KODAK C315, C530, CD50 SERVICE MANUAL
{ServiceManual}{Produ ction}{KodakServiceSupp ort}{ExternalAndInterna l}
SERVICE MANUAL
Kodak EasyShare C315 DIGITAL CAMERA
Service Code: 1132
Kodak EasyShare C530 DIGITAL CAMERA
Service Code: 1398
Kodak EasyShare CD50 DIGITAL CAMERA
Service Code: 1133
Important
Qualified service personnel must repair this equipment.
for
Publication No. SM1132-1
11NOV05
Confidential
Restricted Information
© Eastman Kodak Company, 2005
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak sh all not be liable
for any loss or damage, including consequential or special damages, resulting from any use of
this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
Table of Contents
Description Page
Illustrated Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Necessary Materials
Configurations for the CAMERA DOCK
Reference Table for New CAMERAS
Reference Table for Adjustment Procedures
Visual Index
Equipment Parts
COVER AYs
SHUTTER BOARD
MONITOR LCD AY
MCU BOARD/LENS AY and POWER BOARD/FRAME AY
Alphabetical Index
Diagnostics
Error Codes
E00
E20
Troubleshooting
LEDs
MONITOR LCD
STROBE
MEMORY CARD
Power
Image Quality
Communication
General Functions
Diagnostic Tests
Low Voltage Test
Checking the Power On “Self Test”
Checking for Uniform Flash
Checking “Wide IQ Chart w/o Flash”
Checking “Wide IQ Chart with Flash”
Checkout Procedures
Checking the General Functions of the CAMERA
Checking the Communication
Checking the Accessories
Checking the External Components of the CAMERA
Adjustments
MASTER CAMERA - “Calibration of the MASTER CAMERA”
CCD - “AWB/ ISO/DBP”
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2 11NOV05 – SM1132-1
MCU BOARD/LENS AY - “Shutter Delay” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacements
Additional Service Procedures
Downloading the Files from the Partner Site
Installing the
Doing the Configuration of the SERVICE SOFTWARE
Connecting to the SERVICE SOFTWARE
Making the MEMORY CARDS for Service
Doing a Calibration of the Test Equipment
Downloading the Firmware for the First Time
Upgrading the Firmware Using the MEMORY CARD
Upgrading the Firmware Using the Internal Me m or y
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Altek Vista SERVICE SOFTWARE on the Computer . . . . . . . . . . . . . . 42
. . . . . . . . . . . . . . . . . . . . . . . 49
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Making the “Master Camera” MEMORY CARDS
Making the “Self Test” MEMORY CARDS
Making the “Shutter Delay” MEMORY CARDS
Making the “AWB/ISO/DBP” MEMORY CARDS
. . . . . . . . . . . . . . . . . . . . . . . . 54
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
. . . . . . . . . . . . . . . . . . . . . . . . . 57
. . . . . . . . . . . . . . . . . . . . . . . . 58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setting up the LIGHT BOX - “Light Box Calibration (LV10.0)”
. . . . . . . . . . . . . . 59
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
. . . . . . . . . . . . . . . . . . . . . . . . . 62
. . . . . . . . . . . . . . . . . . . . . . . . . 63
Checking the ACTUATION, FLASH, POWER-ON COUNTERS and Serial Number
Diagrams
Publication History
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Block
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
System Overview
Schematics
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
MCU BOARD/LENS AY
MODE DIAL CIRCUIT
POWER BOARD
SHUTTER BOARD
Component Locator
MCU BOARD/LENS AY - 1 of 2, Top
MCU BOARD/LENS AY - 2 of 2, Bottom
MODE DIAL CIRCUIT - 1 of 2, Top
MODE DIAL CIRCUIT - 2 of 2, Bottom
POWER BOARD - 1 of 2, Top
POWER BOARD - 2 of 2, Bottom
SHUTTER BOARD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
. 64
SM1132-1 – 11NOV05 3
SERVICE MANUAL
Section 1: Illustrated Parts List
Necessary Materials
Primary Tools
Description Part No.
