Kettler 07666-000 User Manual

Montageanleitung für

„LOTUS R

“

Art.-Nr. 07666-000

Der Umwelt zuliebe: wir drucken auf 100% Altpapier!

F

D

GB

NL

Abb. ähnlich

I

E

PL

CZ

DK

P

A 170 cm
B 54,5 cm
C 123 cm

57 kg

max.

150 kg

A

C

B

4

Handling the equipment

■ Before using the equipment for exercise, check carefully to
ensure that it has been correctly assembled.

■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of

the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.

■ The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpre­dictably and dangerous situations may occur for which the
manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.

■ The exercise cycle complies with the DIN EN 957 - 1/5, class
HA.

Assembly Instructions

GB

Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.

For Your Safety

■ ATTENTION! The crosstrainer should be used only for its

intended purpose, i.e. for physical exercise by adult people.

■

ATTENTION! Any other use of the equipment is prohibited

and may be dangerous. The manufacturer cannot be held liable
for damage or injury caused by improper use of the equipment.

■ Exercise has been designed in accordance with the latest stan­dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.

■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the
user.

■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged parts
should be replaced immediately and the equipment taken out
of use until this has been done. Use only original KETTLER spare
parts.

■ If the equipment is in regular use, check all its components thor­oughly every 1 -2 months. Pay particular attention to the tightness
of bolts and nuts.This applies especially to the securing bolts for
saddle and handelbars.

■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.

■

ATTENTION! Instruct people using the equipment (in parti-

cular children) on possible sources of danger during exercising.

■ The device requires a supply voltage of 230V, 50 Hz.
Connect the power cord with a grounded protective contact socket.

■ IMPORTANT! Do not under any circumstances carry out elec-
trical repairs or alterations yourself. Always ensure that such work
is done by a properly qualified electrician.

■ IMPORTANT! disconnect the apparatus from the mains before
doing repair, maintenance or cleaning work.

■ Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.

■ Unplug the power cord of the device from the socket if not used
for a longer period.

■ Ensure that the power cable is not pinched and that no-one can
trip over it.

!

!

!

!

!

■ All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed might
be distorted (e.g. pulse measurement).

■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base your

program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!

■ Any interference with parts of the product that are not described
within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out
by KETTLER service staff or qualified personnel trained by
KETTLER.

■ Always observe the general safety rules and precautions for
working with electrical equipment.

■

ATTENTION! Before beginning your program of training, study

the instructions for training carefully.

■ Our products are subject to a constant innovative quality
assurance. We reserve the right to perform technical modifica­tions.

■ In case of enquiry, please contact your KETTLER dealer.

In choosing the location of the apparatus, ensure a sufficient safety

distance from any obstacles. The apparatus must not be mounted
in the immediate vicinity of main passageways (paths, doorways,
corridors).

■ For a comfortable training position please adjust the handlebar

andsaddle position to your body height.

■ ATTENTION! While assembly of the product keep off

children’s reach (Choking hazard - contains small parts).

■

WARNING! Heart rate monitoring systems may be inac-

curate. Over exercise may result in serious injury or death. If you
feel faint stop exercising immediately.

■

ATTENTION! If you lose the pulse signal, the performance

of the device will remain constant for approx. 60 seconds and
is then slowly adjusted downwards. Please check your pulse mea­suring system (ear clip, hand pulse or chest belt) so that the pulse
signal of the electronics can be entered again.

■ When mounting the product please take the recommended

torque information into account (M = xx Nm).

!

!!!

5

Instructions for Assembly

■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos­sible technically talented.

■ Please note that there is

always

a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.

■ Ensure that your working area is free of possible sources of danger,
for example don’t leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any

danger. There is always a risk of suffocation if children play with
plastic bags!

■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.

■ Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resi­stance is felt, then use spanner to finally tighten nuts completely
against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts
have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.

■ For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).

List of spare parts page 31-32

When ordering spare parts, always state the full article number, spare­partnumber, the quantity required and the S/N of the product (see
handling).

