KitchenAid YKFED500ESS3, YKFED500ESS2, YKFED500ESS1, YKFED500EBS3, KFED500EWH03 Owner’s Manual

...
ELECTRIC DOUBLE OVEN RANGE
USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. Register your new range at www.kitchenaid.com. In Canada, register your range at www.kitchenaid.ca.
For future reference, please make a note of your product model and serial numbers. These can be located on the serial plates. The serial plates are located behind the control panel. You may view them by rotating the serial plates up.
Model Number_______________________________________ Serial Number________________________________________
Para una versión de estas instrucciones en español, visite www.kitchenaid.com. Deberá tener los números de modelo y serie, que se pueden encontrar en las placas de serie detrás del panel de control. Los puede
ver al rotar hacia arriba las placas de serie.
Table of Contents
RANGE SAFETY ....................................................................... 2
The Anti-Tip Bracket ............................................................ 2
FEATURE GUIDE ..................................................................... 4
COOKTOP USE ....................................................................... 7
Cookware ............................................................................ 8
Home Canning .................................................................... 9
OVEN USE ............................................................................ 10
Electronic Oven Controls ................................................... 10
Keep Warm ......................................................................... 11
Sabbath Mode ................................................................... 11
Aluminum Foil .................................................................... 12
Positioning Racks and Bakeware ....................................... 12
Roll-Out Rack ..................................................................... 13
Oven Vents ......................................................................... 13
Baking and Roasting ......................................................... 13
Broiling ............................................................................... 14
Lower Oven Convection Cooking ....................................... 14
EasyConvect™ Conversion ............................................... 14
Slow Cook .......................................................................... 15
Proong Bread ................................................................... 15
Cook Time .......................................................................... 15
RANGE CARE ....................................................................... 16
Self-Cleaning Cycle ............................................................ 16
General Cleaning ................................................................ 17
Oven Lights ........................................................................ 18
PROBLEM SOLVER ............................................................. 18
ACCESSORIES ..................................................................... 20
WARRANTY .......................................................................... 22
RANGE SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
Tip Over Hazard A child or adult can tip the range and be killed. Verify the anti-tip bracket has been properly installed and engaged per installation instructions. Re-engage anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged. Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
WARNING
Anti-Tip Bracket
Range Foot
State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having the anti-tip bracket fastened down properly.
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow basic precautions, including the following:
WARNING:
THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR OR WALL, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.
CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.
Proper Installation – Be sure the range is properly installed
and grounded by a qualified technician. Never Use the Range for Warming or Heating the Room.
Do Not Leave Children Alone – Children should not be left
alone or unattended in area where the range is in use. They should never be allowed to sit or stand on any part of the range.
Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the range.
User Servicing – Do not repair or replace any part of the
range unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.
Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units. Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among those areas are the cooktop and surfaces facing the cooktop.
Use Proper Pan Size – The range is equipped with one or
more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner will also improve efficiency.
Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy spillovers that may ignite.
Make Sure Reflector Pans or Drip Bowls Are in Place –
Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
TO REDUCE THE RISK OF TIPPING OF
Protective Liners – Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in the manual. Improper installation of these liners may result in a risk of electric shock, or fire.
Glazed Cooking Utensils – Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service without breaking due to the sudden change in temperature.
Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.
Do Not Soak Removable Heating Elements – Heating
elements should never be immersed in water. Do Not Cook on Broken Cooktop – If cooktop should
break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.
Clean Cooktop With Caution – If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks – Always place oven racks in
desired location while oven is
cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns – among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.
For self-cleaning ranges –
Do Not Clean Door Gasket – The door gasket is essential
for a good seal. Care should be taken not to rub, damage, or move the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
For units with ventilating hood –
Clean Ventilating Hoods Frequently – Grease should not
be allowed to accumulate on hood or filter.
When flambeing foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
3
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked Questions (FAQs) section of our website at www.kitchenaid.com for more detailed instructions. In Canada, refer to the Customer Service Section at www.kitchenaid.ca.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press CLOCK
2. Press “3” for AM or “6” for PM.
3. Press the number keypads to set the time of day.
4. Press CLOCK or START.
OVEN LIGHT Oven cavity light While the oven doors are closed, press OVEN LIGHT to turn the lights on or off.
TIMER SET/OFF Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
OFF UPPER OFF LOWER
BAKE UPPER BAKE LOWER
Range function The upper and lower Off keypads stop any oven function except the Clock, Timer, and
Baking and roasting
The oven lights will come on when an oven door is opened.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min-min. Leading
zeros do not have to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER SET/Off to begin the countdown. If enabled, end-of-cycle tones
will sound at the end of countdown. The display will return to the time of day at end of countdown.
4. Press TIMER SET/OFF to cancel the Timer and return to the time of day.
Do not press the Off keypads because the oven will turn off.
pressing a keypad, the function is canceled and the time of day is displayed.
Control Lock in the selected oven.
1. Press BAKE for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take
effect.
5. Press OFF for the selected oven when finished.
4
KEYPAD FEATURE INSTRUCTIONS
BROIL UPPER BROIL LOWER
CONVECT BAKE
CONVECT ROAST
CONVECT BROIL
Broiling 1. Press BROIL for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START, and then allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven and leave the door open 4
at the broil stop position.
