KitchenAid YKFED500ESS, YKFED500EBS, KFED500ESS, KFED500EWH, KFED500EBL Owner's Manual

ELECTRIC DOUBLE OVEN RANGE
USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. Register your new range at www.kitchenaid.com. In Canada, register your range at www.kitchenaid.ca.
For future reference, please make a note of your product model and serial numbers. These can be located on the serial plates. The serial plates are located behind the control panel. You may view them by rotating the serial plates up.
Model Number_______________________________________ Serial Number________________________________________
Para una versión de estas instrucciones en español, visite www.kitchenaid.com. Deberá tener los números de modelo y serie, que se pueden encontrar en las placas de serie detrás del panel de control. Los puede
ver al rotar hacia arriba las placas de serie.
Table of Contents
RANGE SAFETY ....................................................................... 2
The Anti-Tip Bracket ............................................................ 2
FEATURE GUIDE ..................................................................... 4
COOKTOP USE ....................................................................... 7
Cookware ............................................................................ 8
Home Canning .................................................................... 9
OVEN USE ............................................................................ 10
Electronic Oven Controls ................................................... 10
Keep Warm ......................................................................... 11
Sabbath Mode ................................................................... 11
Aluminum Foil .................................................................... 12
Positioning Racks and Bakeware ....................................... 12
Roll-Out Rack ..................................................................... 13
Oven Vents ......................................................................... 13
Baking and Roasting ......................................................... 13
Broiling ............................................................................... 14
Lower Oven Convection Cooking ....................................... 14
EasyConvect™ Conversion ............................................... 14
Slow Cook .......................................................................... 15
Proong Bread ................................................................... 15
Cook Time .......................................................................... 15
RANGE CARE ....................................................................... 16
Self-Cleaning Cycle ............................................................ 16
General Cleaning ................................................................ 17
Oven Lights ........................................................................ 18
Remove Oven Door(s) ......................................................... 18
TROUBLESHOOTING .......................................................... 19
ACCESSORIES ..................................................................... 21
WARRANTY .......................................................................... 22
RANGE SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
Tip Over Hazard A child or adult can tip the range and be killed. Verify the anti-tip bracket has been properly installed and engaged per installation instructions. Re-engage anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged. Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
WARNING
Anti-Tip Bracket
Range Foot
State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having the anti-tip bracket fastened down properly.
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow basic precautions, including the following:
WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR OR WALL, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.
CAUTION:
cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.
Proper Installation – Be sure the range is properly installed
and grounded by a qualified technician. Never Use the Range for Warming or Heating the Room.
Do Not Leave Children Alone – Children should not be left
alone or unattended in area where the range is in use. They should never be allowed to sit or stand on any part of the range.
Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the range. User Servicing – Do not repair or replace any part of the
range unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.
Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units. Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among those areas are the cooktop and surfaces facing the cooktop.
Use Proper Pan Size – The range is equipped with one or
more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner will also improve efficiency.
Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy spillovers that may ignite.
Make Sure Reflector Pans or Drip Bowls Are in Place –
Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
Do not store items of interest to children in
Protective Liners – Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in the manual. Improper installation of these liners may result in a risk of electric shock, or fire.
Glazed Cooking Utensils – Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service without breaking due to the sudden change in temperature.
Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.
Do Not Soak Removable Heating Elements – Heating
elements should never be immersed in water. Do Not Cook on Broken Cooktop – If cooktop should
break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.
Clean Cooktop With Caution – If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks – Always place oven racks in
desired location while oven is
cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns – among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.
For self-cleaning ranges –
Do Not Clean Door Gasket – The door gasket is essential
for a good seal. Care should be taken not to rub, damage, or move the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
For units with ventilating hood –
Clean Ventilating Hoods Frequently – Grease should not
be allowed to accumulate on hood or filter.
When flambeing foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
3
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked Questions (FAQs) section of our website at www.kitchenaid.com for more detailed instructions. In Canada, refer to the Customer Service Section at www.kitchenaid.ca.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press CLOCK
2. Press “3” for AM or “6” for PM.
3. Press the number keypads to set the time of day.
4. Press CLOCK or START.
OVEN LIGHT Oven cavity light While the oven doors are closed, press OVEN LIGHT to turn the lights on or off.
