Kettler 07863-000 User Manual

Montageanleitung Cross-Trainer Ergometer „EXT 7”

Art.-Nr. 07863-000, -090

USA

IENLFGB

A B C

138 58 155

150 kg

max.

80 kg

Abb. ähnlich

Auf 100% Altpapier!

Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain information which is important for your safety as well as for the use and maintenance of the appliance. Keep these instructions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

■ The crosstrainer should be used only for its intended purpose,

i.e. for physical exercise by adult people.

■ Any other use of the equipment is prohibited and may be dan-

gerous. The manufacturer cannot be held liable for damage or

Important Instructions

USA

Handling the equipment

■ Before using the equipment for exercise, check carefully to en-

sure that it has been correctly assembled.

■ It is not recommended to use or store the apparatus in a damp

room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.

■ The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.

■ Use for your regular cleaning, maintenance and care our ap-

pliance maintenance set (Article no. 07921-000) specifically licensed for KETTLER Sports apparatus and available from the Sport specialized trade.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

■ The equipment is dependent of revolutions per minute.

■ A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe.

■ The crosstrainer has a magnetic brake system.

Instructions for Assembly

■ Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.

■ Please note that there is always a danger of injury when wor-

king with tools or doing manual work. Therefore please be careful when assembling this machine.

■ Ensure that your working area is free of possible sources of

danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!

injury caused by improper use of the equipment.

■ The crosstrainer has been designed in accordance with the la-

test standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible.

■ The crosstrainer complies with the DIN EN 957 -1/-9, class

HA. It is therefore unsuitable for therapeutic use.

■ Incorrect repairs and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety of the user.

■ Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts.

■ In case of enquiry, please contact your KETTLER dealer.

■ If the equipment is in regular use, check all its components

thoroughly every 1–2 months. Pay particular attention to the tightness of bolts and nuts. This is particularly true for the attachment of grip strap, running plate and fastening of the handlebar and front tube.

■ Instruct people using the equipment (in particular children) on

possible sources of danger during exercising.

■ Before beginning your program of exercise, consult your doc-

tor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health!

■ Any interference with parts of the product that are not descri-

bed within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by KETTLER.

■ To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers.

■ Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

Caution: While assembly of the product keep off children’s reach (Choking hazard - contains small parts).

■ Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

■ Always wear suitable shoes when using.

■ Before beginning your program of training, study the instruc-

tions for training carefully.

■ Our products are subject to a constant innovative quality assu-

rance. We reserve the right to perform technical modifications.

■ In choosing the location of the apparatus, ensure a sufficient sa-

fety distance from any obstacles. The apparatus must not be mounted in the immediate vicinity of main passageways (paths, doorways, corridors).

■ All electric appliances emit electromagnetic radiation when in

operation. Please do not leave especially radiation-intensive appliances (e.g. mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e.g. pulse measurement.

■ The device requires a supply voltage of 230V, 50 Hz.

Connect the power cord with a grounded protective contact socket.

■ Important: Do not under any circumstances carry out electrical

repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician.

■ Important: disconnect the apparatus from the mains before

doing repair, maintenance or cleaning work.

■ Do not use a multiple power socket for the running belt. If an

extension cable is being used, ensure that it complies with the VDE regulations.

■ Unplug the power cord of the device from the socket if not used

for a longer period.

■ Ensure that the power cable is not pinched and that no-one can

trip over it.

Important Instructions

USA

Important Instructions

USA

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if possible technically talented.

■ The fastening material required for each assembly step is sho-

wn in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.

■ Bolt all the parts together loosely at first, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.

■ For technical reasons, we reserve the right to carry out preli-

minary assembly work (e.g. addition of tubing plugs).

List of spare parts page 23-27

When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see handling).

Example order: Art. no. 07863-000 / spare-part no. 70121517

/ 2 pieces / S/N ....................

Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible.

It is important to provide a detailed defect description / damage report!

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with

fastening material“. Waste Disposal

KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).

KETTLER (GB) Ltd.

Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL · Great Britain

http://www.kettler.co.uk

KETTLER International Inc.

1355 London Bridge Road · VA 23453 Virginia Beach USA

http://www.kettlerusa.com

USA

Checkliste (Packungsinhalt)

Checklist (contents of packaging) Liste de vérification (contenu de l’emballage) Checklijst (verpakkingsinhoud)

Lista de control (contenido del paquete) Lista di controllo (contenuto del pacco) Lista kontrolna (zawartość opakowania)

NLFGB

1/1

Checkliste (Packungsinhalt)

2/2 2/2

2/2 1

2/2 1/1

1/1

+ 14 hidden pages