Kicker PS52504 Owner's Manual
PS COAXIALS
PS5250 | PS52504
English Version
Versión Español
Altavoces Coaxiales PS
LIVIN’ LOUD
Deutsche Version
PS Koaxial-Lautsprecher
Version Francaise
Haut-parleurs Coaxiale PS
2010 PS52504 RevA.indd 12010 PS52504 RevA.indd 1 9/15/2010 9:52:11 AM9/15/2010 9:52:11 AM
PS COAXIAL SPEAKERS
Owner’s Manual
Authorized KICKER Dealer:
Purchase Date:
PERFORMANCE
2 3/16"
Woofer Size 5-1/4” [133mm]
Tweeter Size 3/4” [20mm]
Frequency Response 60Hz–20kHz
Max Amplifi er Power 100W PEAK | 50W RMS
Sensitivity [1W/1m] 88.3dB
Nominal Impedance 2 Ω(PS5250), 4 Ω(PS52504)
Weight 12.6oz [358g]
Mounting Hole Diameter 4-7/8” [124mm]
Mounting Depth 2-3/16” [56mm]
2 Ω PS5250 2006–present Harley-Davidson® with premium audio system and similar touring bikes
4 Ω PS52504 1998–2005 Harley-Davidson with premium audio system [Road Glide may require Harley-
Davidson parts 77021-98B and 77022-98B
2008–present Victory
Please refer to your bike’s factory service manual for dissassembly/installation information. Typically, you should
retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The following
diagrams show how to install the PS5250 speakers in a Harley-Davidson bike with “batwing” style fairing (2006–
present). Note: Do not install in systems that are not 2-ohm stable!
4 7/8"
124mm
56mm
9/16"
14mm
]
1. Remove front side of fairing.
1
2
2010 PS52504 RevA.indd 22010 PS52504 RevA.indd 2 9/15/2010 9:52:34 AM9/15/2010 9:52:34 AM
2
3
4
5
PS COAXIALS
7 x Torx T25
6
7
2. Remove factory speakers.
Remove the factory speaker connectors.
Retain the 3 factory screws.
Remove the factory speakers from the factory angle mount (be careful not to damage the angle mount).
[ viewed from front of bike ]
factory speaker location
factory speaker connectors
3. Prepare PS5250 for installation.
Install the KICKER badges onto the grilles; bend the rear posts to secure them in place.
For Harley “batwing” installations, replace the factory grilles with KICKER grilles.
For all other Harley applications, use the factory grilles only.
recommended
badge location
factory screws x 3
KICKER PS5250
KICKER grille
factory grille
(remove for “batwing” only)
factory angle
mount
install short screw at
bottom
4. Install PS5250 in factory location.
Use the 3 factory screws.
Connect the factory speaker connectors to the PS5250 terminals.
Re-install your bike’s front fairing in the reverse order you disassembled it.
3
2010 PS52504 RevA.indd 32010 PS52504 RevA.indd 3 9/15/2010 9:52:34 AM9/15/2010 9:52:34 AM
Distribuidor autorizado de KICKER:
Fecha de compra:
ALTAVOCES COAXIALES PS
Manual del propietario
Woofer 5-1/4” [133mm]
Tweeter 3/4” [20mm]
Respuesta de Frecuencias 60Hz–20kHz
Procesamiento de Potencia
Máxima
Sensibilidad [1W/1m] 88.3dB
Impedancia Nominal 2 Ω(PS5250), 4 Ω(PS52504)
Peso 12.6oz [358g]
Diámetro del Orifi cio de Montaje 4-7/8” [124mm]
Profundidad de Montaje 2-3/16” [56mm]
2 Ω PS5250 2006–presente Harley-Davidson ® con sistema de audio premium y motocicletas
similares
4 Ω PS52504 1998–2005 Harley-Davidson, con sistema de audio premium [Road Glide puede requerir
de Harley-Davidson partes 77021-98B y 98B-77022]
2008–presente Victory
Por favor, consulte al servicio de la fábrica de desmontaje manual de tu moto / Información de la instalación.
Normalmente, se deben conservar todos los tornillos de fábrica, de hardware, y rejas al actualizar su motocicleta
a un sistema de Kicker. Los siguientes diagramas muestran cómo instalar los altavoces PS5250 en una
motocicleta Harley-Davidson con “alas de murciélago” estilo carenado (2006 y posteriores). Nota: El PS5250
es un altavoz de 2 ohmios. No instalar en sistemas que no son estables a 2 ohmios!
100W PICO | 50W RMS
4 7/8"
124mm
2 3/16"
56mm
9/16"
14mm
1. Eliminar parte frontal de carenado.
1
2
3
7 x Torx T25
4
5
4
2010 PS52504 RevA.indd 42010 PS52504 RevA.indd 4 9/15/2010 9:52:37 AM9/15/2010 9:52:37 AM
ALTAVOCES COAXIALES PS
6
7
Loading...