3 Poster 4x4 Poster
-3 to +3 No
No
20 Kodak EasyShare 5300 AiO

Scan Button

Getting Started
Scan What Photo
Scan To Application
Application Save Settings Yes
_ or `
_ or `
_ or ` _ or `
Document
File
Memory Card
List of applications
No

Help Button

Installing Ink Cartridges
Making a Copy Making a Photo Making a Scan Calibrating
Printer
OK
OK OK OK OK

Demo Sheet

You can print a sample page on US Letter or A4 size paper to evaluate print quality. The Demo Sheet is a single sheet of paper that displays information about the features and capabilities of your EasyShare AiO printer.
You can print a Demo Sheet by pressing the Copy and Photo buttons at the same time.
or
1 Press Menu to display the main menu. 2 Press b until Print Demo Sheet is selected. 3 Press OK.
4 Press Start to begin printing.
User’s Guide 21
Chapter 2

Transfer Photos

After you take photos with your digital camera, you can print them immediately or save them directly to your computer. You can transfer from memory cards, PTP cameras, and USB mass storage devices.
1 Insert a Memory Card into the appropriate slot or connect a camera to the USB Port.
WARNING:
Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking.
2 Press Transfer. 3 Press Start to transfer. 4 Complete the transfer with the Transfer dialog on your computer.

Printer Status

The Status Monitor displays printer errors, warnings, operational statuses, ink levels, and printer response.
When printing from a PC, the application and name of the file printing are displayed.
Waiting to Print is displayed If a print job is started and your All-in-One is busy with another task.
When printing, a progress bar is displayed graphically showing the status of the print operation.
The percentage complete is displayed under the progress bar indicating the percentage of the print
operation complete.
The page number of the current page printing and the total number of pages in the print job is
displayed under the progress bar.
Photo paper tray: Status of the photo paper tray.
22 Kodak EasyShare 5300 AiO
Getting Started

Ink Levels

The Ink Level icons display the ink levels of the black and color ink tanks. The level shown for the color ink cartridge is the current lowest level for the five colors within the cartridge. Clicking on either icon displays the Ink Levels dialog box.
A Warning icon is displayed over the ink level icon when a low ink condition exists. A Critical icon is displayed over the ink level icon when an out of ink condition exists.
Click Order... to buy supplies from Kodak online.
Errors
If an error occurs, the Status Monitor displays an error message, error correction instructions, and a link to the Support section of the AiO Home Center Help.

Set Options for Status Monitor

An icon is present in the Status Notification area of the Taskbar when the Status Monitor is active.
If an error occurs, the icon changes appearance.
This menu is displayed when you right click on the icon.
The following options are displayed when you select Options in the menu.
Always display the Status Monitor
Only display the Status Monitor when an error occurs
User’s Guide 23
Chapter 2

Configuring Settings

You can configure settings for your Kodak EasyShare AiO using the Control Panel and the AiO Home Center software.

Image Scaling

There are two image scaling options.
Fill Page: The image is cropped or enlarged to completely fill the page. This is the default setting.
Fit to Page: The entire image is printed (no cropping). There may be white space on the sides or top/bottom depending on the difference in the aspect ratios of the image and the page size.
1 Press Menu to display the main menu. 2 Press b to select Photo Print Settings. 3 Press OK. 4 Press _ or ` to change the setting. 5 Press OK.

Use Print Order if Found

The Digital Print Order Format (DPOF) is an industry-standard file that can be created by some digital cameras. Camera-selected photos are photos you tag for printing with your digital camera. When you select photos with your camera, the camera creates a DPOF file that identifies which photos have been tagged for printing. Your Kodak EasyShare AiO can read the DPOF file from the memory card in a camera so you do not have to re-select the photos to print.
NOTE: Not all digital cameras allow you to tag your photos for printing. See your digital camera
documentation to see if it supports tagging (DPOF).
When you print tagged photos, the selected default layout is applied, unless your camera allows selection of sizes.
The DPOF file is stored by the digital camera on a memory card and specifies the following information:
Which photos to print
The quantity of each photo to print
Index printing (thumbnails of selected photos)
The default setting for using a detected DPOF file is Yes.
1 Press Menu to display the main menu. 2 Press b to select Photo Print Settings. 3 Press OK. 4 Press b to select Use Print Order if Found. 5 Press _ or ` to change the setting. 6 Press OK.
24 Kodak EasyShare 5300 AiO
Getting Started

Scene Balance

Your EasyShare AiO is configurable to apply automatic scene balance improvements (brightness) for photos printed on the AiO from camera cards and USB connected devices.. The default is to apply the scene balance improvements.
1 Press Menu to display the main menu. 2 Press b to select Photo Print Settings. 3 Press OK. 4 Press b until Scene Balance is selected. 5 Press _ or ` to enable or disable Scene Balance. 6 Press OK.

Add Date to Prints

You can set your EasyShare AiO to print the date a picture was taken on the photo print. The default is to not print the date.
1 Press Menu to display the main menu. 2 Press b to select Photo Print Settings. 3 Press OK. 4 Press b until Add Date to Prints is selected. 5 Press _ or ` to enable or disable date printing. 6 Press OK.

Button Sounds

You can configure your EasyShare AiO to emit an audio feedback beep when you press a button on the Control Panel. The default setting is to beep.
1 Press Menu to display the main menu. 2 Press b until Control Panel Settings is selected. 3 Press OK. 4 Press _ or ` to enable or disable button sounds. 5 Press OK.
User’s Guide 25
Chapter 2

Minutes to Standby

When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby state, any activity such as a single button press, or inserting camera card, brings the EasyShare AiO out of the Standby state and returns it to the Ready state.
You can set the standby timeout from 10 – 30 minutes. The default setting is 15 minutes.
1 Press Menu to display the main menu. 2 Press b until Control Panel Settings is selected. 3 Press OK. The Power Settings menu is displayed with Minutes to Standby selected. 4 Press _ or ` to change the standby timeout period. 5 Press OK.

Date and Time

Your Kodak EasyShare All-in-One contains a clock for stamping the date and time on scans to a memory card.
1 Press Menu to display the main menu.
2
Press b until Date and Time is selected.
3
Press OK to go to the Date and Time menu.
4
Press _ or ` to set the Year.
5
Press OK.
6
Press _ or ` to set the Month.
7
Press OK.
8
Press _ or ` to set the Day.
9
Press OK.
10
Press _ or ` to set the Hour.
11
Press OK.
12
Press _ or ` to set the Minute.
13
Press OK.
26 Kodak EasyShare 5300 AiO

Set Language

You can select the language the EasyShare AiO uses for the LCD display.
1 Press Menu to display the Main Menu. 2 Press b until Language is displayed. 3 Press OK to go to the Select Language menu. 4 Press b until the language you want is selected. 5 Press OK.