The oven lights will come on when an oven door is opened.
TIMER SET/OFF Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min-min. Leading
zeros do not have to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER SET/Off to begin the countdown. If enabled, end-of-cycle tones
will sound at the end of countdown. The display will return to the time of day at end of countdown.
4. Press TIMER SET/OFF to cancel the Timer and return to the time of day.
Do not press the Off keypads because the oven will turn off.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed.
OFF UPPER OFF LOWER
BAKE UPPER BAKE LOWER
Range function The upper and lower Off keypads stop any oven function except the Clock, Timer, and
Control Lock in the selected oven.
Baking and roasting
1. Press BAKE for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take
effect.
5. Press OFF for the selected oven when finished.
4
KEYPAD FEATURE INSTRUCTIONS
BROIL UPPER BROIL LOWER
CONVECT BAKE
CONVECT ROAST
CONVECT BROIL
Broiling 1. Press BROIL for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START, and then allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven and leave the door open 41/2" (11.4 cm)
at the broil stop position.
5. Press OFF for the selected oven when finished.
Convection cooking
Convection cooking
Convection cooking
1. Press CONVECT BAKE.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
1. Press CONVECT ROAST.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
1. Press CONVECT BROIL.
2. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
EASY CONVECT
SLOW COOK UPPER SLOW COOK LOWER
Recipe conversion for convection cooking
Slow cooking It is not necessary to preheat the oven.
NOTE: For best results, preheat your oven to the required temperature prior to using
EasyConvect™ Conversion. After preheating is complete, press the OFF LOWER key before using EasyConvect™ Conversion.
1. Press EASY CONVECT until the desired EasyConvect™ option is displayed (MEATS,
BAKED GOODS or OTHER).
2. Press START.
3. Press the number keypads to enter the standard cook temperature, and then press
START.
4. Enter the standard cook time, and then press START.
5. Place food in the oven at the appropriate time.
Check food doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See “Cook Time” section. At the end of the stop time, the oven will automatically turn off.
6. Press OFF LOWER when finished. Refer to the “EasyConvect™ Conversion” section for more information.
1. Place food in the upper or lower oven.
2. Press SLOW COOK for the desired oven.
3. Press the number keypads to set the desired temperature. If the temperature entered
is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
4. Press START.
5. Press OFF for the selected oven when finished.
5
KEYPAD FEATURE INSTRUCTIONS
BREAD PROOF Proofing bread 1. Press BREAD PROOF until the desired proof is displayed (“Standard Proof”
or “Rapid Proof”).
NOTE: “Rapid” operates at a slightly higher temperature for second rise
of formed dough.
2. Press START. Let the dough rise until it is nearly doubled in size. Proofing time may vary
depending on dough type and quantity.
3. Press OFF LOWER when finished proofing. Refer to the “Proofing Bread” section for more information.
KEEP WARM UPPER
KEEP WARM LOWER
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function
COOK TIME Timed cooking Cook Time allows the oven to be set to turn on at a certain time of day, cook
WARM ZONE
ON/OFF
SELF CLEAN Self-clean cycle See the “Self-Clean Cycle” section.
START CONTROL
LOCK hold 5 sec.
OPTIONS Oven use
Hold warm Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature
entered is not in the range of the temperature allowed, the minimum or maximum temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. Press OFF for the selected oven when finished.
with a delayed start. Delay Start should not be used for foods such as breads and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
for a set length of time, and/or shut off automatically. To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
Warming zone Press WARM ZONE ON to select the warming element on the cooktop.
Press START. Press WARM ZONE OFF to turn off the warming element.
Oven control lockout
functions
1. Check that the ovens and timers are off.
2. Press and hold START for 5 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCK” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.
Enables you to personalize the audible tones and oven operation to suit your needs. See the “Oven Use” section.
6
COOKTOP USE
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set to anywhere between “H” and “L”. Push in and turn to setting.
REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.
Ceramic Glass
The surface cooking area will glow red when an element is on. Some parts of the surface cooking area may not glow red when an element is on. This is normal operation. It will also randomly cycle off and back on again, even while on HIGH, to keep the cooktop from extreme temperatures.
It is normal for the surface of ceramic glass to appear to change color when the surface cooking areas are hot. As the glass cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting, abrasions, and to condition the glass surface. Ceramic glass cooktop cleaner and a cooktop scraper are also recommended for stubborn soils. Do not use abrasive cleaners, cleaning pads, or harsh chemicals for cleaning. The Cooktop Care Kit Part Number 31605 contains all of the items needed to clean and condition your ceramic glass cooktop. Refer to the “Range Care” section for additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface and to make soils easier to remove, clean the cooktop after each use to remove all soils.
■ Cooktops with an Even-Heat™ Ultra element provide
the best speed to boil and simmering performance for large pans. For pans 10" (25.4 cm) and larger, use the Even-Heat Ultra element at “Ultra Hi” setting for fastest boiling performance. For best low heat performance on pans 10" (25.4 cm) and larger, use the Even-Heat Ultra element at the “Even Heat Simmer” setting.
■ Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed, or dented bottoms could cause uneven heating and poor cooking results.
■ Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.
■ Cookware designed with slightly indented bottoms or small
expansion channels can be used.
■ Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits when heated.
■ Avoid storing jars or cans above the cooktop. Dropping
a heavy or hard object onto the cooktop could crack the cooktop.
■ To avoid damage to the cooktop, do not leave a hot lid on
the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.
■ For foods containing sugar in any form, clean up all spills
and soils as soon as possible. Allow the cooktop to cool slightly. Then, while wearing oven mitts, remove the spills using a scraper while the surface is still warm. If the sugary spills are allowed to cool down, they can adhere to the cooktop and can cause pitting and permanent marks.
■ To avoid scratches, do not slide cookware or bakeware
across the cooktop. Aluminum or copper bottoms and rough finishes on cookware or bakeware could leave scratches or marks on the cooktop.
■ Do not cook popcorn in prepackaged aluminum containers
on the cooktop. They could leave aluminum marks that can not be removed completely.
■ To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.
■ To avoid damage to the cooktop, do not use the cooktop
as a cutting board.
■ To avoid damage to the cooktop, do not cook food directly
on the cooktop.
Cooktop On Indicator Light
The Cooktop On indicator light is located on the console panel. When any control knob on the console panel is turned on, the Cooktop On indicator light will glow.
7
Hot Surface Indicator Light
On ceramic glass models, the Hot Surface indicator light is located on the console panel.
The Hot Surface indicator light will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area is turned off.
Triple Zone Element
The Triple Zone Element offers flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual and triple sizes combine single, dual, and outer elements and are recommended for larger size cookware, large quantities of food, and home canning.
A
B
A. Single B. Dual C. Triple
C
Even-Heat™ Ultra Element
The Even-Heat™ Ultra Element offers additional cooking flexibility. The Even-Heat™ Ultra Element can be used to boil liquids faster. The lowest setting can be used to prepare sauces and to keep foods at a low temperature. Use cookware appropriate in size for the Even-Heat™ Ultra Element.
Warm Zone Element
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
Use the Cooktop Warm Zone Element to keep cooked foods warm. One hour is the recommended maximum time to maintain food quality.
Do not use it to heat cold foods. The Warm Zone Element can be used alone or when any of the
other surface cooking areas are being used. The Warm Zone Element area will not glow red when cycling
on. However, the Cooktop On light will glow while the Cooktop Warm Zone Element is in use.
■ Use only cookware recommended for oven and cooktop use.
■ Cover all foods with a lid or aluminum foil. When warming baked goods, allow a small opening in the cover for moisture to escape.
■ To avoid damage to the cooktop, do not use plastic wrap to cover food because the plastic wrap may melt.
■ Use pot holders or oven mitts to remove food.
