2 HP 1200 CFM DUST COLLECTOR
INSTRUCTION MANUAL
2012
COPYRIGHT
©
MODEL: KC-3109C
RIGHTS RESER
ALL
VED BY
KING CANADA
OOLS INC.
T
WARRANTY INFORMATION
-YEAR
2
IMITED WARRANTY
L
OFFERS A 2-YEAR LIMITED WARRANTY
FOR THIS 2 HP DUST COLLECTOR
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
Replacement parts for this product are available at our authorized King Canada service centers across Canada.
LIMITED TOOL WARRANTY
King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the
original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from
defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence
or accidents, repairs done by an unauthorized service center, alterations and lack of maintenance. King Canada shall in no event be
liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.
To take advantage of this limited warranty, return the product at your expense together with your dated proof of purshase to an
authorized King Canada service center. Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our
authorized service centers. In cooperation with our authorized serviced center, King Canada will either repair or replace the product if
any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the
warranty period.
ING CANADA TOOLS
K
FOR COMMERCIAL USE.
NOTE TO USER
This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.
KING CANADA
INC. DORVAL, QUÉBEC, CANADA H9P 2Y4
www.kingcanada.com
GENERAL SAFETY INSTRUCTIONS
FOR POWER TOOLS
1. KNOW YOUR TOOL
Read and understand the owners manual and labels affixed to
the tool. Learn its application and limitations as well as its
specific potential hazards.
2. GROUND THE TOOL.
This tool is equipped with an approved 3-conductor cord and
a 3-prong grounding type plug to fit the proper grounding type
eceptacle. The green conductor in the cord is the grounding
r
NEVER connect the green wire to a live terminal.
wire.
3. KEEP GUARDS IN PLACE.
Keep in good working order, properly adjusted and aligned.
4. REMOVE
Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
5. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents. Make sure the
floor is clean and not slippery due to wax and sawdust buildup.
6. AVOID DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations or expose
them to rain. Keep work area well lit and provide adequate
surrounding work space.
7. KEEP CHILDREN AWAY.
All visitors should be kept a safe distance from work area.
8. MAKE WORKSHOP CHILD-PROOF.
-with padlocks, master switches or by removing starter keys.
9. USE PROPER SPEED.
A tool will do a better and safer job when operated at the
proper speed.
10. USE RIGHT TOOL.
Don’t force the tool or the attachment to do a job for which it
was not designed.
11. WEAR PROPER APPAREL.
Do not wear loose clothing, gloves, neckties or jewelry (rings,
watch) because they could get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering
to contain long hair. Roll up long sleeves above the elbows.
ADJUSTING KEYS AND WRENCHES.
12. ALWAYS WEAR SAFETY GLASSES.
Always wear safety glasses (ANSI Z87.1). Everyday
eyeglasses only have impact resistant lenses, thet are NOT
safety glasses. Also use a face or dust mask if operation is
dusty.
13. DON’T OVERREACH.
Keep proper footing and balance at all times.
4. MAINTAIN TOOL WITH CARE.
1
Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
15. DISCONNECT TOOLS.
Before servicing, when changing accessories or attachments.
16. AVOID ACCIDENTAL STARTING.
Make sure the swich is in the ‘’OFF’’ position before plugging
in.
17. USE RECOMMENDED ACCESSORIES.
Consult the manual for recommended accessories. Follow the
instructions that accompany the accessories. The use of
improper accessories may cause hazards.
18. NEVER STAND ON TOOL.
Serious injury could occur if the tool tips over. Do not store
materials such that it is necessary to stand on the tool to reach
them.
19. CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other parts that are
damaged should be carefully checked to ensure that they will
operate pro- perly and perform their intended function. Check
for alignment of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard or
other parts that are damaged should be properly repaired or
replaced.
20. NEVER LEAVE MACHINE RUNNING
UNATTENDED.
Turn power ‘’OFF’’. Don’t leave any tool running until it comes
to a complete stop.
SPECIFIC SAFETY INSTRUCTIONS
FOR YOUR DUST COLLECTOR
ARNING:To reduce the risk of fire, electric shock or injury:
W
1) Read and understand this owners manual and all the labels on the
dust collector before operating. Use only as described in this
manual. To avoid personal injury or damage to your dust collector,
use only recommended accessories.
Sparks inside the electrical parts can ignite flammable vapors or dust.
To avoid fire or explosion:
2) Do not vacuum or use this dust collector near flammable or
combustible liquids, gases, gasoline or other fluels, lighter fluid,
cleaners, oil-based paints, natural gas, hydrogen, or explosive
dusts like coal dust, magnesium dust, grain dust or gun powder.
Do not vacuum anything that is burning or smoking,
3)
matches or hot ashes.
4) To avoid health hazards from vapors and dust, do not vacuum toxic
materials.
5) Do not use or store near hazardous materials.
6) Do not use outdoors or on wet surfaces.
7) Place dust collector on a stable, level surface.
8) Keep vacuum hose and electric cord out of traffic areas.
9) Do not let the dust collector be used as a toy. Close attention is
necessary when used by or near children.
10) Do not leave the dust collector plugged in. Unplug from the
outlet when it is not in use and before servicing.
such as cigarettes,