Reset All Settings

You can restore the original factory settings to your Kodak EasyShare All-in-One.
NOTE: Restoring the factory defaults will not change the date and time information you set.
1 Press Menu to display the Main Menu. 2 Press b until Reset All Settings is selected.
Getting Started
3 Press OK.
User’s Guide 27
Chapter 2

General Settings

You can specify general EasyShare AiO settings in the AiO Printer dialog.
Printer Date and Time
The EasyShare AiO date and time factory default is synchronized to the current computer. The date and time format is based on the language and country/region setting.
To enable or disable the date and time synchronization
1 On the main Home Center window, click Configure Settings to display the settings options.
28 Kodak EasyShare 5300 AiO
2
Click AiO Printer.
Getting Started
3 On the General tab, select or clear the Synchronize to this computer checkbox to enable or disable
date and time synchronization.
4 Click OK or Apply.
Power
You can set your EasyShare AiO to enter Standby mode after a timeout of 1 to 60 minutes.
To change the power settings
1 On the main Home Center window, click Configure Settings to display the settings options. 2 Click AiO Printer. 3 On the General tab, select a timeout values from the Standby drop-down list. 4 Click OK or Apply.
User’s Guide 29
Chapter 2
Printer
To change printer settings
1 On the main Home Center window, click Configure Settings to display the settings options. 2 Click AiO Printer. The EasyShare AiO dialog opens with the General tab selected. 3 On the General tab, change the following options as desired.
Audio feedback: When checked, a beep generated when you press a button on the Control Panel.
Language: Select the language the EasyShare AiO uses for the LCD display and printing diagnostic pages. The factory default is English.
Name: Your EasyShare AiO has a serial number that is used to construct name for Bluetooth printing. The default name is Kodak5300+XXXX, where XXXX represents the last four digits if the AiO printer's serial number. You can change this to a more user-friendly name by entering a new name in the edit box.
Duplexer ink dry time: Indicates how long to wait before a sheet is flipped by the optional duplexer.
4 Click OK or Apply.
30 Kodak EasyShare 5300 AiO
3 Handling and Loading Paper

Handling and Loading Paper

Use the following guidelines when handling paper.
To avoid fingerprints, handle the paper by the edges as much as possible. Avoid touching the glossy side of photo paper. Keep the input and 4x6 paper trays closed to keep out dust and debris. Store paper flat. Keep paper away from direct sunlight, and out of high-temperature environments (such as a vehicle
parked in the sun).
You can load many different types and sizes of paper in your Kodak EasyShare AiO, including letter paper, photo paper, transparencies, and envelopes (see Paper Types in the Appendix). The EasyShare AiO automatically detects the size and type of paper you load in the input tray, and then adjusts to generate the highest quality output for that paper.

The Scanner Glass

The scanner glass is where you place originals for copying or scanning.
1 Lift the lid and place your original face down on the right front corner of the scanner glass.
2 Close the lid.
User’s Guide 31
Chapter 3
You can copy or scan oversized originals by completely removing the lid from your EasyShare AiO. To remove the lid, lift the lid to the open position, grasp the sides of the lid, and then pull the lid upward.
Your EasyShare AiO functions normally with the lid removed. Replace the lid by inserting the tabs on the hinge back into the appropriate slots.

Load Main Tray

You can load the main paper tray with various types of paper from 3 to 8.5 inches wide and 5 to 14 inches long, with a capacity of 100 sheets of 20 lb plain paper (clean stack of new paper).
IMPORTANT: To print from the main paper tray, make sure the photo tray is not engaged, pulled all the
way out, and the lid closed.
1 Lift the output tray, and slide the paper-width and paper-length guides to their outermost positions.
2 Align the edges of a stack of paper. 3 Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide
the stack of paper forward until it stops.
4 Slide the paper-width and paper-length guides inward until they stop at the edges of the paper.
32 Kodak EasyShare 5300 AiO
5 Lower the output tray.
6 Pull the extender tray out.
Handling and Loading Paper
User’s Guide 33
Chapter 3

Load Photo Tray

You can load up to 20 sheets of 10 mil thick 4x6 inch (101x150 mm) photo paper into the photo tray.
TIP: To avoid fingerprints, handle the paper by the edges or by the perforated tabs. Avoid touching the
glossy side of the paper.
1 Lift the photo tray lid.
2 Slide the photo tray towards you until it stops.
NOTE: When the photo tray is disengaged, the main paper tray is active.
3 Insert the stack of photo paper into the photo tray glossy side down.
4 Slide the photo tray with the stack of photo paper in until it stops. Engaging the photo tray turns the
photo tray light on.
34 Kodak EasyShare 5300 AiO
Handling and Loading Paper
5
Close the photo tray lid.

Load Envelopes

You can load plain envelopes into the main input tray of your Kodak EasyShare AiO. Do not use envelopes with cutouts or cellophane windows.
1 Lift the output tray.
2 Remove any paper in the input tray. 3 Insert one or more envelopes face down with the envelope flaps to the left. 4 Slide the stack of envelopes forward until it stops.
5 Slide the paper guides inward against the stack of envelopes until they stop.
User’s Guide 35
Chapter 3
6
Close the output tray.

Load Labels

Use letter or A4 (designed for use with ink jet printers) label sheets.
1 Ensure that none of the pages are sticking together. 2 Place a stack of label sheets on top of standard paper in the input tray, label side down.
36 Kodak EasyShare 5300 AiO
4 Print

Print

The memory card slots accept most of the popular memory cards (see Supported Memory Cards). When you insert a memory card into the card slot, connect PTP camera, or USB flash drive, the first photo is displayed on the LCD display. When you press the Photo button the Photo Print menu is displayed. The Photo button toggles between displaying photos and the Photo Print menu.
CAUTION You can only use one device (USB or Memory card) from which to print. If both devices are engaged, the EasyShare AiO generates an error message.
When you print from an application, the EasyShare AiO printer driver provides the following features.
Non-photo Paper Print Quality
Draft Produces the fastest print speed, but the lowest quality.
Normal Delivers high-quality output and is the default setting. Normal prints faster than Best.
Best Produces the highest quality for all paper and eliminates the banding (striping) effect that
sometimes occurs in solid areas. Best is the slowest print speed.
Page Size
You can select a standard page size or create a custom size.
Borderless
Prints without any margin on the printed media.
Orientation
You can print a document with the short edge of the paper at the top of the page (portrait), or with the long edge of the paper at the top of the page (landscape).
Print last page first Causes printing to begin with the last page and end with the first page.
NOTE: There can be a delay when printing a large document while it is being spooled. Printing will begin
when the last page is spooled.
Collate
You can collate pages when printing multiple copies.
Scale Layout
You can scale pages or pictures by percentage or page size.
Multi-page Layout
The driver can reduce multiple pages so that they can all be printed on one sheet of paper.
Poster Layout
This function enlarges a picture, divides it into several pages, and prints each page on a separate sheet of paper. You can paste these sheets of paper together to create a poster.
Booklet Layout
The pages are distributed and printed on both sides of the paper and arranged is sequence. When they are folded in the middle and stapled they create a booklet.
Print Mirror Image
Flips the image for iron-on printing.
User’s Guide 37
Chapter 4
Two-sided Printing
You can print on both sides of the paper.
Watermark You can select or create a background watermark.

Print Photos from a Camera

1 Connect your camera to the EasyShare AiO. The PictBridge logo is displayed on the LCD.
2 Load the photo tray with photo paper (See Load Photo Tray in Chapter 3). 3 Use your camera to select and print photos.