A
A. Lower heat option B. Rapid boil option
B
To Use:
1. To turn on, press WARM ZONE ON then START.
2. To turn off, press WARM ZONE OFF.
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element, or surface burner.
Ideal cookware should have a flat bottom, straight sides, and a well-fitting lid, and the material should be of medium-to-heavy thickness.
Rough finishes may scratch the cooktop. Aluminum and copper may be used as a core or base in cookware. However, when used as a base, they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.
Cookware with nonstick surfaces should not be used under the broiler.
8
Check for flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.
1
2
3
4
1
5
6
7
2
8
9
3
1 0
1 1
1 2
4
1 3
1 4
5
1 5
1 6
6
1 7
1 8
1 9
7
2 0
Use a flat-bottomed cookware for best cooking results and energy efficiency. The cookware should be about the same size as the cooking area outlined on the cooktop. Cookware should not extend more than 1/2" (1.3 cm) outside the area.
Use the following chart as a guide for cookware material characteristics.
Cookware Characteristics Aluminum Heats quickly and evenly.
■ Suitable for all types of cooking.
■ Medium or heavy thickness is best for most cooking tasks.
■ May leave aluminum residues, which may be diminished if cleaned immediately after cooking.
Cast iron ■ Heats slowly and evenly.
■ Good for browning and frying.
■ Maintains heat for slow cooking.
■ Rough edges or burrs may scratch the cooktop.
Ceramic or Ceramic glass
■ Follow manufacturer’s instructions.
■ Heats slowly but unevenly.
■ Ideal results on low to medium heat settings.
■ May scratch the cooktop.
Copper ■ Heats very quickly and evenly.
■ May leave copper residues, which may be diminished if cleaned immediately after cooking.
■ Can leave a permanent stain or bond to the cooktop if overheated.
Earthenware ■ Follow manufacturer’s instructions.
■ Use on low heat settings
■ May scratch the cooktop.
Porcelain enamel-on-steel or cast iron
■ See stainless steel or cast iron.
■ Porcelain enamel bakeware without the metal base may bond to the cooktop if overheated.
Stainless steel ■ Heats quickly, but unevenly.
■ A core or base of aluminum or copper on stainless steel provides even heating.
Home Canning
Canning can be performed on a glass smooth top cooking surface or traditional coil element cooktop. When canning for long periods, alternate the use of surface cooking areas or elements between batches. This allows time for the most recently used areas to cool.
■ Center the canner on the largest surface cooking area or element. On electric cooktops, canners should not extend more than 1/2" (1.3 cm) beyond the surface cooking area or element.
■ Do not place canner on 2 surface cooking areas or elements at the same time.
■ On ceramic glass models, use only at-bottomed canners to avoid damage to the cooktop and elements.
■ For more information, contact your local agricultural extension ofce, or refer to published home canning guides. Companies that manufacture home canning products can also offer assistance.
9
OVEN USE
Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.
Electronic Oven Controls
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.
Control Display
The display will light up when first powered up or after a power loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
■ Valid keypad press
■ Oven is preheated (long tone)
■ Kitchen timer (long tone with a reminder tone every 60 seconds).
■ Function has been entered
Three Tones
■ Invalid keypad press
Four Tones
■ End of cycle (with reminder tone every 60 seconds).
Use the Options keypad to change the tone settings.
Options
Many features of the oven control can be adjusted to meet your personal needs. These changes are made using the Options keypad.
Use the Options keypad to scroll through the features that can be changed. Each press of the Options keypad will advance the display to the next setting. After selecting the feature to be changed, the control will prompt you for the required input. Details of all the feature changes are explained in the following sections.
Press OFF UPPER or OFF LOWER to exit Options.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to Celsius.
1. Press OPTIONS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Audible Tones Display
Turn off all tones, including the end of cycle tone and key press tones.
1. Press OPTIONS until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press OPTIONS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
End of Cycle Tones
Activates or turns off the tones that sound at the end of a cycle.
1. Press OPTIONS until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press OPTIONS until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after the end of cycle tones.
1. Press OPTIONS until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
12/24 Hour Clock
1. Press OPTIONS until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120V power connection and permits the control features to be demonstrated without heating elements turning on. If this feature is activated, the oven will not work.
