Kettler E3, Ergometer E7, 07682-100 Assembly Instructions Manual

Montageanleitung „E3“

Art.-Nr. 07682-100

Der Umwelt zuliebe: wir drucken auf 100% Altpapier!

F

D

GB

NL

Abb. ähnlich

I

E

PL

CZ

DK

P

A 115 cm
B54cm
C 125 cm

44 kg

max.

150 kg

A

C

B

30 – 40 Min.

SLO

RUS

4

Assembly Instructions

GB

Handling the equipment

ATTENTION! It is not recommended to use or store the appa-

ratus in a damp room as this may cause it to rust. Please
ensure that no part of the machine comes in contact with liquids
(drinks, perspiration etc.). This may cause corrosion.

■ Before using the equipment for exercise, check carefully to
ensure that it has been correctly assembled.

■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre­dictably and dangerous situations may occur for which the
manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.

Before assembling or using the exercise cycle , please read the following instructions carefully. They
contain important information for use and maintenance of the equipment as well as for your per­sonal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare
parts.

For Your Safety

RISK! Instruct people using the equipment (in particular children)

on possible sources of danger during exercising.

RISK! Do not under any circumstances carry out electrical

repairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.

RISK! disconnect the apparatus from the mains before doing

repair, maintenance or cleaning work.

RISK! While assembly of the product keep off children’s reach

(Choking hazard - contains small parts).

RISK! Heart rate monitoring systems may be inaccurate. Over

exercise may result in serious injury or death. If you feel faint
stop exercising immediately.

WARNING! The training device should be used only for its

intended purpose, i.e. for physical exercise by adult people.

WARNING! Any other use of the equipment is prohibited and

may be dangerous. The manufacturer cannot be held liable for
damage or injury caused by improper use of the equipment.

WARNING! Before beginning your program of training, study

the instructions for training carefully.

WARNING! If you lose the pulse signal, the performance of

the device will remain constant for approx. 60 seconds and is
then slowly adjusted downwards. Please check your pulse mea­suring system (ear clip, hand pulse or chest belt) so that the pulse
signal of the electronics can be entered again.

WARNING! All electric appliances emit electromagnetic radi-

ation when in operation. Please do not leave especially radi­ation-intensive appliances (e.g. mobile telephones) directly next
to the cockpit or the electronic controlsystem as otherwise values
displayed might be distorted (e.g. pulse measurement).

WARNING! Ensure that the power cable is not pinched and

that no-one can trip over it.

■ Exercise has been designed in accordance with the latest stan­dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.

■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the
user.

■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged parts
should be replaced immediately and the equipment taken out of
use until this has been done. Use only original KETTLER spare parts.

■ If the equipment is in regular use, check all its components thor­oughly every 1 -2 months. Pay particular attention to the tightness
of bolts and nuts.This applies especially to the securing bolts for
saddle and handelbars.

■ To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.

■ The device requires a supply voltage of 230V, 50 Hz.
Connect the power cord with a protective contact socket.

■ Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.

■ Unplug the power cord of the device from the socket if not used
for a longer period.

■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base your

program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!

■ Any interference with parts of the product that are not described
within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out
by KETTLER service staff or qualified personnel trained by
KETTLER.

■ Always observe the general safety rules and precautions for
working with electrical equipment.

■ Our products are subject to a constant innovative quality
assurance. We reserve the right to perform technical modifi­cations.

■ In case of enquiry, please contact your KETTLER dealer.

■ In choosing the location of the apparatus, ensure a sufficient safety

distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (paths,
doorways, corridors).

■ For a comfortable training position please adjust the handlebar
andsaddle position to your body height.

■ When mounting the product please take the recommended
torque information into account (M = xx Nm).

■ The exercise cycle complies with the DIN EN 957 - 1/5, class
HA.

!

!

!

!

!

!

!

!

!

!

!

!

5

List of spare parts page 38-39

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).