Print Photos from the Control Panel

The Photo Print mode is initiated by pressing the Photo button, inserting a memory card, or connecting a USB device to the Kodak EasyShare All-in-One.
1 Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a
digital camera to the USB port. The last photo is displayed.
WARNING
Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking.
2 Load the main tray (see Load Main Tray in Chapter 3) or photo tray (See Load Photo Tray in Chapter 3)
with photo paper.
NOTE: The Photo Tray only supports 4x6 inch and 100x150 mm photo paper.
3 Press a to select the number of prints for this photo. 4 Press ` to preview the next photo.
TIP: To select all the photos on a memory card or mass storage device, hold down the OK button for 2
seconds. Holding down the OK button again for 2 seconds will de-select all the photos.
5 Repeat Steps 3 and 4 until you are finished selecting photos. 6 Press Start to print the selected photos or Photo to set print options. 7 Set print options.
See Set Print Layout
See Set Number of Prints
See Set Color
See Set Print Quality
After a photo is printed, it is de-selected.
38 Kodak EasyShare 5300 AiO
Print

Index Print

The purpose of an index print is to catalog contents of a memory card or USB flash drive. An Index print contains the following:
Sequence numbers for the relative position of each photo within the defined set of photos,
incrementing from 001 and continuing progressively across all pages of a multi-page index print.
8x10 Index prints are 7/8 inches wide with 1/8 inch white space between photos. The filename is
displayed below each thumbnail image.
4x6 index prints are 3/4 inch wide with 1/8 inch white space between images. The filename is
displayed below each thumbnail image.
1 Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a
digital camera to the USB port. The first photo is displayed.
WARNING
Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking.
2 Load the main tray (see Load Main Tray in Chapter 3) or photo tray (See Load Photo Tray in Chapter 3)
with photo paper.
NOTE: The Photo Tray only supports 4x6 inch and 100x150 mm photo paper.
3 Press Photo. The Print menu is displayed with Layout selected. 4 Press the _ or ` to select Index. 5 Press Start.
User’s Guide 39
Chapter 4

Print Photos from a Proofsheet

A proofsheet is a simple and convenient way to select photos and make prints directly from a camera or memory card without the need for a computer.
Proofsheet printing is a two step process. In the first step, you connect a PTP camera or insert a memory card and print a proofsheet. In the second step, you select pictures to print from the proofsheet and then scan the proofsheet into the EasyShare AiO.
IMPORTANT: If the AiO printer goes into standby mode, power is lost, or you unplug the memory card,
camera, or USB device before you scan the proofsheet, the proofsheet session number becomes invalid and you will need to re-print it.
1 Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a
digital camera to the USB port. The first photo is displayed.
WARNING
Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking.
2 Load the main tray (see Load Main Tray in Chapter 3) with letter size plain paper. 3 Press Menu. 4 Press b until Proofsheet is selected. 5 Press OK. 6 Press Start to print the proofsheet. 7 Complete the four steps on the proofsheet with the memory card, storage device, or camera connected.

Tagged Photos (DPOF)

The Digital Print Order Format (DPOF) is an industry-standard file that can be created by some digital cameras. Camera-selected photos are photos you tag for printing with your digital camera. When you select photos with your camera, the camera creates a DPOF file that identifies which photos have been tagged for printing. Your Kodak EasyShare AiO can read the DPOF file from the memory card in a camera so you do not have to re-select the photos to print.
NOTE: Not all digital cameras allow you to tag your photos for printing. See your digital camera
documentation to see if it supports tagging (DPOF).
When you print tagged photos, the selected default layout is applied, unless your camera allows selection of sizes.
The DPOF file is stored by the digital camera on a memory card and specifies the following information:
Which photos to print
The quantity of each photo to print
Rotation applied to a photo
Cropping applied to a photo
Index printing (thumbnails of selected photos)
40 Kodak EasyShare 5300 AiO
Print
If a DPOF file is detected when you insert a memory card, the EasyShare AiO displays a message asking if you want to print tagged images.

Bluetooth Printing

Bluetooth is a short-range radio technology that enables wireless connectivity between electronic devices. This feature supports an optional Kodak USB Bluetooth Adapter that accepts JPEG/EXIF image file types from the following types of Bluetooth enabled devices.
Mobile camera phones
PDAs
Digital still cameras
You can purchase a Bluetooth Adapter directly from Kodak at
To enable Bluetooth wireless connectivity, plug your Kodak Bluetooth Adapter into the front USB port.
NOTE: Your EasyShare AiO supports connection to only one Bluetooth device at a time and has an 8MB
file size limitation.
www.kodak.com/go/accessories.

Range

The recommended maximum distance between Bluetooth devices for the highest transfer speed is 10 meters or 32.81 feet. However, Bluetooth will work beyond this distance.

User-friendly Name

Your EasyShare AiO has a serial number that is used to construct name for Bluetooth printing. The default name is Kodak5300+XXXX, where XXXX represents the last four digits if the AiO printer's serial number. You can change this to a more user-friendly name with the AiO Home Center (See General Settings in Chapter 2).

Printing

When a Bluetooth connection is made, no other functions are available, and the LCD display indicates printing from Bluetooth. You control printing from your Bluetooth device.
User’s Guide 41
Chapter 4

Panoramic photos

Panoramic images are detected based on the aspect ratio of the image. A panoramic image is displayed in a "fit to page" manner with blank space above and below the image. The crop box is adjusted for a 300 x 100 mm (12 x 4") aspect ratio and initially encompasses the entire image.
If panoramic images are selected for printing, the AiO printer prints all of the panoramic images after all other images have printed. Before printing the panoramic images, the EasyShare AiO displays a message to allow you to insert panoramic paper then press Start again to print the panoramic images.

Print with Computer

You can print from any application that has a Print command in the File menu.
You can also print from Kodak EasyShare software (when installed). Kodak EasyShare software lets you take advantage of a wide range of features, including editing, printing options, and picture organization.
1 Click Print and Share Pictures EasyShare. 2 Make sure the My Collection tab is selected. 3 Select an album under My Albums. 4 Select the pictures you wish to print and drag them to the Picture tray. 5 Click the Print at Home tab. 6 Make sure the current printer is set to the EasyShare AiO (Click Printer Setup). 7 Change any other settings, such as paper size and print layout, then click Print.

Layouts

The photo layouts on your Kodak EasyShare AiO “snap” to the nearest standard print size whenever possible based on the combination of layout and paper size loaded. Otherwise the layouts are based on a standard 2x3 aspect ratio. The table below shows the print sizes that result from the various layouts when applied to US Letter size paper (8.5 X 11 in).
Layout A Paper Print Size
Borderless 8.5x11” Bordered 8x10” 2 per Page 5x7” 3 per Page 4x6” 4 per Page 3.5x5” 9 per Page 2.5x3.25 (wallet)
In addition to US Letter size paper, your EasyShare AiO provides photo layout support the following of US and ISO 216 paper sizes. US sizes are measured in inches and ISO 216 sizes are based on the metric system.
42 Kodak EasyShare 5300 AiO
US photo paper sizes
3.5 X 5 inches
4 X 6 inches
5 X 7 inches
8 X 10 inches
ISO 216 paper sizes
A4 (21 X 30 centimeters)
A5 (15 X 21 centimeters)
A6 (10 X 15 centimeters)
B5 (17.6 X 25 centimeters)
The international paper size standard, ISO 216, consists of an A series and a less common B series. This standard has been adopted by all countries in the world except the United States and Canada. The most widely used size in the ISO format is A4.
The charts on the following pages compare the most common paper sizes.
Print
User’s Guide 43
Chapter 4
44 Kodak EasyShare 5300 AiO
Print