1. Press OPTIONS until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER of OFF LOWER to exit and display
the time of day.
10
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours after the oven initiates a cook or clean function. This will not interfere with any timed or delay cook functions.
1. Press OPTIONS until “12 HR AUTO OFF” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Keep Warm
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
Languages – Scrolling Display Text
Language options are English, Spanish, and French.
1. Press OPTIONS until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Energy Save
The Energy Save mode deactivates the display to reduce energy consumption.
1. Press OPTIONS until “ENERGY SAVE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide consistent temperature, but they may run slightly hot or cool at any point in time due to this cycling. Most thermometers are slow to react to temperature change and will not provide an accurate reading due to this cycling.
The oven provided accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature can be adjusted to personalize it for your cooking needs. It can be changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press OPTIONS until “TEMP CALIB” is displayed.
2. The current setting choice will be displayed. Press the “1”
keypad to toggle between the upper and lower ovens.
3. Press START to select the choice displayed in Step 2.
Wait 10 seconds for the display to change or press START, and then continue to step 4.
4. Press the “3”keypad to increase the temperature in 5°F
(3°C) increments, or press the “6” keypad to decrease the temperature in 5°F (3°C) increments. The range is from -30°F to +30°F (-18°C to +18°C).
5. Press START.
6. Press OFF UPPER or OFF LOWER to exit and display
the time of day.
IMPORTANT: Food must be at serving temperature before placing it in the warmed oven. Food may be held up to 1 hour; however, breads and casseroles may become too dry if left in the oven during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay at serving temperature.
To Use:
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
NOTE: The temperature may be changed at any time
by pressing the number keypads to enter the desired temperature and then START.
3. Press START.
4. Place food in the oven.
5. Press OFF for the selected oven when finished.
6. Remove food from oven. To Cancel Keep Warm Feature:
Press OFF for the desired oven. Remove food from oven.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting until turned off.
When Sabbath Mode is set, only the Bake cycle will operate. All other cooking and cleaning cycles are disabled. No tones will sound, and the displays will not indicate temperature changes.
When the oven door is open or closed, the oven light will not turn on or off, and the heating elements will not turn on or off immediately.
NOTE: Warm Zone is not available when Sabbath Mode is enabled.
To Enable Sabbath Mode Capability (One Time Only):
1. Press OPTIONS until “SABBATH” is displayed.
2. Press the “1” keypad. Sabbath Mode can be activated
for baking.
3. Press OFF UPPER or OFF LOWER to save the setting
and exit to display the time of day.
NOTE: to disable the Sabbath Mode, repeat steps
1 through 3 to change the status from “SABBATH ON” to “SABBATH OFF.”
To Activate Sabbath Mode:
1. Press bake for the desired oven.
2. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of temperatures allowed, the minimum or maximum temperature will be displayed. Enter a temperature in the allowable range.
3. Press START. For the timed cooking in Sabbath Mode, press COOK TIME,
and then press the number keypads to set the desired cook time. Press START.
11
4. (Optional) If Sabbath Mode is to be used for both ovens,
1
2
3
4
5
repeat steps 1 through 3 for the second oven.
5. Press OPTIONS. Three tones will sound. Then press “7.”
“SAb” will appear in the display.
To Adjust Temperature (when Sabbath Mode is running in only one oven):
1. Press the number keypad as instructed by the scrolling text
to select the new temperature. NOTE: The temperature adjustment will not appear on the display, and no tones will sound. The scrolling text will be shown on the display as it was before the keypad was pressed.
2. Press START.
To Adjust Temperature (when Sabbath Mode is running in both ovens):
1. Press BAKE for the desired oven.
2. Press the number keypad as instructed by the scrolling text
to select the new temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound. The scrolling text will be shown on the display as it was before the keypad was pressed.
3. Press START.
To Deactivate Sabbath Mode
Press OPTIONS, then press “7” to return to regular baking, or press OFF UPPER or OFF LOWER to turn off the oven(s).
