KETTLER ERGOCOACH 07985-800 User Manual

Montageanleitung für Rudergerät

„ERGOCOACH”

Art.-Nr. 07985-800

Der Umwelt zuliebe: Wir drucken auf 100% Altpapier!

PL

I

E

NLFGB

D

Abb. ähnlich

3

CH

A

D

Before assembling or using the unit, please read the following instructions carefully. They contain important informa­tion for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe
place for maintenance purposes or for ordering spare parts.

Assembly Instructions

GB

4

Assembly Instructions

GB

For Your Safety

■ The unit should be used only for its intended purpose, i.e. for

physical exercise by adult persons.

■ Any other use of the equipment is prohibited and may be dan-

gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.

■ This unit has been designed in accordance with the latest stan-

dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.

■ Incorrect repairs and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety of the
user.

■ Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.

■ If the equipment is in regular use, check all its components

thoroughly every 1 – 2 months. Pay particular attention to the
tightness of bolts and nuts.This applies especially to the securing
bolts for saddle and handelbars.

■ To ensure that the safety level is kept to the highest possible stan-

dard, determined by its construction, this product should be ser­viced regulary (once a year) by specialist retailers.

■ Instruct persons using the equipment (in particular children) on

possible sources of danger during exercising.

■ The unit requires a power supply of 220-230 V/50 Hz. It

should be connected only to a safety socket with a single 10-A
fuse. Before commissioning the appliance pay attention to the
fact that the correct plug-in power supply unit (observe marking)
has been connected properly.

■ Important: Do not under any circumstances carry out electrical

repairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.

■ Important: disconnect the apparatus from the mains before

doing repair, maintenance or cleaning work.

■ Do not use a multiple power socket for the running belt. If an ex-

tension cable is being used, ensure that it complies with the VDE
regulations.

■ When the unit is not in use, unplug it from the power supply.

■ Ensure that the power cable is not pinched and that no-one can

trip over it.

■ All electric appliances emit electromagnetic radiation when in

operation. Please do not leave especially radiation-intensive ap­pliances (e.g. mobile telephones) directly next to the cockpit or
the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).

■ Before beginning your program of exercise, consult your doctor

to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!

■ Any interference with parts of the product that are not descri-

bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be car­ried out by KETTLER service staff or qualified personnel trained
by KETTLER.

■ Always observe the general safety rules and precautions for

working with electrical equipment.

■ Before beginning your program of training, study the instruc-

tions for training carefully.

■ Our products are subject to a constant innovative quality assu-

rance. We reserve the right to perform technical modifications.

■ In case of enquiry, please contact your KETTLER dealer.

■ Attention! The unit should be positioned in such a way that the-

re is a space of 100 cm on both sides and 150 cm behind it.

Handling the equipment

■ Before using the equipment for exercise, check carefully to en-

sure that it has been correctly assembled.

■ It is not recommended to use or store the apparatus in a damp

room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.

■ The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpre­dictably and dangerous situations may occur for which the ma­nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.

■ The unit complies with the EN 975-1 +A1:1998; EN 975-

7:1998, class SA.

■ The appliance has undergone Class S (= studio) testing. If the

appliance is not intended for domestic use, please note that the
onus is on the owner to ensure that the appropriate measures
are put in place with respect to accessibility and supervision.
The appliance may only be operated in public places under
qualified supervision. The scope of such supervision shall de-

pend on who the users are: their degree of reliability, age, ex­perience, etc.

■ Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

■ A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect upon
operation.

■ The unit has a magnetic brake system.

■ The equipment is independent of revolutions per minute.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

■ Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

■ Always wear suitable shoes when using.

■ Do not use corrosive or abrasive materials to clean the equip-

ment. Ensure that such materials are not allowed to pollute the
environment.

■ The product is not suitable for use by persons weighing over

130 kg.

Instructions for Assembly

■ Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the dia­grams. The correct sequence is given in capital letters.

Assembly Instructions

GB

List of spare parts

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro­duct (see spare parts drawing).

Example order: Art. no. 07985-800 / spare-part no. 10100016

/ 2 pieces / S/N......

Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words „with

fastening material“.

KETTLER GB Ltd. · KETTLER House, Merse Road · North

Moons Moat · Redditch, Worcestershire B98 9HL
KETTLER International Inc. · P.O. Box 2747 · Virginia Beach,

VA 23450-2747

http://www.kettler.net

USA

GB

Waste Disposal

KETTLER products are recyclable. At the end of its use­ful life please dispose of this article correctly and sa­fely (local refuse sites).

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if
possible technically talented.

■ Please note that there is always a danger of injury when wor-

king with tools or doing manual work. Therefore please be ca­reful when assembling this machine.