Set Print Layout

1 Press Photo. The Print menu is displayed with Layout selected. 2 Press _ or ` to change the print layout. 3 Press OK to set the selected layout and continue to set options, press Photo to preview, or Start to
print.
User’s Guide 45
Chapter 4

3.5x5 Inch Paper

1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
46 Kodak EasyShare 5300 AiO

4x6 Inch Paper

Print
1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
User’s Guide 47
Chapter 4

5x7 Inch Paper

1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
48 Kodak EasyShare 5300 AiO

8x10 Inch Paper

Print
1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
User’s Guide 49
Chapter 4

US Letter

1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
50 Kodak EasyShare 5300 AiO
Print
Panoramic
User’s Guide 51
Chapter 4

A4 Paper

1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
52 Kodak EasyShare 5300 AiO

A5 Paper

Print
1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
User’s Guide 53
Chapter 4

A6 Paper

1 per page borderless
3 per page
1 per page bordered
4 per page
2 per page
9 per page
54 Kodak EasyShare 5300 AiO

B5 Paper

Print
1 per page borderless
3 per page

Index Sheet

1 per page bordered
4 per page
2 per page
9 per page
The Index Sheet layout shows thumbnail images, filenames, and sequence numbers of each photo on a memory card. It also prints a date range and the sequence numbers continue incrementing across multiple pages. Index pages can be printed on US Letter/A4 paper or 4x6 paper.
User’s Guide 55
Chapter 4
US Letter/A4 Index Sheet
56 Kodak EasyShare 5300 AiO
4x6 Index Sheet
Print

Setting Print Options

Before you print photos you may want to change the following default settings.
Layout: Borderless Quantity: 1 print Color: Color print Quality: Normal Save Settings: No
The Photo Print menu contains parameters that allow you to specify other options.

Set Number of Prints

You can increase the number of prints of each photo from the Photo Print menu. The default is 1 print.
1 On the Print menu, select Quantity. 2 Press _ or ` to change the print quantity. 3 Press OK to set the selected layout and continue to set options, press Photo to preview, or Start to
print.
User’s Guide 57
Chapter 4

Set Color

You can print in color or black-and-white. Printing in color is the default.
1 On the Print menu, select Color. 2 Press _ or ` to change the print color. 3 Press OK to set the selected layout and continue to set options, press Photo to preview, or Start to
print.

Set Print Quality

The Kodak EasyShare All-in-One provides three options that affect print speed and quality for plain paper. Print quality is automatically set to Kodak Picture Quality when photo paper is detected.
Draft Produces the fastest print speed, but the lowest quality.
Normal Delivers high-quality output and is the default setting. Normal prints faster than Best.
Best Produces the highest quality for all paper and eliminates the banding (striping) effect that
sometimes occurs in solid areas. Best is the slowest print speed.
1 On the Print menu, select Quality. 2 Press _ or ` to change the print quality. 3 Press OK to set the selected layout and continue to set options, press Photo to preview, or Start to
print.

Save Settings

When you change print settings from the control panel, the settings apply only to the current print job. To apply print settings to all future print jobs, you can save the changes you make.
1 On the Print menu, select Save Settings. 2 Press _ or ` to set to Yes. 3 Press Photo to preview, or Start to print.

Print Settings

You can set print options for printing from the control panel with the Home Center software. When printing from a computer, use the printer driver preferences to set options.
58 Kodak EasyShare 5300 AiO
Print Quality
Kodak picture quality is automatically selected when photo paper is detected in the main or photo input trays.
The following print quality options are available for printing on plain paper.
Draft Produces the fastest print speed, but the lowest quality.
Normal Delivers high-quality output and is the default setting. Normal prints faster than Best.
Best Produces the highest quality for all paper and eliminates the banding (striping) effect that
sometimes occurs in solid areas. Best is the slowest print speed.
To set output quality for non-photo paper
1 On the main Home Center window, click Configure Settings to display the settings options.
Print
2 Click AiO Printer to open the EasyShare AiO dialog.
User’s Guide 59
Chapter 4
3
Click the Print tab.
4 Select Draft, Normal, or Best. 5 Click OK or Apply.
Print Options
The photo layouts on your Kodak EasyShare AiO “snap” to the nearest standard print size based on the combination of layout and paper size loaded whenever possible. Otherwise the layouts are based on a standard 2x3 aspect ratio.
To set print options
1 On the main Home Center window, click Configure Settings to display the settings options. 2 Click AiO Printer to open the EasyShare AiO dialog. 3 Click the Print tab. 4 Set the following print options as desired.
Layout: The photo layouts on your Kodak EasyShare AiO “snap” to the nearest standard print size based on the combination of layout and paper size loaded whenever possible. Otherwise the layouts are based on a standard 2x3 aspect ratio.
Print date on front: Select to print todays date on the front of the picture.
Quantity: Select the number to print from the drop-down list.
Print colors as grayscale: Printing a color photo in grayscale makes it look like a traditional black-and­white photograph. The grayscale palette contains white, black, and 254 shades of grey. Each color in the image is replaced with a gray that matches its lightness value.
5 Click OK or Apply.
60 Kodak EasyShare 5300 AiO
Advanced
Scene balance is the ability to adjust the color and density of digital images for brighter color and truer flesh tones.
You can set your EasyShare AiO to prompt you for print options whenever a tagged picture is detected.
To set advanced options
1 On the main Home Center window, click Configure Settings to display the settings options. 2 Click AiO Printer to open the EasyShare AiO dialog. 3 Click the Print tab. 4 Set the following advanced print options as desired.
Automatically apply screen balance to digital camera pictures: Scene balance is the ability to adjust the color and density of digital images for brighter color and truer flesh tones.
Enable printing of tagged pictures: Enables the Kodak EasyShare AiO to detect tagged photo files (DPOF) and prompt you for options.
5 Click OK or Apply.
Print

Previewing Photos

The Print Preview screen contains a crop box, displays the current photo number on the card or USB host device, and the total number of photos on the card or device. It displays a checkbox indicating whether or not the currently displayed photo has been selected for printing. A checkmark is placed in the checkbox when the photo is selected along with the number of copies to be printed. All photos selected are given the number of copies specified in the Quantity parameter on the Print menu by default. For example, if the Quantity parameter is set to 2, all selected photos are initially be given a number-to-print value of 2.
Additionally, the Print Preview screen displays an icon of a printer and the total number of photos to be printed. For example if you select two photos, each set to print 2 copies, the number next to the printer icon will be 4.
For every card/USB host session, a message is displayed the first time a photo is displayed instructing you to press
For every card/USB host session, a message is displayed the first time you select a photo for printing, instructing you to use

Preview Mode

Preview mode allows you to select and edit photos for printing. If you press the Start button while in Preview mode, all the selected photos are printed. If there are no photos selected, then the photo displayed is printed. Print preview mode is entered when you insert a memory card, connect a camera or mass storage device, or from Print mode by pressing Photo.
_ and ` to view the photos and to press OK to select the photo for printing.
a and _ to change the number of photos to print.
The Preview screen displays the current photo inside a crop box. The crop box aspect ratio is 1.4:1.
At the bottom of the screen, the current photo number on the card or USB host device, and the total number of photos is displayed. A checkbox indicates whether or not the currently displayed photo has been selected for printing. A checkmark is displayed in the checkbox if the photo has been selected along
User’s Guide 61
Chapter 4
with the number of copies to be printed to the left of the checkbox. All photos selected are given the number of copies specified in the Quantity parameter on the Print menu by default. For example, if the Quantity parameter is set to 2, all selected photos are initially given a number-to-print value of 2.
Additionally, the Print Preview screen displays an icon of a printer and the total number of photos to be printed. For example if you select 2 photos, each set to print 2 copies, the number next to the printer icon will be 4.
IMPORTANT: Crop, zoom, and quantity are per image, but layout is global, applying to all images.

