Kettler DINING TABLE 2610, 2610 User Manual
2610 36” x 72” DINING TABLE
Contents:
(4) Legs
(16) 1/4 - 20 x 2 1/2” Bolts
(4) 1/4 - 20 x 3” Bolts
(2) Side Braces
(2) Table feet
(1) Table Top
Tool Required:
#3 Phillips Head Screwdriver
Assembly Instructions
1.
With the curved side facing out
align the table leg with the predrilled hole
on the foot of the table and insert a 1/4 20 x 3” bolt then tighten with the phillips
screwdriver.
Repeat on the other end, do both sets.
2.
1.
2.
Place the leg with foot
inside the frame underneath the
tabletop. Align the predrilled
holes, insert two 14 - 20 x 2 1/2”
bolts then tighten them with the
phillips screwdriver.
Repeat on the other leg, do both sides.
Align the predrilled holes on the leg
with the metal insert on the frame,
insert the bolt.
3.
Copyright © Kettler USA 309.01
3.
Place the side support braces
vertically between the legs aligning the
predrilled holes. Insert two 1/4-20 x 2 1/2”
bolts thru the hole into the center brace then
tighten them with the phillips screwdriver.
Repeat on the other brace, do both sides.
Made in the U.S.A.
www.kettlerusa.com
info@kettlerusa.com
Care & Maintenance
Ocean Comfort products are constructed from HDPE (High Density Polyethelene),
primarily a recycled material. UV inhibitors are also added to resist fading. Simply
maintain your furniture by cleaning with soap and warm water to ensure its long lasting
beauty. A soft bristle brush can be used on any tough to clean stains. Stainless steel
hardware is used in the assembly of these products and should be rinsed regularly with
fresh water if being used in a coastal environment.
KETTLER Limited Warranty
Ocean Comfort products are guaranteed for a period of 20 years (for residential use) and 5
years (for commercial use), starting from original purchase date. This warranty covers defects in
materials and/or workmanship and does not apply to the hardware.
Warranty not applicable to any products deemed as misused, abused or damaged due to an
uncontrollable act of nature.
*For Parts and Service, please contact us directly at 866-804-0440 or email parts@kettlerusa.com
KETTLER® International Inc. • 1355 London Bridge Road • Virginia Beach, VA 23453
Made in the U.S.A.
www.kettlerusa.com • info@kettlerusa.com
Loading...