KitchenAid 5KST4054A Quick Reference Guide

GET COOKING
The 5KST4054A Stir Tower works like your own personal sous chef to help keep things moving, no matter what you are cooking.
For more information on getting the most from your Stir Tower see the included instructions or visit www.KitchenAid.com.au or www.KitchenAid.co.nz.
Use the side scraper attachment together with the flip-and-stir wand to help circulate ingredients thoroughly when preparing soups, stews, sauces, or larger quantities.
Use the flip-and-stir wand to prepare foods and ingredients such as onions, carrots, broccoli, potatoes (cubed), meatballs 40-60 g each), small to medium shrimp, and sliced or cubed meats and poultry.
Setting Speed RPMs Duration Optimal for:
0 OFF –– –– ––
2 MEDIUM 45 Constant ON Hot cereals, sauces
3 HIGH 75 Constant ON Puddings, yogurt
2-Minute Intermittent
20-Minute Intermittent
LOW 20 ON for 15 seconds
every 2 minutes
LOW 20 ON for 1 minute
every 20 minutes
Searing and sautéing
Slow cooking and stews
W10779894B
09/16
GET COOKING
QUICK START GUIDE
Follow these quick steps to get your Stir Tower set up and ready to go!
For additional operating and care information, refer to your instructions manual.
1.
Align pins on stir tower shaft with slots on and rotate counterclockwise to lock into place.
flip-and-stir wand
. Press up
3. Align back of Multi-Cooker with front
of Stir Tower. Lower Multi-Cooker onto easy connect power port on stir tower base.
2. Raise the stir arm by pressing down on
the release lever.
4. Place cooking pot in Multi-Cooker,
aligning the pouring spout with the stir arm. Lower stir arm until it locks into place.
5. Add ingredients to Multi-Cooker and
cover. Once cooking mode is set and started (see Multi-Cooker instructions), select desired stir speed or intermittent stir mode. Power on indicator will light.
6. Once cooking is complete, set the
Stir Tower to 0 (OFF). Press down on release lever and raise stir arm before removing cooking pot.
© 2016. All rights reserved.5KST4054A
Loading...