Zoom Photos

1 Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a
digital camera to the USB port. The first photo is displayed.
2 Press Zoom + to enlarge the photo in .25X increments up to 5X magnification. Pressing Zoom –
decreases magnification in .25X increments down to 1X.
3 Use the 4-way Navigation button to display the part of the picture you want to print.
62 Kodak EasyShare 5300 AiO
4
Press OK when finished. The photo is displayed with a crop box around the magnification and position
you selected.
5 Press to select the number of prints, and press Start to print the area displayed in the crop box.

Multiview

The Multiview screen shows thumbnails of nine photos. The current photo number and the total photo number are also displayed.
1 Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a
digital camera to the USB port. The last photo is displayed.
Print
2 Press Zoom - to enter Multiview. The current photo is indicated by a red selection box.
3 Use the 4-way Navigation button to move the red selection box to another photo. Pressing ` when in
the rightmost column displays the next Multiview screen. Pressing
_ when in the leftmost column
displays the previous Multiview screen.
User’s Guide 63
Chapter 4
4
Press OK to preview the selected photo
5 Press Start to print.
64 Kodak EasyShare 5300 AiO
5 Copy

Copy

The Kodak EasyShare AiO allows you to produce high-quality color and black-and-white copies on a variety of paper types, including transparencies. Once copying has started, you may at any time abort a copy operation by pressing the Cancel button.

Copy with Control Panel

Pressing Copy displays the copy menu where you can set copy options, preview copies after scanning, and make copies.
When copying from the Control Panel, you can choose from the following outputs.
Same Size: The copy is the same size as the original. Cropping will occur if the original is larger than the paper size. The copy will contain white space if the original is smaller than the paper size. Same Size is the default copy setting.
Fit to Page: The image is copied and fit to the paper size loaded. There may be cropping on the sides or top/bottom depending on the difference in the aspect ratios of the image and the page size.
Scale Percent: The default copy scale is 100%, however you can scale copies from 10% to 500%. Scaling is anchored to the upper left corner of the original.
Photo Layouts: You can set the layout for making copies of photos on your Kodak EasyShare All-in-One. The following layouts are supported.
Borderless (default)
Bordered
2 per Page
3 per Page
4 per Page
9 per Page
2x2 Poster
3x3 Poster
4x4 Poster
User’s Guide 65
Chapter 5

Same Size Copy

The copy is the same size as the original and is the default copy setting. Cropping will occur if the original is larger than the paper size. The copy will contain white space if the original is smaller than the paper size.
1 Load your original face down on the right front corner of the scanner glass.
2 Press Copy to display the Copy menu. 3 Press b to select Output. 4 Press _ or ` to select Same Size. 5 If desired, make changes to the following copy options with the Copy menu.
See Set Number of Copies
See Set Color
See Set Quality
See Change Brightness
See Set Preview
6 Press Start. If you turned preview on, the EasyShare AiO enters Preview mode, otherwise it starts
making copies.
66 Kodak EasyShare 5300 AiO

Fit to Page Copy

The image is copied and fit to the paper size loaded. There may be cropping on the sides or top/bottom depending on the difference in the aspect ratios of the image and the page size.
1 Place your original face down on the right front corner of the scanner glass.
2 Press Copy to display the Copy menu. 3 Press b to select Output.
Copy
4 Press _ or ` to select Fit to Page. 5 If desired, make changes to the following copy options with the Copy menu.
See Set Number of Copies
See Set Color
See Set Quality
See Change Brightness
See Set Preview
6 Press Start. If you turned preview on, the EasyShare AiO enters Preview mode, otherwise it starts
making copies.
User’s Guide 67
Chapter 5

Scale Percent Copy

The default copy scale is 100%, however you can scale copies from 10% to 500%. Scaling is anchored to the upper left corner of the original.
1 Place your original face down on the right front corner of the scanner glass.
2 Press Copy to display the Copy menu. 3 Press b to select Output. 4 Press _ or ` to select Scale Percent. 5 Press b to select Size. 6 Press _ or ` to change the scaling. 7 If desired, make changes to the following copy options with the Copy menu.
See Set Number of Copies
See Set Color
See Set Quality
See Change Brightness
See Set Preview
8 Press Start. If you turned preview on, the EasyShare AiO enters Preview mode, otherwise it starts
making copies.
68 Kodak EasyShare 5300 AiO

Photo Layout Copy

You can set the layout for making copies of photos on your Kodak EasyShare All-in-One. The following layouts are supported.
Borderless (default)
Bordered
2 per Page
3 per Page
4 per Page
9 per Page
2x2 Poster
3x3 Poster
4x4 Poster
1 Place your original face down on the right front corner of the scanner glass.
Copy
2 Press Copy to display the Copy menu. 3 Press b to select Output. 4 Press _ or ` to select Photo Layouts. 5 Press b to select Size. 6 Press _ or ` to change the layout. 7 If desired, make changes to the following copy options with the Copy menu.
See Set Number of Copies
See Set Quality
See Change Brightness
See Set Preview
8 Press Start. If you turned preview on, the EasyShare AiO enters Preview mode, otherwise it starts
making copies.
User’s Guide 69
Chapter 5

Setting Copy Options

You can set the following copy options with the Control Panel Copy menu.
Quantity
Color
Quality
Output/Size (See Same Size Copy, Fit to Page Copy, Scale Percent Copy, or Photo Layout Copy)
Brightness
Preview
Save Settings
Set Number of Copies
You can set the number of copies to make from the copy menu. The default is 1 copy.
1 On the Copy menu, select Quantity. 2 Press or hold _ or ` to change the number of copies you want to make. 3 Press OK to set and continue setting options, or Start to copy.
Set Color
You can make copies if documents in color or black-and-white. The default is color.
1 On the Copy menu, press b to select Color. 2 Press _ or ` to change the copy color. 3 Press OK to set and continue setting options, or Start to copy.
Set Quality
Kodak picture quality is automatically selected when photo paper is detected in the main or photo input trays.
The Kodak EasyShare All-in-One provides three options that affect speed and quality for copying documents to plain paper.
Best Produces the highest quality for all paper and eliminates the banding (striping) effect that
sometimes occurs in solid areas.
Normal Delivers high-quality output and is the default setting. Normal copies faster than Best.
Draft Produces the fastest copy speed, but the lowest quality.
1 On the Copy menu, press b until Quality is selected. 2 Press _ or ` to change the copy quality. 3 Press OK to set and continue setting options, or Start to copy.
70 Kodak EasyShare 5300 AiO
Copy
Change Brightness
You can change the brightness of copies with -3 being the darkest and +3 the lightest.
1 If the Copy menu is not displayed, press Copy. 2 Press b until Brightness is selected. 3 Press _ to darken or ` to lighten. 4 Press OK to set and continue setting options, or Start to copy.
Set Preview
Copy Preview allows you to preview your originals before making copies. The Copy Preview screen shows the scanned image that you can zoom or crop (see Zoom and Crop).
1 On the Copy menu, press b until Preview is selected. 2 Press _ or ` to enable or disable Preview. 3 Press OK to set and continue setting options, or Start to copy.
Save Copy Settings
When you change copy settings from the control panel, the settings apply only to the current copy job. To apply copy settings to all future copy jobs, you can save the setting changes.
1 If the Copy menu is not displayed, press Copy. 2 Press b until Save Settings is selected. 3 Press _ or ` to set save copy settings to Yes.