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire rack with foil because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.
Racks
■ Position racks before turning on the oven.
■ Do not position racks with bakeware on them.
■ Make sure racks are level.
■ Place food so it will not rise into the broil element. Allow at least 1/2" (1.3 cm) between pans and the broil element.
To move a rack, pull it out to the stop position, raise the front edge, and then lift it out. Use the illustrations and charts as a guide for positioning racks.
Rack Positions – Upper Oven
2 1
Rack Positions – Lower Oven
Food Rack Position
Large roasts or poultry 1 Roasted meats 2 Most baked goods, casseroles 3 Broiled meats, poultry, fish 4 Broiling/searing meats, hamburgers,
steaks
For hamburger patties to have a well-seared exterior and a rare interior in the lower oven, use a flat rack in rack position 5. Side 1 should cook for approximately 21/2 to 31/2 minutes. Side 2 should cook for approximately 4 to 5 minutes. Expect a moderate degree of smoke when broiling.
5
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4 for regular baking with the roll-out rack in position 2.
2-rack (convection only): Use rack positions 2 and 4 for convection baking with the roll-out rack in position 2.
NOTE: The roll-out rack in the lower oven sits midway between adjacent rack positions. The roll-out rack should not be used in rack position 5.
Baking Layer Cakes in 2 Racks
For best results when baking cakes on 2 racks, use rack positions 1 (roll-out rack) and 4 (flat rack) with the Convection Bake function. Place the cakes on the racks as shown. If using two flat racks, use rack positions 2 and 4.
Baking Cookies on 2 Racks
For best results when baking cookies on 2 racks, use rack positions 1 (roll-out rack) and 4 (flat rack) with the Bake function. If using 2 flat racks, use rack position 2 and 4.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2" (5.0 cm) of space around bakeware and oven walls. Use the following chart as a guide.
Baking and Broiling Food Rack Position
All foods 1
Number of Pan(s) Position on Rack
1 Center of rack 2 Side by side 3 or 4 Refer to the previous illustration
12
Roll-out Rack
The roll-out rack allows easy access to position and remove food in the oven. The roll-out rack should not be used in rack position 5.
Open Position
A
B
A. Sliding rails B. Sliding shelf
Closed and Engaged Position
B
A
A. Slide rails B. Sliding Shelf
To insert Roll-out Rack
1. Angle rack assembly up, then insert into the “V” cutout
in the rack guides of the oven cavity.
2. Keep rack assembly lifted up at an angle, and then push
in to bypass the lower “V” cutout.
3. Gently slide rack assembly into oven, bypassing the “V”
cutouts.
A
B
A. “V” cutout B. Rack guides
To Remove Roll-out Rack
1. Push the sliding shelf in completely so that it is in the closed
and engaged position.
2. Using 2 hands, gently pull the sliding shelf and the slide rails
at the same time to the “V” cutout. Angle the rack so that the front is higher than the back, and gently pull rack past “V” cutout and then out of the oven.
To avoid damage to the sliding shelves, do not place more than 25 lbs. (11.4 kg) on the rack.
Do not clean the roll-out rack in the dishwasher. It may remove the rack’s lubricant and affect its ability to slide.
See the “General Cleaning” section for more information.
Oven Vents
A B
A. Upper oven vent B. Lower oven vent
The oven vents release hot air and moisture from the ovens, and should not be blocked or covered. Blocking or covering the vents will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper, or other items that could melt or burn near the oven vents.
Baking and Roasting
Preheating
When beginning a Bake, Convect Bake, or Convect Roast cycle, the oven will begin preheating after Start is pressed. The oven will take approximately 12 to 15 minutes to reach 350°F (177°C) with all of the oven racks provided with your oven inside the oven cavity. Higher temperatures will take longer to preheat. The preheat cycle rapidly increases the oven temperature. The actual oven temperature will go above your set temperature to offset the heat lost when your oven door is opened to insert food. This ensures that when you place your food in the oven, the oven will begin at the proper temperature. Insert your food when the preheat tone sounds. Do not open the door during preheat before the tone sounds.