■ Ensure that your working area is free of possible sources of

danger, for example don’t leave any tools lying around. Al­ways dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if child­ren play with plastic bags!

■ The fastening material required for each assembly step is sho-

wn in the diagram inset. Use the fastening material exactly as

instructed. The required tools are supplied with the equipment.

■ Bolt all the parts together loosely at first, and check that they

have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla­ced.

■ For technical reasons, we reserve the right to carry out prelimi-

nary assembly work (e.g. addition of tubing plugs).

■ Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary.

15

1

1

1

13x410mm

13x310mm

M6x90

M8x45

M5x40

ø12

ø16 (M6)

ø25

110mm

40mm

ø20x10mm

1

2

1

1

2

4

2

2

2

4

1

1

1

1

1

1

1

1

1

M8

M5

M6

1

1

ø16 (M8)

2

ø16

ø6,3

ø16

ø8,3

Checkliste (Packungsinhalt)

Checklist (contents of packaging)

Liste de vérification (contenu de l’emballage)

Checklijst (verpakkingsinhoud)

Lista de control (contenido del paquete)

Lista di controllo (contenuto del pacco)

Lista kontrolna (zawartość opakowania)

GB

F

NL

E

I

PL

16

5 6

3 4

M6x90

ø16

M6

ø20x10mm

M5

ø12

M5x40

ø16

ø25

ø25

ø13x410mm40mm 40mm M8M8

1 2

M8x45

ø25

ø16

ø16

A

ø13x310mm110mm 110mm M8M8

17

Handhabungshinweis

Handling

Indication relative à la manipulation

Bedieningsinstruktie

Instrucciones de manejo

Avvertenze per il maneggio

Wskazówki obsługowe

GB

F

NL

E

I

PL

Gehört nicht zum Lieferumfang.
Not included.
Ne fait pas partie du domaine de livraison.
Is niet in de levering ingesloten.
No forma parte del volumen de entrega.
Non in dotazione alla fornitura.

Nie należy do zakresu dostawy.

PLIE

NL

F

GB

D

ERGO KONZEPT

Achtung! Betrieb nur mit mitgeliefertem Original-Netzteil oder
Original-KETTLER-Ersatzteil (siehe Ersatzteilliste) zulässig. An­sonsten Gefahr der Beschädigung.

Attention! Only use with original power unit as supplied, or
with original KETTLER spare part (see spare part list). Other­wise this may result in damage.

Attention ! Exploiter uniquement l’appareil avec son bloc sec-

teur original qui fait partie de la fourniture ou une pièce de
rechange originale de KETTLER (voir liste des pièces de
rechange). Sinon risque de détérioration.

Let op! Gebruik alleen toegestaan met de bijgeleverde orgi­nele transformator of orgineel KETTLER-onderdeel (zie onder­delenlijst). Anders gevaar voor beschadiging.

NL

F

GB

D

¡Atención! Funcionamiento solamente autorizado con la fu-

ente de alimentación original suministrada o con pieza de
recambio original de KETTLER (ver lista de piezas de recam­bio). De lo contrario podría ocasionar daños.

Attenzione! L’utilizzo è consentito soltanto con l’alimentatore
originale fornito in dotazione oppure con parte di ricambio
originale della KETTLER (vedasi lista delle parti di ricambio).

Altrimenti sussiste il rischio di danneggiamenti.

Uwaga! Eksploatacja urządzenia jest możliwa tylko z dost­arczonym oryginalnym zasilaczem lub z oryginalnym ur­ządzeniem zastępczym marki KETTLER (patrz ? Lista części
zamiennych). W przeciwnym razie istnieje ryzyko uszkodze-

nia.

PL

I

E

18

444243235169 4029

Ersatzteilzeichnung

55

68

66

59

63

19

16

18

64 58

27

67

52545351704941575613

71

37

34
48

35
46

36
47

38

61 60 50

39

33 31 32 30 45

14

15

18

17

19

63

12

2 20 1 28 26 65 25

5

11910768

4

21

23 3

24

22

19

Teil Bezeichnung Stück Ersatzteil-Nr.
Nr. für 07985-800

1Tragbalken 1260 mm 1 94314240
2 Einschubblech 3 97200160
3 HD-PE Distanzröllchen 20x6.4x10 mm 4 10108032
4 Fahrwagen 1 94316773
5 Sitz 1 72591160
6 Laufrolle 4 94313784
7 Gleitbuchse 3476 4 70132682
8 Bolzen M8x42 mm 4 11300087

