specifications
8590EM
EMC Analyzers
Frequency specifications
Frequency range
HP 8591EM 9 kHz to 1.8 GHz
HP 8593EM 9 kHz to 22 GHz
Option 026 9 kHz to 26.5 GHz (APC 3.5)
Option 027 9 kHz to 26.5 GHz (Type N)
HP 8594EM 9 kHz to 2.9 GHz
HP 8595EM 9 kHz to 6.5 GHz
HP 8596EM 9 kHz to 12.8 GHz
Frequency reference
Standard Option 004
Aging rate ±2 x 10
–6
/year ±1 x 10–7/year
Temperature stability ±5 x 10
–6
±1 x 10
–8
Initial achievable accuracy±5 x 10
–6
±2.2 x 10
–8
Frequency readout accuracy
(start, stop, center, marker)
±(Frequency readout x frequency
reference error + span accuracy
+ 1% of span + 20% RBW
+100 Hz x N*)
* N = the LO harmonic number
Marker counter accuracy
Frequency span
≤10 MHz x N* ±(Marker frequency x frequency
reference error + counter
resolution + 100 Hz x N*)
Frequency span
> 10 x N* ±(Marker frequency x frequency
reference error + counter
resolution + 1 kHz x N*)
Frequency sweep time
Span 0 Hz, >1 kHz 20 µs to 100 s
Span 0 Hz (Option 101) 20 µs to 100 s
Resolution bandwidths
30 Hz to 3 MHz (1, 3, 10
sequence)
200 Hz, 9 kHz, 120 kHz and
1 MHz (6dB) EMI bandwidths
Accuracy ±10 %
Video bandwidth range
1 Hz to 1 MHz in 1, 3, 10
sequence
Comb generator
HP 8593EM, 8596EM 100 MHz fundamental frequency
Accuracy ± .007 %
Span accuracy
Span ≤ 10 MHz ±2 % of span
Span > 10 MHz ±3 % of span
HP 8591EM, HP 8593EM,
HP 8594EM, HP 8595EM,
HP 8596EM, HP 84100EM,
and HP 84110EM
HP 8590EM Series EMC Analyzers and
Precompliance Systems
Amplitude Specifications
Amplitude range
Displayed average noise level to + 137 dBµV
Maximum safe input level
(input attenuator set at ≥10 dB)
Average continuous power +30 dBm
Peak pulse power
HP 8591EM +30 dBm
HP 8593EM, 8594EM, +50 dBm <10 µs 1 %
8595EM and 8596EM duty cycle ≥30 dB
input attenuation
DC
HP 8591EM 25 Vdc
HP 8593EM 0 Vdc
HP 8594EM, 8595EM 0 Vdc (dc coupled)
8596EM 50 Vdc (ac coupled)
Displayed average noise level
400 kHz to 1 GHz 30 Hz RBW 1 kHz RBW
HP 8591EM –23 dBµV –8 dBµV
HP 8593EM –20 dBµV –5 dBµV
HP 8594EM
400 kHz to 5 MHz –15 dBµV 0 dBµV
5 MHz to 1 GHz –20 dBµV –5 dBµV
HP 8595EM –18 dBµV –3 dBµV
HP 8596EM –18 dBµV –3 dBµV
Frequency response
9 kHz to 1 GHz
HP 8591EM, 8593EM, ±1.5 dB
8594EM, 8595EM
and 8596EM
Calibrator output
300 MHz –20 dBm ±.4 dB
Option specifications
Option 010 tracking generator
Frequency range
HP 8591EM 100 kHz to 1.8 GHz
HP 8593EM, 8594EM, 9 kHz to 2.9 GHz
8595EM and 8596EM
Output level
HP 8591EM 0 to –70 dBm
HP 8593EM, 8594EM, –1 to –66 dBm
8595EM and 8596EM
Output flatness
HP 8591EM ±1.75 dB
HP 8593EM, 8594EM, ±2.0 dB
8595EM and 8596EM
Weight
HP 8591EM 14.5 kg (32 lbs)
HP 8593EM, 8594EM, 16.4 kg (36 lbs)
8595EM and 8596EM
Input/Output
Front panel connectors
Input 50 Ω type N
Option 026 APC 3.5 mm male
Option 027 50 Ω type N female
Cal output 50 Ω BNC –20 dBm 300 MHz
Comb out 100 MHz ±0.007 %, SMA
Probe power +15 Vdc, –12.6 Vdc and Gnd
(150 mA max each)
Rear panel connectors
Earphone 1/8 inch monaural jack
Interface HP-IB and parallel
Keyboard 5 pin DIN, HP C1405 Option ABA
and Option 003 IBM AT
keyboard compatible
High sweep in/out BNC, high TTL = sweep
Aux video out 50 Ω BNC, 0-1 V
Aux IF output 50 ΩBNC, –10 tp 60 DBM, 21.4 MHz
Ext. trigger input BNC TTL levels, positive edge trigger
Ext. ref. in 50 Ω BNC, 10 MHz, –2 to + 10 dBm
10 MHz ref. output 50 ΩBNC, 10 MHz, 0 dBm
Aux interface 9 pin “D” subminiature
Monitor out 50 Ω BNC, NTSC, 15.75 kHz,
60 Hz or PAL, 15625 kHz, 50 Hz
Loading...