Example order: Art.no. 07666-000 / spare-part no. 10100030 /

2 pieces / S/N ....................

Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if pos­sible.

It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening

material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful
life please dispose of this article correctly and safely (local
refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL

[phone] [phone]

www.kettler.co.uk Mail: [e-mail]

KETTLER International Inc.

1355 London Bridge Road [phone]
Virginia Beach, VA 23453 [phone]

www.kettlerusa.com

USA

GB

■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.

■ A slight production of noise at the bearing of the centrifugal mass
is due to the construction and has no negative effect upon ope­ration. Possibly occurring noise during reverse pedalling result
from engineering and are absolutely safe.

■ The exercise cycle has a magnetic brake system.

■ The equipment is independent of revolutions per minute.

■ Please ensure that liquids or perspiration never enter the machine

or the electronics.

■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.

■ Always wear suitable shoes when using.

■ Use for your regular cleaning, maintenance and care our appliance

maintenance set (Article no. 07921-000) specifically licensed for
KETTLER Sports apparatus and available from the Sport specia­lized trade.

■ Nobody may be in the moving range of a training person during

training.

22

Messhilfe für Verschraubungsmaterial

Measuring help for screw connections

GB

F

NL

E

I

PL

Gabarit pour système de serrage

Meethulp voor schroefmateriaal

Referencia de medición para el material de atornilladura

Misura per il materiale di avvitamento

Wzornik do połączeń śrubowych

CZ

Měřící pomůcka pro materiál k přišroubování

Beispiele Examples Examples Bij voorbeeld Ejemplos

Esempio Przyktady Příklad Eksempel

DK

Hjælp til måling af skruer

P

Auxiliar de medição para materiais de aparafusamento

23

Checkliste

M 5 x 25

1

Stck.

1

1

2

1

1

4

1

1

M 8 x 16

1

1

ø 25/8

4 x 35

1

2

1

Pulsmesser

M 8

2

2

– D – Gehört nicht zum Lieferumfang.

– GB – Not included.

– F – Ne fait pas partie du domaine de livraison.

– NL – Is niet bij de levering inbegrepen.

– E – No forma parte del volumen de entrega.

– I – Non in dotazione alla fornitura.

– PL – Nie należy do zakresu dostawy.

– CZ – Nepatří do rozsahu dodávky

– P – Não está incluído nas peças fornecidas

– DK – Er ikke inkluderet i leveringsomfanget.

24

1

A

B

A

B

M 8 x 16

M 8 x 16

C

B

A

4 X 35

2

3

M 8x16 = 20 Nm

25

4

5

M8

B

B

A

A

C

C

D

E

1/2

26

7

A

B

C

M5 X 25

6

27

R

L

9

A

B

8

!

A

B

B

Zur Montageerleichterung die
Zehriemen im warmen Wasser
anwärmen.

In order to make installation easier,
gently warm the foot strap in warm
water

F

GB

I

PL

CZ

E

NL

DK

P

Pour faciliter le montage, réchauffer
les sangles des pédales dans de
lʼeau chaude.

Om de montage te vergemakke­lijken de voetriemen in warm water
verwarmen.

Para facilitar el montaje témplense
las correas de fijación de los pedales
en agua caliente.

Per facilitare il montaggio, riscaldare
le cinghie dei pedali in acqua calda

W celu ułatwienia montażu pasek
pedału podgrzać w ciepłej wodzie.

Za účelem usnadnění montáže
nahřejte třmen v teplé vodě.

Opvarm pedalstropperne i varmt
vand så de er nemmere at montere.

Para facilitar a montagem, é conve­niente aquecer previamente as fivelas
de fixação do pé em água quente.