ESD MAT Region Provided
TWEEZERS Region Provided
SOLDER REMOVAL TOOL Region Provided
FLASH CAPACITOR DISCHARGE TOOL - resistor minimum, 1.2 kW TL-5336
DIGITAL VOLTMETER TL-4114
LIGHT BOX - Arrowin LBF, 2001 ------DC POWER SUPPLY - 0 - 12 V, 5.0 A with clip leads, ez or alligator Region Provided
TRIPOD - Bogen, Model 3021s TL-5176
TRIPOD HEAD - Bogen, Model 3047 TL-5206
OPTRONICS PHOTOMETER/DETECTOR - Graseby -------
COLOR TEMPERATURE METER - Gossen Color Pro 3F, or equivalent ------AIR HOSE - optional Region Provided
Computer:
• Microsoft Windows XP OPERATING SYSTEM
• IBM COMPUTER or IBM compatible with a Pentium PROCESSOR, 233 MHz
or higher
• 128 MB RAM for Windows XP
• 200 MB hard disk space
• CD-ROM DRIVE
• USB PORT
• 21-in. color MONITOR
• 24-bit XGA VIDEO CARD
• Color VIDEO MONITOR
FEEDBACK SOFTWARE Region Provided
Kodak LENS CLEANING PAPER Region Provided
Kodak LENS CLEANER 1C8000
COVER CLEANER - Johnson SHINE-UP FURNITURE WAX TL-5182
LAMP - Arrowin LBF, 2001 light box, EVC/FGX, Phillips, 6958 Region Provided
FLASH METER TL-5205
STATION - Weller, soldering, 50 W TL-5412
TIP - soldering iron, standard ST1 TL-5413
TIP - soldering iron, single flat ST5 TL-5414
TIP - soldering iron, conical ST7 TL-5415
SCREWDRIVER - Milwaukee, cordless, with battery and charger, optional TL-5424
HEX ADAPTER - 0.40 mm (0.02 in.) bit, optional TL-5421
BATTERY for a POWER SCREWDRIVER - 2.4 V, optional TL-5422
BIT - power, 00 x 80 mm (3.14 in.), 4 mm (0.15 in.) drive, optional TL-5423
TWEEZERS - special TL-5338
Region Provided
4 11NOV05 – SM1132-1
Illustrated Parts List
Description Part No.
PAINT - 18% gray, interior, flat Region Provided
Vendor:
RC Shaheen
1400 St. Paul Blvd.
Rochester, NY 14621
Telephone: 585-266-1500
MUR1597
TARGET - 18% gray TL-5845
SCREWDRIVER - Phillips, No. 00 x 40 mm (1.57 in.) TL-5429
SCREWDRIVER - Phillips, No. 000 x 40 mm (1.57 in.) TL-5430
SCREWDRIVER - Phillips, No. 2 x 40 mm (1.57 in.) TL-5431
SCREWDRIVER - Phillips, No. 0 x 50 mm (1.97 in.) TL-5432
GEN 2 CAMERA POST - optional TL-5416
GEN 2 CUSTOM TEXT FIXTURE - optional 5E8164
GEN 2 CAMERA POST FABRICATION DRAWING - optional 5E8161
GEN 2 CUSTOM TEST FIXTURE FABRICATION DRAWING - optional 5E8163
Special Tools
Description Part No.
TARGET - AF compensation TL-5752
TARGET - AF passive parallax compensation TL-5689
TARGET - AF passive compensation, 0.50 m (19.7 in.) TL-5687
TARGET - AF passive compensation, 1.00 m (39.4 in.) TL-5688
BATTERY VOLTAGE ADJUSTMENT TOOL - battery simulator TL-5637
CAMERA NEST TL-5856
Kodak Ni-MH RECHARGEABLE DIGITAL CAMERA BATTERY AA -
815 6572
2100 mA-hour
Kodak Ni-MH RECHARGEABLE DIGITAL CAMERA BATTERY KAA2HR -
114 8683
1850 mA-hour
Kodak EasyShare CAMERA DOCK SERIES 3 188 6597
Kodak DOCK ADAPTER KIT D-22*** 175 6824
USB CABLE, 8-PIN, Model U-8, for Kodak EasyShare DIGITAL CAMERAS 195 5137
A/V CABLE, 8-PIN, Model AV-8, for Kodak EasyShare DIGITAL CAMERAS 811 8390
SERVICE SOFTWARE - “Altek Vista Service Software” **
Software and Firmware files - “TBM_ARES.bin” **
Kodak EasyShare SOFTWARE - Version 5.01 or higher *
* This item is provided by the region.