Oven Temperature
While in use, the oven elements will cycle on and off as needed to maintain a consistent temperature, but they may run slightly hot or cool at any point in time due to this cycling. Opening the oven door while in use will release hot air and cool the oven which could impact the cooking time and performance. It is recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in the non-convention bake mode to improve performance.
Temperature Management System
The Temperature Management System electronically regulates the oven heat levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements or burners cycle on and off in intervals. On convection range models, the fan will run while preheating and may be cycled on and off for short intervals during bake to provide the best results. This feature is automatically activated when the oven is in use.
Before baking and roasting, position racks according to the “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat cycle to end before putting food in unless it is recommended in the recipe.
13
Broiling
When broiling, preheat the oven for 5 minutes before putting food in unless recommended otherwise in the recipe. Leave the desired oven door open 41/2" (11.4 cm) at the broil stop position to ensure proper broiling temperature. Position food on grid in a broiler pan, and then place it in the center of the oven rack.
NOTE: Odors and smoke are normal the first few times the oven is used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise control when cooking. The lower the broil setting, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish, and poultry may cook better at lower broil settings. Place the food in the upper or lower oven. Refer to the “Positioning Racks and Bakeware” section for more information.
On lower settings, the broil element will cycle off to maintain the proper temperature.
■ For best results, use a broiler pan and grid. It is designed to drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. Please refer to the “Accessories” section for more information.
Lower Oven Convection Cooking
In a convection oven, the fan-circulated hot air continually distributes heat more evenly than the natural movement of air in a standard thermal oven. This movement of hot air helps maintain a consistent temperature throughout the oven, cooking foods more evenly, crisping the surfaces while sealing in moisture and yielding crustier breads.
During the convection cooking, the bake, broil and convection (true convection only) elements cycle on and off in intervals to maintain the oven temperature, while the fan circulates the hot air.
If the oven door is opened during convection cooking, the fan will turn off immediately. It will come back on when the oven door is closed.
NOTE: The oven door must be closed for convection broiling.
Setting Guidelines CONVECT
BAKE CONVECT
BROIL
CONVECT ROAST
Reduce the standard baking temperature
25°F (12°C).
Use standard recipe temperature. Cooking
time may be reduced so the food should be checked for doneness early.
Use standard recipe temperature. Cooking
time may be reduced by 15 to 30% with Convect Roast so the food should be checked for doneness early.
Bow Tie True Convection with T.H.E.™ Element
True convection adds an electric element around the convection fan to enhance the cooking performance. Use the following Convect Options chart as a guide.
Setting Foods CONVECT
BAKE CONVECT
BROIL CONVECT
ROAST
Single or multiple-rack baking for cookies,
biscuits, breads, casseroles, tarts, tortes
Thicker cuts or unevenly shaped pieces
of meat, fish, or poultry
Whole chicken or turkey, vegetables, pork
roasts, beef roasts
EasyConvect™ Conversion
Convection cooking temperatures and times can differ from those of standard cooking. Depending upon the selected category, EasyConvect™ Conversion automatically reduces the standard recipe temperature and/or time you input for convection cooking.
Foods are grouped into 3 general categories. Choose the category most appropriate for the food to be cooked. Use the following chart as a guide.
Setting Foods MEATS Chicken: whole and pieces
Meat loaf, Roasts: pork, beef, and ham
(Turkey and large poultry are not included because their cook time varies.)
BAKED GOODS
OTHER Frozen convenience foods: french fries,
Biscuits, Breads: quick and yeast Cakes and Cookies Casseroles
nuggets, fish sticks, lasagna
Position the racks according to the “Positioning Racks and Bakeware” Section before starting convection cooking.
With convection cooking, most foods can be cooked at a lower temperature or for a shorter length of time. These adjustments can be made using the following chart or by using the EasyConvect™ Conversion feature on your range.
14
To Use:
NOTE: For best results, preheat your oven to the desired
temperature prior to using EasyConvect™ Conversion. After preheating is complete, press OFF LOWER before using EasyConvect™ Conversion.