5. Press OFF for the selected oven when finished.
Convection cooking
1. Press CONVECT BAKE.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
Convection cooking
1. Press CONVECT ROAST.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
Convection cooking
1. Press CONVECT BROIL.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
1
/2" (11.4 cm)
EASY CONVECT
SLOW COOK UPPER SLOW COOK LOWER
Recipe conversion for convection cooking
NOTE: For best results, preheat your oven to the required temperature prior to using
EasyConvect™ Conversion. After preheating is complete, press the OFF LOWER key before using EasyConvect™ Conversion.
1. Press EASY CONVECT until the desired EasyConvect™ option is displayed (MEATS,
BAKED GOODS or OTHER).
2. Press START.
3. Press the number keypads to enter the standard cook temperature, and then press
START.
4. Enter the standard cook time, and then press START.
5. Place food in the oven at the appropriate time.
Check food doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See “Cook Time” section. At the end of the stop time, the oven will automatically turn off.
6. Press OFF LOWER when finished. Refer to the “EasyConvect™ Conversion” section for more information.
Slow cooking It is not necessary to preheat the oven.
1. Place food in the upper or lower oven.
2. Press SLOW COOK for the desired oven.
3. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
4. Press START.
5. Press OFF for the selected oven when finished.
5
KEYPAD FEATURE INSTRUCTIONS
BREAD PROOF Proofing bread 1. Press BREAD PROOF until the desired proof is displayed (“Standard Proof”
KEEP WARM UPPER
KEEP WARM LOWER
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function
COOK TIME Timed cooking Cook Time allows the oven to be set to turn on at a certain time of day, cook
Hold warm Food must be at serving temperature before placing it in the warmed oven.
or “Rapid Proof”).
NOTE: “Rapid” operates at a slightly higher temperature for second rise
of formed dough.
2. Press START. Let the dough rise until it is nearly doubled in size. Proofing time may vary
depending on dough type and quantity.
3. Press OFF LOWER when finished proofing. Refer to the “Proofing Bread” section for more information.
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature
entered is not in the range of the temperature allowed, the minimum or maximum temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. Press OFF for the selected oven when finished.
with a delayed start. Delay Start should not be used for foods such as breads and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
for a set length of time, and/or shut off automatically. To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
WARM ZONE
ON/OFF
SELF CLEAN Self-clean cycle See the “Self-Clean Cycle” section.
START CONTROL
LOCK hold 5 sec.
OPTIONS Oven use
Warming zone Press WARM ZONE ON to select the warming element on the cooktop.
Press START. Press WARM ZONE OFF to turn off the warming element.
Oven control lockout
functions
1. Check that the ovens and timers are off.
2. Press and hold START for 5 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCK” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.
Enables you to personalize the audible tones and oven operation to suit your needs. See the “Oven Use” section.
6
COOKTOP USE
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set to anywhere between “H” and “L”. Push in and turn to setting.
REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.
Ceramic Glass
The surface cooking area will glow red when an element is on. Some parts of the surface cooking area may not glow red when an element is on. This is normal operation. It will also randomly cycle off and back on again, even while on HIGH, to keep the cooktop from extreme temperatures.
It is normal for the surface of ceramic glass to appear to change color when the surface cooking areas are hot. As the glass cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting, abrasions, and to condition the glass surface. Ceramic glass cooktop cleaner and a cooktop scraper are also recommended for stubborn soils. Do not use abrasive cleaners, cleaning pads, or harsh chemicals for cleaning. The Cooktop Care Kit Part Number 31605 contains all of the items needed to clean and condition your ceramic glass cooktop. Refer to the “Range Care” section for additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface and to make soils easier to remove, clean the cooktop after each use to remove all soils.
■ Cooktops with an Even-Heat™ Ultra element provide
the best speed to boil and simmering performance for large pans. For pans 10" (25.4 cm) and larger, use the Even-Heat Ultra element at “Ultra Hi” setting for fastest boiling performance. For best low heat performance on pans 10" (25.4 cm) and larger, use the Even-Heat Ultra element at the “Even Heat Simmer” setting.
■ Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed, or dented bottoms could cause uneven heating and poor cooking results.
■ Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.
■ Cookware designed with slightly indented bottoms or small
expansion channels can be used.
■ Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits when heated.
■ Avoid storing jars or cans above the cooktop. Dropping
a heavy or hard object onto the cooktop could crack the cooktop.
■ To avoid damage to the cooktop, do not leave a hot lid on
the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.
■ For foods containing sugar in any form, clean up all spills
and soils as soon as possible. Allow the cooktop to cool slightly. Then, while wearing oven mitts, remove the spills using a scraper while the surface is still warm. If the sugary spills are allowed to cool down, they can adhere to the cooktop and can cause pitting and permanent marks.
■ To avoid scratches, do not slide cookware or bakeware
across the cooktop. Aluminum or copper bottoms and rough finishes on cookware or bakeware could leave scratches or marks on the cooktop.
■ Do not cook popcorn in prepackaged aluminum containers
on the cooktop. They could leave aluminum marks that can not be removed completely.
■ To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.
■ To avoid damage to the cooktop, do not use the cooktop
as a cutting board.
■ To avoid damage to the cooktop, do not cook food directly
on the cooktop.
Cooktop On Indicator Light
The Cooktop On indicator light is located on the console panel. When any control knob on the console panel is turned on, the Cooktop On indicator light will glow.
7
Loading...
+ 14 hidden pages