DIGITAL
CLAMP METERS
FEATURES
Drop Protection
Ingress Protection
Safety
AC Voltage (Volts)
DC Voltage (Volts)
AC + DC Voltage
AC Current (Amps)
DC Current (Amps)
Ohms (Resistance)
AC Millivolts
DC Millivolts
DC Microamps
True RMS
Audible Continuity
Backlight
Temperature
Differential
Temperature
Digital Temperature
Calibration
Low Impedance
CL900
6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m)
IP40 IP40 IP40 IP40 – – – – –
CAT IV 600V
CAT III 1000V
1000V 1000V 1000V 1000V 1000V 600V 600V 600V 600V
1000V 1000V 1000V 1000V 1000V 600V 600V 600V 600V
– – – – – – – –
2000A 600A 600A 600A 600A 400A 400A 400A 400A
2000A 600A – – – 400A – – –
60MΩ 60MΩ 60MΩ 60MΩ 60MΩ 40MΩ 40MΩ 20MΩ 20MΩ
– – – – – –
– – – – – –
–
– – – – – – – –
– – – – – – – –
CL800 CL700 CL600
CAT IV 600V
CAT III 1000V
-14° – 1000°F
(-26° – 538°C)
CAT IV 600V
CAT III 1000V
-14° – 1000°F
(-26° – 538°C)
CAT IV 600V
CAT III 1000V
–
– – – – –
CL450
CAT IV 600V
CAT III 1000V
-40° – 1832°F
(-40° – 1000°C)
CL390
CAT III 600V CAT III 600V CAT III 600V CAT III 600V
Reverse
Contrast Display
-40° – 1832°F
(-40° – 1000°C)
CL320 CL220 CL120
-40° – 1832°F
(-40° – 1000°C)
-40° – 1832°F
(-40° – 1000°C)
–
–
Low-Pass Filter
Inrush Current
Non-Contact
Voltage Testing
Auto Ranging
Range Hold
Data Hold
Diode Test
Capacitance Test
Frequency /
Duty Cycle
Max / Min
Relative Mode
Magnet
Worklight
Auto-Power Off
LCD Display Count
Specifications subject to change.
– – – – – – – –
2000A – – – 600A – – – –
– –
6000 µF 6000 µF 6000 µF – 6000 µF 4000 µF 4000 µF – –
1Hz – 500kHz 1Hz – 500kHz 1Hz – 500kHz – 10Hz – 1MHz 10Hz – 60kHz 10Hz – 60kHz – –
MAX only MAX only
– – – – – – –
Available As
Accessory
– – – – – – – –
6000 6000 6000 6000 6000 4000 4000 2000 2000
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
MKT022620 Rev 0
Available As
Accessory
8/20 C
Loading...