D

28

A

B

C

D

A

B

Handhabungshinweise

E

Instrucciones de manejo

GB

F

NL

I PL

CZ

Pokyny k manipulaci

Handling

Bedieningsinstrukties

Indications relatives à la manipulation

Avvertenze per il maneggio

DK

Håndtering

P

Notas sobre o manuseamento

Wskazówki obsługowe

A

B

29

Handhabungshinweise

Beispiel Typenschild - Seriennummer
Example Type label - Serial number
Example Plaque signalétiqu - Numèro de serie
Bij voorbeeld Typeplaatje - Seriennummer
Ejemplo Placa identificativa - Número de serie
Esempio Targhetta tecnica - Numero di serie
Przyklady Tabliczka identifikacyna - Numer serii
Přiklad typového štítku – sériové číslo
Eksempel type label – serienummer

Exemplo placa de características - número de série

D

F

GB

E

I

NL

PL

CZ

DK

P

Bei Geräten mit Netzteil: Achtung! Betrieb nur mit mitge­liefertem Original-Netzteil oder Original-KETTLER-Ersatzteil
(siehe Ersatzteilliste) zulässig. Ansonsten Gefahr der

Beschädigung.

For products with power supply: Attention! Only use with
original power unit as supplied, or with original KETTLER
spare part (see spare part list). Otherwis this may result in

damage.

Pour les appareils avec bloc secteur: Attention! Exploiter
uniquement l’appareil avec son bloc secteur original qui
fait partie de la fourniture ou une pièce de rechange ori­ginale de KETTLER (voir liste des pièces de rechange).

Sinon risque de détérioration.

Bij apparaten met transformator: Let op! Gebruik alleen toe­gestaan met de bijgeleverde orginele transformator of
orgineel KETTLER-onderdeel (zie onderdelenlijst). Anders

gevaar voor beschadiging.

En aparatos con fuente de alimentación: ¡Atención!
Funcionamiento solamente autorizado con la fuente de ali­mentación original suministrada o con pieza de recambio
original de KETTLER (ver lista de piezas de recambio). De

lo contrario podría ocasionar daños.

Apparecchi con alimentatore: Attenzione! L’utilizzo è cons­entito soltanto con l’alimentatore originale fornito in dota­zione oppure con parte di ricambio originale della KETTLER
(vedasi lista delle parti di ricambio). Altrimenti sussiste il

rischio di danneggiamenti.

Dotyczy urządzeń z zasilaczem: Uwaga! Eksploatacja
urządzenia jest możliwa tylko z dostarczonym oryginalnym
zasilaczem lub z oryginalnym urządzeniem zastępczym
marki KETTLER (patrz ? Lista części zamiennych). W prze-

ciwnym razie istnieje ryzyko uszkodzenia.

U přístrojů se síťovým zdrojem: Pozor! Provoz je přípustný
pouze s originálním síťovým zdrojem obsaženým v dodávce
nebo originálním náhradním dílem od firmy KETTLER (viz
seznam náhradních dílů). Jinak vzniká nebezpečí poš-

kození.

Maskiner med netdel: OBS! Det er kun tilladt at bruge den
medleverede originale netdel eller den originale reservedel
fra KETTLER (se reservedelslisten). I modsat fald kan mas-

kinen beskadiges.

Em aparelhos com cabo: Atenção! O funcionamento só
é permitido com o cabo original fornecido ou com a
peça sobressalente original KETTLER (ver lista de peças
sobressalentes). Caso contrário, perigo de danos.

GB

F

NL

E

D

PL

CZ

I

DK

P

30

Demontage der Pedalarme

Zum Abziehen des Pedalarms entfernen Sie zuerst die Schutzkappe
und Schraube (A). Halten Sie den Pedalarm fest und drehen Sie
eine Schraube M12 (gehört nicht zum Lieferumfang) in die
Gewindeöffnung (B). Nach einigen Umdrehungen können Sie den
Pedalarm abnehmen (C).