** This file is on the Kodak Partner Web site at https://partner.kodak.com/.
*** See “
Configurations for the CAMERA DOCK” on Page 6.
SM1132-1 – 11NOV05 5
SERVICE MANUAL
Configurations for the CAMERA DOCK
CUSTOM
DOCK
INSERT
DOCK ADAPTER
KIT D-22
CAMERA
DOCK
6000
Figure 2
CUSTOM
DOCK
INSERT
CAMERA
DOCK
SERIES 3
P252_0075BAFigure 1
Note
• You must use the Kodak DOCK ADAPTER KIT D-22 when connecting to the Kodak EasyShare CAMERA DOCK
6000.
– Kodak EasyShare C315 DIGITAL CAMERA
– Kodak EasyShare C530 DIGITAL CAMERA
– Kodak EasyShare CD50 DIGITAL CAMERA
• The above CAMERAS are also compatible with:
– Kodak EasyShare CAMERA DOCK SERIES 3
– other 26-PIN DOCKS
6 11NOV05 – SM1132-1
Illustrated Parts List
Reference Table for New CAMERAS
Use the following catalog numbers to order a replace m en t CAM E RA if the CAME R A is under wa rr an ty an d cann o t
be repaired, or to order a MASTER CAMERA.
Region Language
Americas and Canada, SENSORMATIC
and CHECKPOINT TAG
Americas and Canada, non-OFM
SENSORMATIC and CHECKPOINT TAG
Brazil • Italian
Europe, Africa, and the Middle East • English
Europe, Africa, and the Middle East • Italian
Europe, Africa, and the Middle East
Europe, Africa, and the Middle East
Greater China and Taiwan • English
• English
• French
• Spanish
• English
• French
• Spanish
• Spanish
• Portuguese
• French
• German
• Spanish
• Portuguese
Nordic - - - - 392 8140 392 6763
Emerging - - - - 392 8157 392 6755
• Chinese
– simplified
– traditional
Catalog No.
for C315
828 4036 173 8814 857 0830
141 8227 115 7528 834 8674
814 3315 131 1141 857 6894
- - - - 831 8180 875 0887
- - - - 392 8132 392 6771
- - - - 869 2899 824 7496
Catalog No.
for C530
Catalog No.
for CD50
• Korean
People’s Republic of China • English
• Chinese
– simplified
– traditional
- - - - 832 2992 108 3112
• Korean
Asia Pacific and Korea • English
• Korean
• Chinese
– simplified
– traditional
Americas and Canada, CLAMSHELL, with
non-OFOTO MAX CHECKPOINT TAG
Brazil, CLAMSHELL, non-OFOTO MAX • Italian
• English
• French
• Spanish
• Spanish
• Portuguese
- - - - 857 9419 839 0965
807 1524 TBD - - - -
843 0621 TBD - - - -
Japan Japanese 863 5047 863 5047 173 3799
Kodak Service & Support - bulk, class A English
Kodak Service & Support - retail, class A English
Kodak Service & Support - bulk, class B English
Kodak Service & Support - retail, class B English
SP843 4045 SP857 9617 SP164 4814
SP828 4036 SP150 0990 SP857 0830
SP845 4811 SP157 6354 SP825 7537
SP143 2475 SP881 5938 SP184 2525
SM1132-1 – 11NOV05 7
SERVICE MANUAL
Reference Table for Adjustment Procedures
Component Procedure
MCU BOARD AND LENS AY • “
MCU BOARD/LENS AY - “Shutter Delay”” on Page 38
• “CCD - “AWB/ ISO/DBP”” on Page 36
8 11NOV05 – SM1132-1