9 Paßscheibe 12x18x1 DIN988 4 10500077
10 Hülse 16x1.5x12.5 A652 4 97200579
11 Rollsitzunterverkleidung 3588 1 70132176
12 Spreizniet 6x9,5 4 10418503
13 Polsterplatte 1 94316200
14 Aufnahme für Polsterplatte 2 70132681
15 Filzplatte 2 12510006
16 Fußabstützung rechts 3594 1 70132177
17 Fußabstützung links 3595 1 70132178
18 Gurtband mit Schnalle 2 91270014
19 Bodenschoner 1696 2 70127930
20 Seilabdeckung 1 94314238
21 Standfuß 1 94316772
22 Bodenschoner 0738 1 70132175
23 Seilrolle Nr. 4 3 98585016
24 Abschlusskappe 2402 1 70132157
25 Trittplatte 1 94314110
26 Bodenrohr 1 91111287-40
27 Fuß rechts (mit Rolle und Schoner, kpl. montiert) 1 91170387
28 Fuß links (mit Rolle und Schoner, kpl. montiert) 1 91170388
29 Gehäuseeinheit 1 94316771
30 Distanzrohr 13x2.4x33.5 A687 1 97200589
31 Distanzrohr 13x2.4x70.5 A909 1 97201475
32 Seilrolle Nr. 1 1 98585018
33 SKT-Schraube M8x140 1 10206086

Ersatzteilzeichnung und –liste

Spare parts drawing and list

Dessin et liste des pièces de rechange

Reserveonderdeeltekening en –lijst

Designación y lista de las piezas de recambio

Disegno ed elenco dei pezzi di ricambio

Rysunek i lista części zamiennych

GB

F

NL

E

I

PL

HEINZ KETTLER

GmbH & Co. KG

D-59463 Ense-Parsit

Trainingsgerät nach

DIN EN 957-1, 5

Nicht für therapeutische Zwecke geeignet

Art.-Nr. 07961-800

Serien-Nr.: 1-334 O - 1801 00001

max Belastung 130 kg

Made in Germany

Typenschild – Seriennummer
Type label – Serial number
Plaque signalétique – Numèro de serie
Typeplaatje – Seriennummer
Placa identificativa – Número de serie

12345

Targhetta tecnica – Numero di serie
Tabliczka identyfikacyjna – Numer serii

Teil Bezeichnung Stück Ersatzteil-Nr.
Nr. für 07985-800

34 Aufnahmeblech für Platine 1 97201959
35 Aufnahmewinkel Bd 1303 1 97200243
36 Steuerung für Magnetspule 1 42860011
37 Befestigungswinkel Gehäuseeinheit 1 97003141
38 Kontakthalteblech Bd795 1 97200127
39 Geschwindigkeitsabnehmer S-20/ 500 (SPU) 1 67000670
40 Schnittstelle 750 mm 1 67000860
41 Schwungrad montiert (kpl. mit Seilen) 1 94316206
42 Griffrohr 1 91210359-40
43 Soft-Grip 1 10118117
44 Lamellenstopfen ø 30 mm schwarz 2 10100149
45 Spulenkörper 1 91140276
46 Erdungskabel 1 67000805
47 Schraubterminal (Flachstecker) 1 67000699
48 Stromkabel 500 mm 1 67000849
49 Computer SD3R 1 94316786
50 Leitung mit Buchse, 700 mm 1 42860007
51 Lamellenstopfen ø 30 mm blau 2 10100189
52 Ablageeinsatz 3625 1 70132656
53 Deckel 4377 1 70128902
54 Aufkleber K-Zeichen 1 33907022
55 Verkleidung rechts 4364 1 70128837
56 Verkleidung links 4365 1 70128838
57 Aufnahme Netzstecker 4196 1 70128803
58 Netztrafo 1 42860006
59 Pedalachse 13x410 1 97201560
60 Pedalanschlag 13x310 1 97201561
61 Distanzrohr 16x1,2x110 A793 2 97201455
62 Schraubenbeutel 1 94314207
63 Distanzrohr 16x1,2x40 A589 2 97200558
64 Cardio-Puls-Set 1 67002000
65 Buchse 2763 1 70132695
66 Deckel 1 70126676
67 Elektronikaufsatz 1 70132653
68 Mitto Plastikschraube 4x35 4 10224072
69 Einschubteil rechts 1 70132654
70 Einschubteil links 1 70132655
71 Befestigungswinkel 1 97201827

Demontage des Computers im Reparaturfall

Detaching computer for repairs

Démontage de l’ordinateur pour réparation

Demontage van de computer voor reparatie

Desmontaje de la computadora en casa de la reparación

Smontaggio del computer nel caso di riparazioni

Demontaż komputera w przypadku naprawy

GB

F

NL

E

I

PL

A

B

12 3

docu 1522a/11.05