1. Press EASY CONVECT until the desires option
(MEATS, BAKED GOODS, or OTHER) is displayed.
2. Press START.
3. Press number pad to enter standard cook temperature,
and then press START.
4. Press number pads to enter standard cook time, and then
press START.
5. Place the food in the oven. Check food for doneness before the stop time is reached.
If food will not be done when the stop time is reached, add more cooking time before time elapses. See “Cook Time” section. At the end of the stop time, the oven will automatically turn off.
6. Press OFF LOWER when finished.
7. Remove food from the oven.
Slow Cook
Slow Cook is best for food items such as beef, poultry, and pork. This cycle is available to cook food at low temperatures for long periods of time. Food can be cooked up to 12 hours depending on the temperature chosen.
Recommended Temperature Range:
4 hour cook time = 250°F to 300°F (120°C to 150°C) 8 hour cook time = 200°F to 250°F (93°C to 120°C) 12 hour cook time = 170°F to 226°F (77°C to 108°C)
■ Food should be completely thawed.
■ Cover food to keep moist.
■ Prior to Slow Roasting, meat can be pan seared or broiled on the sides to enhance browning, avor, and tenderness.
■ Use a at rack in position 3 for best results.
To Use Slow Cook:
Before using Slow Cook, see the “Positioning Racks and Bakeware” section. It is not necessary to preheat the oven.
1. Place food in the oven.
2. Press SLOW COOK for the desired oven.
3. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
4. Press START. “Preheating” will show in the display until the set
temperature is reached.
When a minimum oven temperature is reached, the oven
display will show the temperature increasing. A single tone will sound when the set temperature is reached.
5. Press OFF for the selected oven when finished.
Proofing Bread
Proofing bread prepares the dough for baking by activating the yeast. Follow the recipe directions as a guide. Standard Proof should be used for fresh dough, thawed dough, and for the first and second rise. Rapid Proof (on some models) operates at a slightly higher temperature than Standard Proof, and it can be used for the second rise of formed dough.
To Proof:
Before first proofing, place the dough in a lightly greased bowl and cover loosely with wax paper, coated with shortening. Place in position 2, and then close the oven door.
1. Press BREAD PROOF until the desired proof is displayed
(“Standrd” or “Rapid”).
2. Press START. Let the dough rise until nearly doubled in size. Proofing time
may vary depending on dough type and quantity.
3. Press OFF when finished proofing. Before second proofing, shape the dough, place it in baking
pan(s) and then cover loosely. Follow the same placements and control steps above. Before baking, remove the cover.
NOTE: If the oven temperature is greater than 120°F (49°C), the display will indicate “oven cooling” until the temperature is below 120°F (49°C).
Cook Time
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
To Set a Timed Cook:
1. Press the keypad for any cooking function except
Self-Clean, Bread Proof, or Keep Warm.
2. Press the number keypads to set the desired temperature.
If the temperature is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press COOK TIME.
4. Press the number keypads to enter the length of time
to cook.
5. Press START. The display will count down the time.
When the time ends, the oven will shut off automatically. The temperature and/or time setting can be changed at any time by repeating Steps 2 through 5.
6. Press OFF for the desired oven to clear the display.
To Set a Delayed Timed Cook:
1. Press DELAY START.
2. Press the number “1” or “2” keypad to select the desired
oven.
3. Press the number keypad to enter the number of hours and/
or minutes you want to delay the start time.
4. Press the keypad for any cooking function except Bread
Proof or Keep Warm.
5. Press the number keypads to choose the desired
temperature. If the temperature entered is not in the range of temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
6. Press START or COOK TIME.
7. Press the number keypads to enter the length of time
to cook.
8. Press START. When the start time is reached, the oven will automatically turn
on. The temperature and/or time settings can be changed after the delay countdown by repeating steps 1 through 7. When resetting the time and temperature, it is necessary to press Start between steps 4 and 5 to continue making changes.
When the set cook time ends, the oven will shut off automatically.
9. Press OFF for the desired oven to clear the display.
15
Loading...
+ 33 hidden pages