Visual Index
Illustrated Parts List
1
3
2
4
1
P269_1000ECA
P269_1000EC
Item Description
1 “
COVER AYs” on Page 10
2 “SHUTTER BOARD” on Page 12
3 “MONITOR LCD AY” on Page 13
4 “MCU BOARD/LENS AY and POWER BOARD/FRAME AY” on Page 14
SM1132-1 – 11NOV05 9
SERVICE MANUAL
Equipment Parts
Important
Before removing the BACK COVER AY, you must:
• remove, if installed:
– MEMORY CARD
– BATTERY
• rotate the MODE DIAL to “AUTO”
Figure 1 COVER AYs
2
2
1
1
5
5
4
1
1
4
6
6
3
3
1
1
P269_1001DCA
10 11NOV05 – SM1132-1
Illustrated Parts List
Figure 1 COVER AYs
Item Part No. Description Quantity Notes
1 3F6412 SCREW - PH, tap, 1.7 X 3, black
2 3F9094 COVER AY - back, C315
3F9229 COVER AY - back, C530
1 6
1 1
1
3F9227 COVER AY - back, CD50 1
3 3F3093 COVER AY - front, C315 1 1
3F9228 COVER AY - front, C530
1
3F9224 COVER AY - front, CD50 1
4 3F9100 HINGE - battery cover 1 1
5 3F9101 SPRING - battery cover, C315
6 3F9099 COVER AY - battery
- - - - 3F6387 STRAP - wrist
- - - - 3F9105 CUSTOM INSERT - dock, C315
1 1
1 1
1 1 Not visible in the graphic.
1 1 Not visible in the graphic.
SM1132-1 – 11NOV05 11
SERVICE MANUAL
Important
Before removing the SHUTTER BOARD, you must remove the SOLDER from the SOLDER JOINTS.
Figure 2 SHUTTER BOARD
1
1
2
2
P269_1002BCA
P269_1002BC
Figure 2 SHUTTER BOARD
Item Part No. Description Quantity Notes
1 - - - - SOLDER JOINTS
2 3F9098 BOARD - shutter
2 3
2 1
12 11NOV05 – SM1132-1
Illustrated Parts List
Important
Before removing the MONITOR LCD and HOLDER AY, you must remove the SOLDER from the SOLDER JOINTS.
Figure 3 MONITOR LCD AY
2
2
3
3
4
4
P269_1003DCA
P269_1003DC
1
1
Figure 3 MONITOR LCD AY
Item Part No. Description Quantity Notes
1 3F9103 SCREW - PH, tap, 1.7 X 4, Ni
2 - - - - SOLDER JOINTS
3 3F9092 MONITOR LCD
4 3F9097 HOLDER AY - monitor LCD
3 1
3 2
3 1
3 1
SM1132-1 – 11NOV05 13
SERVICE MANUAL
1
1
Figure 4 MCU BOARD/LENS AY and POWER BOARD/FRAME AY
4
4
3
3
5
5
2
2
Figure 4 MCU BOARD/LENS AY and POWER BOARD/FRAME AY
Item Part No. Description Quantity Notes
1 3F9103 SCREW - PH, tap, 1.7 X 4, Ni
2 3F9102 CABLE - FPC, 28-pin
3 - - - - SOLDER JOINTS
4 3F9095 BOARD - MCU and lens ay
5 3F9096 BOARD - power and frame ay
- - - - 3F6205 FUSE F1 - VF, 2.5 A, 32 V
4 2
4 1
4 2 black and red wires
4 1
4 1
4 2See “POWER BOARD - 1 of
2, Top” on Page 81.
- - - - 3F6205 FUSE F2 - VF, 2.5 A, 32 V
4 2See “POWER BOARD - 2 of
2, Bottom” on Page 82.
- - - - 3F9104 FUSE F3 - VF, 2.0 A, 32 V
4 1See “POWER BOARD - 2 of
2, Bottom” on Page 82.
- - - - 3F6204 FUSE F4 - 1.25 A, 32 V
4 1See “POWER BOARD - 2 of
2, Bottom” on Page 82.
P269_1004DCA
P269_1004DC
14 11NOV05 – SM1132-1
Alphabetical Index
Section 2: Alphabetical Index
Alphabetical Index
Part No. Description Figure No.
