5KSM150PSP Series
5K45SSP Series
5KSM6583P Series
W11371189A.indd 1 6/6/2019 6:34:00 PM
PARTS AND FEATURES
TILT HEAD STAND MIXER PARTS AND ACCESSORIES
3
4
5
6
7
2
1
89
10
11
12
1 Motor Head (locking lever not shown)
2 Attachment Knob
3 Attachment Hub
4 Motor Head
5 Speed Control Lever
6 Beater Height Adjustment screw
(not shown)
7 Bowl Clamping Plate
13
8 Bowl**
9 Beater Shaft
10 Pouring shield*
11 3 L Stainless Steel Bowl*
12 Flat Beater
13 Flex Edge Beater*
14 Wire Whip
15 Dough Hook
14
15
*Included with select models only. Also available as an optional accessory.
**The bowl design and material depend on the Stand Mixer model.
2
W11371189A.indd 2 6/6/2019 6:34:01 PM
PARTS AND FEATURES
BOWL LIFT STAND MIXER PARTS AND ACCESSORIES
1
2
8
7
3
4
5
1 Motor Head
2 Speed Control Lever
3 Beater Height Adjustment screw
4 Bowl Support
5 Locating Pins
6 Stainless Steel Bowl**
7 Beater Shaft
8 Bowl Lift Lever (not shown)
10
9
6
9 Attachment Knob
10 Attachment Hub
11 Pouring Shield*
12 Flat Beater
13 Flex Edge Beater*
14 Wire Whip
15 Dough Hook
12
14
(see the “Optional Attachments”
section)
11
13
15
* Included with select models only. Also available as an optional accessory.
**Capacity and handle design vary by model.
3
W11371189A.indd 3 6/6/2019 6:34:02 PM
PRODUCT SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions. Misuse of appliance may result in personal injury.
2. To protect against risk of electrical shock, do not put Stand Mixer in water or
other liquid.
3. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the
appliance.
5. Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling or disassembling parts, and before cleaning. To unplug, grasp
the plug and pull from the outlet. Never pull from the power cord.
6. Avoid contacting moving parts. Keep hands, hair, and clothing, as well
as spatulas and other utensils, away from beater during operation to reduce
the risk of injury to persons and/or damage to the Stand Mixer.
7. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Contact
the manufacturer at their customer service telephone number for information
on examination, repair, or adjustment.
8. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
9. The use of accessories or attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury.
10. Do not use the Stand Mixer outdoors.
4
W11371189A.indd 4 6/6/2019 6:34:02 PM
PRODUCT SAFETY
11. Do not let the cord hang over the edge of table or counter.
12. Remove the beaters, wire whip, or dough hook from the Stand Mixer before
washing.
13. Do not leave the Stand Mixer unattended while it is operating.
14. Refer to the “Care and Cleaning” section for instructions on cleaning the
surfaces in contact with food.
15. This appliance is intended to be used in household and similar applications
such as:
- staff kitchen areas in shops, offices or other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
ELECTRICAL REQUIREMENTS
5KSM150PSP Series
Wattage: 300 W
Volts: 230V
Hertz: 60 Hz
5K45SSP Series
Wattage: 275 W
Volts: 230V
Hertz: 60 Hz
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
5KSM6583P Series
Wattage: 500 W
Volts: 230V
Hertz: 60 Hz
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician. Do
not modify the plug in any way. Do not
use an adapter.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or service technician
install an outlet near the appliance.
5
W11371189A.indd 5 6/6/2019 6:34:02 PM