Previewing Copies

Previewing Copies
Copy Preview mode is entered when the following conditions exist.
The EasyShare AiO is in Copy mode.
Preview is set to Yes.
The Start button is pressed.
The Copy Preview feature can be used for photos or documents.
User’s Guide 71
Chapter 5
Zoom and Crop
To zoom and crop a photo before making a copy you must be in Preview mode (see Turning Copy Preview On).
1 With Preview set to Yes on the Copy menu, press Start to enter Preview mode. The photo on the glass
is scanned and displayed with a crop box.
2 Press Zoom + to enlarge the photo in .25X increments up to 5X magnification. Pressing Zoom –
decreases magnification in .25X increments down to 1X.
3 Use the 4-way Navigation button to display the part of the picture you want to copy.
4 Press OK or Start to copy.
72 Kodak EasyShare 5300 AiO
Copy

Copy with Computer

You can make copies of pictures on your Kodak EasyShare AiO with Home Center Software.

Copy Pictures

Copying pictures with the AiO Home Center allows you to set copy options not available on the Control Panel.
To copy pictures
1
Place your original photo photos face down in the scanner glass.
2
On the main Home Center window, click Copy Pictures to open the Basic Copy window.
3
Click Go to Advanced to open the Advanced Copy window.
User’s Guide 73
Chapter 5
4
Select an output type from the Select photo output drop-down list.
4x6 Copy: Print individual borderless 4" x 6" copy(s) of each picture on the scanner glass.
8x10 Copy: Print individual borderless 8" x 10" copy(s) of each picture on the scanner glass.
8.5x11 Copy: Print individual borderless 8.5" x 11" copy(s) of each picture on the scanner glass.
Exact Copy: Print individual, exact size copy(s) of each picture on the scanner glass.
Collage Copy: Copy picture(s) exactly as placed on the scanner glass.
Color Restored Copy: Restores color from faded pictures.
5
Select Color or Black and White.
6
Set the following copy options as desired.
Resolution: Choose the Resolution from the drop-down list you want to use for the copy. Use 300 dpi when the print size selected is Original. Use a higher resolution when the print size is larger than the original, and a lower resolution when the print size is smaller than the original.
Copy as individual pictures: Copies all pictures on scanner glass to separate she ets of photo paper. When this check box is not selected, the entire scanner glass is copied.
Color restoration: Select to restore color on old faded photos.
Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail.
NOTE: Color restoration and Kodak Perfect Touch can be used together to enhance pictures.
Paper size: Select the paper size loaded. The default selection is Current Tray. When the Photo Tray is engaged, it becomes the current tray. When the Photo Tray is not engaged, the Main Tray is the current tray.
Print size: Select the size you want printed when making a copy to the Main Tray. Borderless: Select to output a print with no border.
Paper saver: This feature automatically lays out your photos using the least amount of space so less paper is wasted when you cut out the photos. The pictures on the scanner glass are un-skewed and printed on the same sheet of paper. This checkbox is disabled when the photo tray is engaged.
Copies: Select the number of copies to make of the original.
7
If desired, click to save the options you selected as a shortcut.
8
If desired, click Preview > to preview the scanned photos.
9
Click Copy Now to start the copy. The picture(s) are scanned and copy progress information appears that shows the progress of the copy.

Copy Settings

The copy settings on this tab affect making copies from the control panel. The settings you make or shortcut you select on the Copy Pictures window controls the copies you make from the Home Center (see Copy Pictures).
74 Kodak EasyShare 5300 AiO
Copy
Output Quality
Kodak picture quality is automatically selected when photo paper is detected in the main or photo input trays.
The following print quality options are available for printing on non-photo paper.
Draft Produces the lowest quality, but the fastest copy speed.
Normal Delivers high-quality output and is the default setting. Normal copies faster than Best.
Best Produces the highest quality for all paper and eliminates the banding (striping) effect that
sometimes occurs in solid areas. Best is the slowest copy speed.
To set output quality for non-photo paper
1 On the main Home Center window, click Configure Settings to display the settings options.
2 Click AiO Printer to open the AiO Printer dialog.
User’s Guide 75
Chapter 5
3
Click the Copy tab.
5 Select Draft, Normal, or Best. 6 Click OK or Apply.
Copy Options
1 On the main Home Center window, click Configure Settings to display the settings options. 2 Click AiO Printer to open the AiO Printer dialog. 3 Click the Copy tab. 4 Set the following options as desired.
Output: Select Same Size, Fit to Page, Scale Percentage, or Photo Layouts from the drop-down list.
Size: Enabled when you select Scale Percentage in the Output drop-down list. Use this drop-down list to set the percentage you want to scale your copies.
Layout: Enabled when you select Photo Layouts from the Output pop-up list. Select your preferred layout to print one of more photos on the size paper loaded (see Layouts).
Brightness: Use the slide-bar to increase or decrease the brightness of copies.
Quantity: Sets the default number of copies to the value you select.
Print colors as grayscale: Copying a color photo in grayscale makes it look like a traditional black­and-white photograph. The grayscale palette contains white, black, and 254 shades of grey. Each color in the image is replaced with a gray that matches its lightness value.
5 Click OK or Apply.
76 Kodak EasyShare 5300 AiO
6 Scan

Scan

You can start a scan from the Kodak AiO Control Panel or your computer.

Scan with Control Panel

Pressing Scan places the Kodak EasyShare AiO in Scan mode and displays the Scan menu on the screen.

Save Scan Settings

When you change scan settings from the control panel, the settings apply only to the current scan job. To apply scan settings to all future scan jobs, you can save your changes.
1 Press Scan to display the Scan menu. 2 Change the desired Scan settings. 3 Press b until Save Settings is selected.
4 Press _ or ` to set save scan settings to Yes.

Scanning Photos

With the Control Panel Scan menu, you can scan photos to a file, application, or memory card.
Scan to File
1 Place a photo or photos face down on the scanner glass. 2 Press Scan to display the Scan menu. 3 Press _ or ` to select Photo.
4 Press b until Scan To is selected. 5 Press _ or ` to select File. 6 Press Start.
The document is scanned and saved based on the Kodak AiO Home Center scan picture settings (see Scan Picture Settings).
User’s Guide 77
Chapter 6
Scan to Application
The Home Center software enables you to maintain a list of scan destination applications.
1
Place a photo or photos face down on the scanner glass.
2
Press Scan to display the Scan menu.
3
Press _ or ` to select Photo.
4
Press b to select Scan To.
5
Press ` to select Application.
6
Press b to until Application is selected.
7
Press _ or ` to select another application.
8
Press Start.
Scan to Memory Card
1 Insert a Memory Card into the appropriate card slot.
WARNING:
Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking.
2 Place a photo or photos face down on the scanner glass. 3 Press Scan to display the Scan menu. 4 Press _ or ` to select Photo.
5 Press b to select Scan To. 6 Press _ or ` to select Memory Card. 7 Press Start.