3F9095 BOARD - MCU and lens ay 4
3F9096 BOARD - power and frame ay 4
3F9098 BOARD - shutter 2
3F9102 CABLE - FPC, 28-pin 4
3F9094 COVER AY - back, C315 1
3F9229 COVER AY - back, C530 1
3F9227 COVER AY - back, CD50 1
3F9099 COVER AY - battery 1
3F3093 COVER AY - front, C315 1
3F9228 COVER AY - front, C530 1
3F9224 COVER AY - front, CD50 1
3F9105 CUSTOM INSERT - dock, C315 1
3F6205 FUSE F1 - VF, 2.5 A, 32 V 4
3F6205 FUSE F2 - VF, 2.5 A, 32 V 4
3F9104 FUSE F3 - VF, 2.0 A, 32 V 4
3F6204 FUSE F4 - 1.25 A, 32 V 4
3F9100 HINGE - battery cover 1
3F9097 HOLDER AY - monitor LCD 3
3F9092 MONITOR LCD 3
3F6412 SCREW - PH, tap, 1.7 X 3, black 1
3F9103 SCREW - PH, tap, 1.7 X 4, Ni 3
3F9103 SCREW - PH, tap, 1.7 X 4, Ni 4
- - - - SOLDER JOINTS 3
- - - - SOLDER JOINTS 2, 4
3F9101 SPRING - battery cover, C315 1
3F6387 STRAP - wrist 1
SM1132-1 – 11NOV05 15
SERVICE MANUAL
Section 3: Diagnostics
Error Codes
E00
Description Recommended Action
A communication error occurred between the
MCU and the 16-BIT MAIN CPU.
E20
Description Recommended Action
An error occurred when the CAMERA was writing to the
NANDFLASH memory.
Troubleshooting
LEDs
Do “
Upgrading the Firmware Using the MEMORY
CARD” on Page 62.
Do “
Upgrading the Firmware Using the MEMORY
CARD” on Page 62.
Description Recommended Action
The red VIEWFINDER LED is blinking. 1. Install a new BATTERY.
2. Check the BATTERY CONTACTS.
3. Install a new BATTERY DOOR AY.
MONITOR LCD
Description Recommended Action
The MONITOR LCD does not energize. 1. Check:
• CAMERA energizes
• CABLE to the MONITOR LCD has a correct and
tight connection
• MCU BOARD/LENS AY has no damage
• MONITOR LCD has no damage
2. Install:
• new MONITOR LCD
• new MCU BOARD/LENS AY
The MONITOR LCD energizes, but the screen is blank. 1. Check the FPC from the MONITOR LCD to
CONNECTOR J1 on the MCU BOARD.
2. Install:
• new MONITOR LCD
• new MCU BOARD/LENS AY
Malfunction of pixels occurs on the MONITOR LCD. Install a new MONITOR LCD.
16 11NOV05 – SM1132-1
Diagnostics
Description Recommended Action
Horizontal or vertical lines display on the MONITOR
LCD.
1. Check:
• FPC from the MONITOR LCD to CONNECTOR
J1 on the MCU BOARD
• MCU BOARD/LENS AY has no damage
2. Install:
• new MONITOR LCD
• MCU BOARD/LENS AY
STROBE
Description Recommended Action
The STROBE does not energize. 1. Check that the correct mode of the STROBE is
selected.
2. Measure the voltage of the STROBE CAPACITOR
across both ends of the LAMP. The voltage should
be > 280 V.
3. Check:
• FUSE F4 on the POWER BOARD
• COIL and PLATE for the TRIGGER is soldered
correctly
The STROBE operates in the “Fill Flash” mode, but does
not operate in the “Auto Flash” mode.
Smoke emits from the CAMERA when the STROBE is
actuated.
The LAMP for the STROBE is dark. Do a replacement of the CAMERA.
Check the brightness of the environment.
Check:
• connection of the red and black wires between the
STROBE AY and the POWER FRAME AY
• STROBE COVER or STROBE REFLECTOR AY
has no debris
SM1132-1 – 11NOV05 17
SERVICE MANUAL
MEMORY CARD
Description Recommended Action
The CAMERA does not recognize the MEMORY CARD. 1. Use a new MEMORY CARD.