Example order: Art.no. 07682-100/ spare-part no. 10100030 /

2 pieces / S/N ....................

Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original
box if possible.

It is important to provide a detailed defect description / damage
report!

Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening

material“.

Waste Disposal

KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL

[phone] [phone]

www.kettler.co.uk Mail: [e-mail]

KETTLER International Inc.

1355 London Bridge Road [phone]
Virginia Beach, VA 23453 [phone]

www.kettlerusa.com

USA

GB

■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.

■ A slight production of noise at the bearing of the centrifugal mass
is due to the construction and has no negative effect upon ope­ration. Possibly occurring noise during reverse pedalling result
from engineering and are absolutely safe.

■ The exercise cycle has a magnetic brake system.

■ The equipment is independent of revolutions per minute.

■ Please ensure that liquids or perspiration never enter the machine

or the electronics.

■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.

■ Always wear suitable shoes when using.

■ Use for your regular cleaning, maintenance and care our

appliance maintenance set (Article no. 07921-000) specifi­cally licensed for KETTLER Sports apparatus and available from
the Sport specialized trade.

■ Nobody may be in the moving range of a training person
during training.

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!

■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos­sible technically talented.

■ Please note that there is

always

a danger of injury when working

with tools or doing manual work. Therefore please be careful
when assembling this machine.

■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed.

■ Bolt all the parts together loosely at first, and check that they have

been assembled correctly. Tighten the locknuts by hand until resi­stance is felt, then use spanner to finally tighten nuts completely
against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts
have been unscrewed they no longer function correctly (the locking
device is destroyed), and must be replaced.

■ For technical reasons, we reserve the right to carry out preliminary

assembly work (e.g. addition of tubing plugs).

!

27

Messhilfe für Verschraubungsmaterial

Measuring help for screw connections

GB

F

NL

E

I

PL

Gabarit pour système de serrage

Meethulp voor schroefmateriaal

Referencia de medición para el material de atornilladura

Misura per il materiale di avvitamento

Wzornik do połączeń śrubowych

CZ

Měřící pomůcka pro materiál k přišroubování

Beispiele Examples Examples Bij voorbeeld Ejemplos

Esempio Przyktady Příklad Eksempel

Primer Примеры

DK

Hjælp til måling af skruer

P

Auxiliar de medição para materiais de aparafusamento

– D – Gehört nicht zum Lieferumfang.

– GB – Not included.

– F – Ne fait pas partie du domaine de livraison.

– NL – Is niet bij de levering inbegrepen.

– E – No forma parte del volumen de entrega.

– I – Non in dotazione alla fornitura.

– PL – Nie należy do zakresu dostawy.

– CZ – Nepatří do rozsahu dodávky

– P – Não está incluído nas peças fornecidas
– DK – Er ikke inkluderet i leveringsomfanget.
–SLO – niso vključeni.
– RUS – Не входит в комплект поставки.

Merilni pripomoček za vijačni material

SLO

RUS

Размеры крепёжных материалов

28

Checkliste

4

3,9 x 25

1

1

Stck.

4

4

1/1

1

1

1

1

1
1

1

1

M 8 x 20

ø 8,4x25x3

ø 6x7,5

3

4

1

M 8

2

1

1

SW 10/13

M 8

Checklist

GB

F

NL

E

I

PL

Lista de control

Lista di controllo

Lista kontrolna

CZ

Kontrolní seznam

DK

Checkliste

P

Lista de verificação

Liste de vérification

Checklist

1/1

ø 16x3,9x16,5

M 8 x 75

M 8 x 45

ø 8,3x16x2

3,9 x 40

1

1

1

1

1

2

1

3,9 x 9,5

1

1

1

1

SLO

Kontrolni seznam

RUS

Список комплекта поставки

29

1a

1b

M 8 x 45

2

M 8x45 = 15 Nm

ø 8,4x25x3

1c