Scanning Documents

With the Control Panel Scan menu, you can scan documents to a file, application, or memory card.
78 Kodak EasyShare 5300 AiO
Scan
Scan to File
1 Load your original face down on the right front corner of the scanner glass.
2 Press Scan to display the Scan menu. 3 Press _ or ` to select Document. 4 Press Start.
The document is scanned and saved based on the Kodak AiO Home Center scan document settings (see Scan Document Settings).
Scan to Application
1
Load your original face down on the right front corner of the scanner glass.
2
Press Scan to display the Scan menu.
3
Press _ or ` to select Document.
4
Press b to select Scan To.
5
Press _ or ` to select Application.
6
Press b to until Application is selected.
7
Press _ or ` to select another application.
8
Press Start.
User’s Guide 79
Chapter 6
Scan to Memory Card
1 Insert a Memory Card into the appropriate card slot.
WARNING:
Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking.
2 Load your original face down on the right front corner of the scanner glass.
3 Press Scan to display the Scan menu. 4 Press _ or ` to select Document. 5 Press b to select Scan To. 6 Press _ or ` to select Memory Card. 7 Press Start.

Scan with Computer

Scanning is the process of converting text and pictures into an electronic format for your computer. The Scan mode becomes active when you click Scan Pictures and Documents. The Scan status light is always on when the EasyShare AiO is in Scan mode. After loading your original onto the scanner glass, you click Scan Now to initiate a scan operation. If you select Color, the EasyShare AiO performs a color scan. If you select Grayscale or Black & White, then the EasyShare AiO scans for black and white with grayscale. The Scan status light blinks during data transfer.
To use the scan features, your EasyShare AiO and computer must be connected and turned on. The Kodak AiO Home Center software must also be installed and running on your computer prior to scanning.

Scanning Pictures

The AiO Home Center software allows you to scan pictures to a file or an application.
Scan to File
1
Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos.
2
On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
80 Kodak EasyShare 5300 AiO
3
Click Go to Advanced to open the Advanced Scan window.
4
Select Picture.
Scan
5
Select Color or Black & White.
6
If desired, set the following options.
Resolution: Choose the Resolution from the drop-down list you want to use for the scan. 300 dpi is the default and is fine for 4x6 pictures. 600 dpi should be used for smaller pictures. The higher the resolution, the larger the file size and the slower the scan.
Sharpening: This drop-down list is available when scanning color pictures. It contains a list of supported sharpen levels for enhancing fuzzy images; None, Default, High, and Maximum.
Color restoration: Select to restore color on old faded photos. This check-box is available when scanning pictures.
Red Eye reduction: Select to automatically minimize red eye in flash photos. This check-box is available when scanning color pictures.
Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. This check-box is enabled when scanning pictures.
7
If desired, save the options you selected as a scan shortcut.
8
If desired, click Preview > to view of the scanned image (see Scan Preview).
9
Click Scan Now to start the scan.
The picture is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
10
If you have more pictures to scan, place the next one on the scanner glass and click Scan Next or Preview>.
User’s Guide 81
Chapter 6
11
When you have finished scanning, you can enhance your scanned pictures before selecting an
output option by clicking Edit
12
Click Continue to select output options.
13
Make sure File is selected in the Destinations list box.
14
Select a folder for saving the file from the Location drop-down list, or click Browse to select a
(see Enhance Picture).
folder from the Open dialog.
15
Enter a name for the file in the Filename edit box.
16
Select a graphic file format from the File type drop-down list.
17
If you selected JPEG .(jpg) as the File type, select the quality of the output file from the Quality drop-down list. The higher the quality the larger the file size.
18
Click Send to Destination to save the scanned picture(s) to the selected location. If you select all the scanned pictures, they are saved in separate files.
Scan to Printer
1
Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos.
2
On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
3
Click Go to Advanced to open the Advanced Scan window.
4
Select Picture.
5
Select Color or Black & White.
82 Kodak EasyShare 5300 AiO
6
If desired, set the following options.
Resolution: Choose the Resolution from the drop-down list you want to use for the scan. 300 dpi is the default and is fine for 4x6 pictures. 600 dpi should be used for smaller pictures. The higher the resolution, the larger the file size and the slower the scan.
Sharpening: This drop-down list is available when scanning color pictures. It contains a list of supported sharpen levels for enhancing fuzzy images; None, Default, High, and Maximum.
Color restoration: Select to restore color on old faded photos. This checkbox is available when scanning pictures.
Red Eye reduction: Select to automatically minimize red eye in flash photos. This checkbox is available when scanning color pictures.
Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. This checkbox is enabled when scanning pictures.
7
If desired, save the options you selected as a scan shortcut.
8
If desired, click Preview to view of the scanned image (see Scan Preview).
9
Click Scan Now to start the scan.
The picture is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
Scan
10
If you have more pictures to scan, place the next one on the scanner glass and click Scan Next or Preview>.
11
When you have finished scanning, you can enhance your scanned pictures before selecting an
output option by clicking Edit
12
Click Continue to select output options.
13
Select Printer in the Destinations list box.
14
Click Print to print the scanned picture(s) to your EasyShare AiO.
(see Enhance Picture).
User’s Guide 83
Chapter 6
Scan to EasyShare
1
Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos.
2
On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
3
Click Go to Advanced to open the Advanced Scan window.
4
Select Picture.
5
Select Color or Black & White.
6
If desired, set the following options.
Resolution: Choose the Resolution from the drop-down list you want to use for the scan. 300 dpi is the default and is fine for 4x6 pictures. 600 dpi should be used for smaller pictures. The higher the resolution, the larger the file size and the slower the scan.
Sharpening: This drop-down list is available when scanning color pictures. It contains a list of supported sharpen levels for enhancing fuzzy images; None, Default, High, and Maximum.
Color restoration: Select to restore color on old faded photos. This checkbox is available when scanning pictures.
Red Eye reduction: Select to automatically minimize red eye in flash photos. This checkbox is available when scanning color pictures.
Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. This checkbox is enabled when scanning pictures.
7
If desired, save the options you selected as a scan shortcut.
8
If desired, click Preview to view of the scanned image (see Scan Preview).
84 Kodak EasyShare 5300 AiO
9
Click Scan Now to start the scan.
The picture is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
10
If you have more pictures to scan, place the next one on the scanner glass and click Scan Next or Preview>.
11
When you have finished scanning, you can enhance your scanned pictures before selecting an
output option by clicking Edit
12
Click Continue to select output options.
13
Select Kodak EasyShare in the Destinations list box.
14
Select an album from the drop-down list or enter the name of a new album
15
Enter a base filename in the edit box.
16
If desired, select Open EasyShare software.
17
Click Send to Destination to send the scanned picture(s) to Kodak EasyShare.
(see Enhance Picture).
Scan to Application
Scan
1
Place your photo or photos face down on the scanner glass. Your Kodak All-in-One Printer can detect multiple photos.
2
On the main Home Center window, click Scan Photos and Documents to open the Basic Scan window.
3
Click Go to Advanced to open the Advanced Scan window.
4
Select Picture.
User’s Guide 85
Chapter 6
5
Select Color or Black & White.
6
If desired, set the following options.
Resolution: Choose the Resolution from the drop-down list you want to use for the scan. 300 dpi is the default and is fine for 4x6 pictures. 600 dpi should be used for smaller pictures. The higher the resolution, the larger the file size and the slower the scan.
Sharpening: This drop-down list is available when scanning color pictures. It contains a list of supported sharpen levels for enhancing fuzzy images; None, Default, High, and Maximum.
Color restoration: Select to restore color on old faded photos. This checkbox is available when scanning pictures.
Red Eye reduction: Select to automatically minimize red eye in flash photos. This checkbox is available when scanning color pictures.
Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. This checkbox is enabled when scanning pictures.
7
If desired, save the options you selected as a scan shortcut.
8
If desired, click Preview > to view of the scanned image (see Scan Preview).
9
Click Scan Now to start the scan.
The picture is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
10
When you have finished scanning, you can enhance your scanned pictures before selecting an
output option by clicking Edit
11
Click Continue to select output options.
12
Select an application from the Destinations list box. To add or delete applications from the list,
(see Enhance Picture).
click Modify List (see Scan Pictures Settings).
13
Click Send to Destination to save the scanned picture(s) to the selected application. If you select all the scanned pictures, they are inserted as separate pictures.
Scan Preview
Pictures
Picture controls are enabled if you are scanning pictures.
Automatically detect multiple pictures: Select to have the EasyShare AiO detect how photos are positioned on the scanner glass.
Manually select pictures: Select to use selection boxes in the Preview area to select the areas to scan.
Selection Box Size: The drop-down list and button are enabled when you select Manually select
pictures. Choose a selection box size from the list and click mouse to move and resize the selection boxes in the Preview area to manually select the areas to scan.
to add it to the Preview area. Use the
86 Kodak EasyShare 5300 AiO
Properties
Size: The size of the selected selection box's corresponding item, in the format of width and height units selected for the ruler.
Estimated .jpg file size: The size based on the resolution selected.
Quality prints up to: The maximum size you can print this image without losing quality.
Selection Box
Delete Selection Box: Enabled if a selection box is selected in the Preview area. Clicking deletes the selected selection box from the Preview area.
Rotate Selection Box: Enabled if a selection box is selected in the Preview area. Clicking rotates the selected selection box 90 degrees clockwise in the Preview area.
Zoom
To zoom the preview, grab the slider with the mouse and slide it to the right.
Preview Display
Scan
The preview display area shows the results of a preview scan and any adjustments you make to the scanned item. The preview display area is re-sizable.
Ruler Units
Click to select ruler units from menu; inches or centimeters.
Edit Picture
The Enhance Picture dialog opens with the Enhancements options shown. Click to hide options and to show options. The results of the selected checkboxes are reflected on the photo in the preview area.
Enhancements
Sharpening: This drop-down list is available when scanning color pictures. It contains a list of supported sharpen levels for enhancing fuzzy images; None, Normal, High, and Exaggerated.
Kodak Perfect Touch technology: Automatically corrects for common image flaws and "mis takes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. This checkbox is disabled when scanning black and white pictures.
Red Eye Reduction: Select to automatically remove red eye in flash photos. This checkbox is available when scanning color pictures.
Rotate: Rotates the picture 90 degrees clockwise in the Preview area. Zoom: To zoom the picture, grab the slider with the mouse and slide it to
the right.
Color Restoration: Select to restore color on old faded photos. This checkbox is available when scanning color pictures.
User’s Guide 87
Chapter 6
Adjustments
Brightness: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust brightness.
Contrast: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust contrast.
Saturation: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust saturation.
Kodak Perfect Touch technology: Automatically corrects for common image flaws and "mis takes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of photos, for vibrant color and richer detail. This checkbox is disabled when scanning black and white pictures.
Shadows: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust shadows.
Midtones: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust midtones.
Highlights: Move the slider with the mouse, or enter a number between -10 and +10 in the text box to adjust highlights.
Crop
Picture Size Crop: Allows you to select crop sizes from the drop-down list, rotate the crop box, and move and resize the crop box with the mouse.
Free Form: Allows you to move and resize the crop box with the mouse.
NOTE: A "Crop selection is below the minimum cropping size" message is displayed if you crop too much
of the picture. The minimum cropping size is not fixed values, but depends on picture size and resolution.