2. Check:
•“IMAGE STORAGE” option is set to “AUTO”
• SOCKET of the MEMORY CARD on the MCU
BOARD/LENS AY has no damage
3. Do “
Images are not stored on MEMORY CARD. 1. Use a new MEMORY CARD.
2. Check:
3. Format the MEMORY CARD and capture an image
4. Do “
Upgrading the Firmware Using the Internal
Memory” on Page 63.
• position of the WRITE PROTECT SWITCH on
the SD CARD
•“IMAGE STORAGE” option is set to “AUTO”
• SOCKET of the MEMORY CARD on the MCU
BOARD/LENS AY has no damage
again.
Upgrading the Firmware Using the Internal
Memory” on Page 63.
Power
Description Recommended Action
The CAMERA does not energize. 1. Check:
• power source for the CAMERA
• FUSE F1 and F2 on the POWER BOARD. If
• BOARD-TO-BOARD CONNECTOR JP1 on the
2. Diagnose the MODULE that has the malfunction.
• Disconnect all MODULES from the MODE DIAL
• Connect the MODULES one at a time, until the
3. Install a new:
• MODE DIAL BOARD
• POWER BOARD
• MCU BOARD/LENS AY
The CAMERA with no BATTERY does not operate on
the CAMERA DOCK.
1. Check the DOCK CONNECTOR on the CAMERA.
2. Install a new MCU BOARD/LENS AY.
open, install a new FUSE.
MCU BOARD/LENS AY to J3 on the POWER
BOARD
BOARD.
FUSE opens.
18 11NOV05 – SM1132-1
Image Quality
Description Recommended Action
The images are black. 1. Check:
• BOARD-TO-BOARD CONNECTOR J1 on the
• FPC
• any sound from the SHUTTER
2. Install a new MCU BOARD/LENS AY.
• The image is not in focus.
• The color of the image is not correct.
• The images are too light.
• The images are too dark.
• The images have pixels that are continually
energized.
• The captured image is other than the image
displayed on the VIEWFINDER AY.
Install a new MCU BOARD/LENS AY.
Diagnostics
MCU BOARD/LENS AY to J3 on the POWER
BOARD
Communication
Description Recommended Action
The CAMERA does not download images from the USB
PORT.
1. Connect the CAMERA to the computer to check for
communication.
2. Check for damage on:
• USB CONNECTOR to the PINS on the J3 on the
MCU BOARD
• BOARD-TO-BOARD CONNECTOR J1 on the
MCU BOARD/LENS AY to J3 on the POWER
BOARD
3. Install a new MCU BOARD/LENS AY.
SM1132-1 – 11NOV05 19
SERVICE MANUAL
General Functions
Description Recommended Action
One or more do not operate correctly:
•“menu” BUTTON
• FLASH BUTTON
•“share” BUTTON
•“delete” BUTTON
•“review” BUTTON
• 4-WAY BUTTON
•“OK” BUTTON
The SHUTTER BUTTON does not operate correctly. 1. Check the connection of the SHUTTER BOARD to
The SELF-TIMER LED does not operate correctly. Check the connection of the red and black wires from
1. Check for damage to:
• BUTTONS
• inside the BACK COVER AY
2. Install a new:
• BACK COVER AY
• MCU BOARD/LENS AY
the MCU BOARD/LENS AY.
2. Install a new:
• SHUTTER BOARD
• MCU BOARD/LENS AY
the SELF-TIMER LED to the MCU BOARD/LENS AY.
20 11NOV05 – SM1132-1
Diagnostics
Diagnostic Tests
Low Voltage Test
[1] Connect the DIGITAL MULTIMETER TL-4114 to the BATTERY VOLTAGE ADJUSTMENT TOOL TL-5637:
To the BATTERY VOLTAGE
Wire Color From the DIGITAL MULTIMETER:
Red “+”“2.6 V”
Black Ground Ground
[2] Energize the DIGITAL MULTIMETER.
[3] Set the DIGITAL MULTIMETER to 2.6 V.
[4] Install the CAMERA on the BATTERY VOLTAGE ADJUSTMENT TOOL.
[5] Set the SWITCHES on the BATTERY VOLTAGE ADJUSTMENT TOOL to:
•“2.6 V”
•“ON”
[6] Energize the CAMERA.
