5KCM0512A
PARTS AND FEATURES
PARTS AND ACCESSORIES
Scale readout display
Timer readout display
Plunger handle
Lid
Plunger
(stainless steel
mesh lter with
silicone seal
not shown)
Power button
Timer button
Scale button
Control panel
and LCD display
Dual-wall stainless
steel carafe
2 |
Soft touch
handle
Integrated scale
(not shown)
COFFEE MAKER SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against re, electric shock and injury to
persons do not immerse the Coffee Maker in water
or other liquid.
4. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by
a person responsible for their safety.
5. Children should be supervised to ensure that they
do not play with the appliance.
6. Allow to cool before putting on or taking off parts,
and before cleaning appliance.
7. Do not operate any appliance after the appliance
malfunctions, or has been damaged in any manner.
Return appliance to the nearest authorised service
facility for examination, repair, or adjustment.
8. Do not use outdoors.
9. Do not use near or on a hot gas or electric burner
stove, or in a heated oven.
10. Do not use the appliance for other than intended use.
11. Do not use the Coffee Maker without lid properly
closed.
12. Do not use the Coffee Maker with loose or
weakened handle.
13. Do not clean the Coffee Maker with abrasive cleaners,
steel wool, or other abrasive materials.
ENGLISH
SAVE THESE INSTRUCTIONS
COFFEE MAKER SAFETY | 3
COFFEE MAKER SAFETY
14. This product is designed for indoor household
use only. Not designed for commercial use.
15. Do not overll the Coffee Maker.
16. Pressing too fast or with more than 7 kg of force
can cause burns. Keep face away from top of press.
17. Use only coarse ground coffee. Fine grind can clog
the lter and create high pressure.
18. Place the Coffee Maker on a non-slip surface.
SAVE THESE INSTRUCTIONS
4 | COFFEE MAKER SAFETY
USING THE COFFEE MAKER
OPERATING THE PRECISION PRESS COFFEE MAKER
IMPORTANT: Before using the Precision Press Coffee Maker, wash all parts by
hand in hot, soapy water. Dry thoroughly. To avoid damage, do not wash in the
dishwasher and do not immerse in water.
Scoop coarsely ground coffee into
Press the POWER button to turn on
the Precision Press Coffee Maker.
The LCD display will read --- for a
1
few moments before changing to
0 G and 0:00 minutes when it is
ready to use.
the carafe. The scale will weigh
the coffee automatically. See
the “Coffee dosage guide” for
recommended coffee amounts.
2
To switch from grams to ounces,
press and hold the SCALE button
for 3 seconds. The LCD display
will switch from 0 G to 0.0 Oz.
ENGLISH
Press the SCALE button to tare
your measurement. To ensure scale
accuracy, slowly pour hot water
(91-96°C) into the carafe (allowing
sufficient time for scale to adjust).
3
Fill according to your desired
number of cups, the scale will
automatically measure the water to
help you get the right amount. Do
not fill past the MAX fill line.
Press the TIMER button. Gently stir
the coffee back and forth to “break
4
the crust.”
TIP: This step allows the coffee to
“bloom.” As the coffee grounds steep
in the water, a “crust” of grounds will
develop on top of the water. This is a
sign that the coffee is brewing properly.
USING THE COFFEE MAKER | 5
USING THE COFFEE MAKER
Slowly (10-15 seconds) and evenly
Place the lid on the carafe. Do not
press the plunger. Allow the coffee
to steep. A good starting point for
5
steep time is 4 minutes. Steep for
more or less time according to taste.
press the plunger down to separate
the grounds from the brewed coffee.
When pressing the plunger down,
6
ensure it is vertically positioned for
a cleaner brew. Immediately pour
your coffee, and enjoy!
NOTE: The scale measurement will
increase with time and temperature.
This is normal.
TIP: After brewing is complete and you have served the coffee, pull the
plunger up, so that it is not resting in the oily ground coffee. This will
assist the cleanup process.
TIP: For best pour, slightly lift the
plunger handle before serving.
COFFEE DOSAGE GUIDE
Use the integrated scale in your Precision Press Coffee
Maker and the chart below when lling it with coffee
grounds and water. Use coarse-ground coffee (see
picture to the left).
Example of recommended
coarsely ground coffee.
Cups Water oz.
(weight)
2 10 296
3 15 444
4 20 591
5 25
Water
grams
739
Coffee
grams
18
28
37
46 5
Approx. # of
level scoops
2
3
4
6 |
CARE AND CLEANING
REPLACING THE BATTERIES
The Precision Press Coffee Maker is powered by 2 AAA batteries (included).
To replace the batteries, use a Phillips-head screwdriver to access the battery
compartment on the bottom of your Coffee Maker.
ENGLISH
Flip the carafe over, and use a
Phillips-head screwdriver to remove
the screw on the compartment
1
cover. Lift the compartment cover
as shown.
Replace the 2 AAA batteries in the
compartment. Make sure to use
2
the screw when reattaching the
compartment cover.
CLEANING THE PRECISION PRESS COFFEE MAKER
IMPORTANT: It is critical to thoroughly clean the Precision Press Coffee Maker
after each use. The taste of your coffee can be impacted if the carafe and plunger
assembly is not thoroughly cleaned of all grounds, coffee oil residue, or soap after
each use.
Clean all parts of the Precision Press
Coffee Maker by hand only. Allow
all parts to cool then lift the plunger
lid while tilting to free it from the
carafe. Wash with a soft, damp cloth.
1
Dry thoroughly with a soft, dry cloth.
To avoid damage, do not wash in
the dishwasher and do not immerse
in water.
To prepare the plunger assembly
for cleaning, first hold the plunger
handle in one hand, and use
the other hand to twist the filter
2
disc assembly until it completely
separates from the plunger
and you can slide the filter disc
assembly and lid off.
CARE AND CLEANING | 7
CARE AND CLEANING
Next, gently lift the top of the filter
assembly to remove the mesh filter
disc and the rubber gasket. You will
have four separate parts to clean:
3
the filter top, the rubber gasket,
the mesh filter disc, and the filter
bottom.
To reassemble properly, make certain
that the rubber gasket is evenly
5
centered and fully seated in position
inside the filter disc assembly.
After removing the filter parts from
the plunger, wash each thoroughly
with a soft, damp cloth. Dry with
a soft, dry cloth. Make certain to
4
rinse all soap from the mesh filter
disc because any soap or coffee oil
residue left on the filter will impact
the flavour of your next brew.
8 | CARE AND CLEANING
TROUBLESHOOTING
If your Precision Press Coffee Maker
should fail to operate as expected,
please check the following:
- If coffee is too bold: Be sure to serve the
coffee immediately after your preferred
brew time is complete, or the coffee will
continue to extract, making it stronger.
Other possible xes: Grind your coffee
at a coarser grind level, and/or steep
for less time.
- If coffee is too weak: Either grind your
beans to a ner consistency or brew for
more time.
- If coffee tastes bitter or unpleasant
after use: Taste can be impacted if
the Precision Press Coffee Maker
isn’t thoroughly cleaned. Make certain
that all soap, grounds, and oily residue
is thoroughly rinsed off all parts after
each use. See the “Care and cleaning”
section for more information.
- If there’s too much resistance when
plunging your grind may be too ne.
- If there’s too little resistance when
plunging your grind may be too coarse.
Do not return the Precision Press Coffee
Maker to the retailer, as they do not
provide service.
ENGLISH
TROUBLESHOOTING | 9
W10781760A
Specications subject to change without notice.
© 2015. All rights reserved.
10/15
Loading...