Scanning Documents

The AiO Home Center software allows you to scan documents to a file, Email, or an application.
Scan to File
1
Place your original face down on the right front corner of the scanner glass.
2
On the main Home Center window, click Scan Photos and Documents to open the Basic Scan window.
3
Click Go to Advanced to open the Advanced Scan window.
88 Kodak EasyShare 5300 AiO
4
Select Document.
Scan
5
Select Color, Grayscale, or Black & White.
6
If desired, change the Resolution.
7
If you changed the Resolution, you can save it as a scan shortcut.
8
Click Scan Now to start the scan.
The page on the scanner glass is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
User’s Guide 89
Chapter 6
9
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>.
10
When you have finished scanning, click Continue to select output options.
11
Make sure File is selected in the Destinations list box.
90 Kodak EasyShare 5300 AiO
12
Select a folder for saving the file from the Location drop-down list, or click Browse to select a folder from the Open dialog.
13
Enter a name for the file in the Filename edit box.
14
Select a file format from the File type drop-down list. To produce a file that can be edited, select RTF (.rtf).
15
If you selected JPEG (.jpg) as the File type, select the quality of the output file from the Quality drop-down list. The higher the quality the larger the file size.
16
If desired, select Combine selected pages into single document.
17
Click Send to Destination to save the scanned page(s).
Scan to Email
1
Place your original face down on the right front corner of the scanner glass.
Scan
2
On the main Home Center window, click Scan Photos and Documents to open the Basic Scan window.
3
Click Go to Advanced to open the Advanced Scan window.
User’s Guide 91
Chapter 6
4
Select Document.
5
Select Color, Grayscale, or Black & White.
6
If desired, change the Resolution.
7
If you changed the Resolution, you can save it as a scan shortcut.
8
Click Scan Now to start the scan.
The page on the scanner glass is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
92 Kodak EasyShare 5300 AiO
9
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>.
Scan
10
When you have finished scanning, click Continue to select output options.
11
Select Email n the Destinations list box.
User’s Guide 93
Chapter 6
12
Select a folder for saving the file from the Location drop-down list, or click Browse to select a folder from the Open dialog.
13
Enter a name for the file in the Filename edit box.
14
Select a graphic file format from the File type drop-down list.
15
If you selected JPEG (.jpg) as the File type, select the quality of the output file from the Quality drop-down list. The higher the quality the larger the file size.
16
If desired, select Combine selected pages into single document.
17
Click Send to Destination to save the scanned page(s) to the selected location.
Scan to Printer
1
Place your original face down on the right front corner of the scanner glass.
2
On the main Home Center window, click Scan Pictures and Documents to open the Basic Scan window.
3
Click Go to Advanced to open the Advanced Scan window.
94 Kodak EasyShare 5300 AiO
4
Select Document.
Scan
5
Select Color, Grayscale, or Black & White.
6
If desired, change the Resolution.
7
If you changed the Resolution, you can save it as a scan shortcut.
8
Click Scan Now to start the scan.
The picture is scanned and scan progress information appears that shows the progress of the scan. When the scan is completed, scan complete information and controls appear.
User’s Guide 95
Chapter 6
9
If you have more pages to scan, place the next page on the scanner glass and click Scan Next or Preview>.
10
When you have finished scanning, click Continue to select output options.
11
Select Printer in the Destinations list box.
96 Kodak EasyShare 5300 AiO
Loading...