[7] Set the CAMERA to the “Fill Flash” mode.
[8] Press the SHUTTER BUTTON.
[9] Check:
• STROBE actuates
• image displays correctly
• low “Battery” icon displays
ADJUSTMENT TOOL
Note
If the results are not within specification:
• red VIEWFINDER LED blinks
•“Battery” icon blinks
• error code displays
[10] Delete the image.
[11] De-energize the CAMERA.
SM1132-1 – 11NOV05 21
SERVICE MANUAL
Checking the Power On “Self Test”
[1] Do Making the “Self Test” MEMORY CARDS on Page 56 .
[2] Insert the correct MEMORY CARD in the CAMERA:
CAMERA MEMORY CARD
EasyShare C315 DIGITAL CAMERA “C315 Self Test”
EasyShare C530 DIGITAL CAMERA “C530 Self Test”
EasyShare CD50 DIGITAL CAMERA “CD50 Self Test”
[3] Do either:
• Install the CAMERA on the CAMERA DOCK.
• Insert a BATTERY that has a full charge into the CAMERA.
[4] Energize the CAMERA to execute the test.
[5] If the MONITOR LCD displays “Date and time have been reset”, select “CANCEL”.
[6] For each test displaying on the MONITOR LCD, check:
Test Check:
“F/W: n.nnnn” version of firmware
“RGB Level Checking...” quality of the 6 colors
“Gray Level Checking...” quality of the 6 gray areas
“LEDs On/Off testing”•green LED on the front of the CAMERA illuminates
• red and green LEDs on the back of the CAMERA illuminate
“LCD On/Off testing” MONITOR LCD blinks
“Strobe testing” STROBE energizes once
“SDRAM testing”•“SDRAM OK”
“IDRAM testing”
“SD card testing”
“NAND flash testing”
“Temperature checking...” message “OK”
“LCD Bad pixel testing” MONITOR LCD for:
•“IDRAM OK”
•“SD Card OK”
•“NAND Flash OK”
• dark pixels in the white screen
• white pixels in the dark screen
[7] When the test is completed, de-energize the CAMERA.
[8] Remove the MEMORY CARD.
22 11NOV05 – SM1132-1
Checking for Uniform Flash
Diagnostics
Important
• A dark room or the GEN 2 CUSTOM TEST FIXTURE can be used.
• The distance is measured from the surface of the TARGET to the front of the LENS.
[1] If using:
Dark Room GEN 2 CUSTOM TEST FIXTURE with Controlled Light
Place the TARGET 1 m (39.4 in.) from the
front surface of the CAMERA.
[2] Install the CAMERA on the CAMERA NEST.
[3] Connect to the CAMERA:
• AC ADAPTER
• USB CABLE
[4] Do Step 1
- Step 10 of “Connecting to the SERVICE SOFTWARE” on Page 52.
Place the TARGET in SLOT 5.
SM1132-1 – 11NOV05 23
SERVICE MANUAL
[5] Select “Flash Uniformity”.
[6] Click [OK].
[7] Check the mark on the computer screen.
Green “✓”Red “X”
• The test was successful.
• Continue with Step 8
.
• A failure occurred.
• De-energize the CAMERA.
• Do “
Checking for Uniform Flash” on Page 23 again.
• If the failure occurs again, check the hardware.
[8] Close “Flash Uniformity” window.
[9] Continue with Checking “Wide IQ Chart w/o Flash”
24 11NOV05 – SM1132-1
on Page 25.
Checking “Wide IQ Chart w/o Flash”
[1] Select “Wide IQ Chart w/o Flash”.
[2] Click [OK].
Diagnostics
[3] Click [OK].
[4] Continue with “
Checking “Wide IQ Chart with Flash”” on Page 26.
SM1132-1 – 11NOV05 25
SERVICE MANUAL
Checking “Wide IQ Chart with Flash”
[1] Select “Wide IQ Chart with Flash”.
[2] Click [OK].
[3] Click [OK].
[4] Close:
• “Menu for service” window
•“VISTA for SERVICE (Kodak)” window
[5] De-energize the CAMERA.
26 11NOV05 – SM1132-1
Loading...