Removal of pedal arms

To pull off the pedal arms remove cap and screw (A). Grip the pedal
arm tightly, and screw in an M12 bolt (not supplied) into the thread
(B). After a few turns you may take off the pedal arm (C)

Démontage de la manivelle

Enlevez d'abord le capot de protection ainsi que la vis (A) avant
de retirer le bras de la pédale. Tenez le bras de la pédale et vissez
une vis M12 (ne fait pas partie de la gamme de livraison) dans l'ou­verture de filetage (B). Vous pouvez retirer le bras de la pédale (C)
après plusieurs tours.

Demontage van de krenk

Voor het losmaken van de cranken, verwijdert u eerst het bescherm­dopje en schroef (A). Houd de crank vast en draai e
g van de schroefdraad (B). Na enkele omwentelingen kunt u de crank
verwijderen (C).

Desmontaje de las manivelas de pedal

Para quitar la manivela de pedal hay que quitar primero la tapa
protectora y el tornillo (A). Retenga la manivela de pedal y apriete
un tornillo M12 (no forma parte del volumen de suministro) en la
rosca (B). Después de haber efectuado algunas vueltas podrá
quitar la manivela de pedal (C).

Smontaggio dell’attacco del pedale

Per togliere l’attacco del pedale togliete prima il coperchietto pro­tettivo e la vite (A). Tenete fermo l’attacco del pedale e girate una
vite M12 (non compresa nella fornitura) nella filettatura (B). Dopo
aver effettuato alcuni giri, potete togliere l’attacco del pedale (C).

Demontaż ramion pedału

W celu zdjęcia ramienia pedału należy najpierw usunąć osłonę i
wykręcić śrubę. (A). Przytrzymując ramię pedału wkręć śrubę M12
(nie należy do zakresu dostawy) w gwintowany otwór (B). Po kilku
obrotach możesz zdjąć ramię pedału (C).

Demontáž kliky pedálu

Pro sejmutí kliky pedálu nejprve odejměte ochrannou čepičku a šroub
(A). Pevně přidržte kliku pedálu a do závitového otvoru (B) zašrou­bujte šroub M12 (nepatří do rozsahu dodávky). Po několika
otočeních lze kliku pedálu odebrat (C).

Afmontering af pedalarme

Fjern først beskyttelseskappen og skruen (A) inden pedalarmen
tages af. Tag fat i pedalarmen og skru en M 12 bolt (er ikke inklu­deret i leveringsomfanget) i gevindåbningen (B). Efter nogle få
omdrejninger kan pedalarmen tages af (C).

Desmontagem dos braços do pedal

Para retirar o braço do pedal, remova primeiro a capa de protecção
e o parafuso (A). Segure bem o braço do pedal e aparafuse um par­afuso M12 (não está incluído nas peças fornecidas) no furo da rosca
(B). Depois de dar algumas voltas, pode levantar o braço do pedal (C).

I

PL

CZ

E

NL

A

B

C

DK

– D – Gehört nicht zum Lieferumfang.

– GB – Not included.

– F – Ne fait pas partie du domaine de livraison.

– NL – Is niet bij de levering inbegrepen.

– E – No forma parte del volumen de entrega.

– I – Non in dotazione alla fornitura.

– PL – Nie należy do zakresu dostawy.

– CZ – Nepatří do rozsahu dodávky

– P – Não está incluído nas peças fornecidas

– DK – Er ikke inkluderet i leveringsomfanget.

F

GB

A

P

31

Ersatzteilzeichnung

1

1

2

3

4

5

6

7

8

9

10

11

12

13

15

14

40

34

36

37

17

18

19

29

30

39

16

31

20

21

27

33

28

26

25

24

22

22

35

23

23

38

32

Ersatzteilliste Heimtrainer „LOTUS R“

Pos. Beschreibung Stück Ersatzteil-Nr.

1 Bodenrohr 80x33mm mit Folienpapier 2 94600231
2 Bodenschonerset 80x33mm 1 91180488
3 Seitenverkleidung Unterteil rechts und links (4467/4498) 1 94600548
4 Seitenverkleidung rechts und links (5452/5453) 1 94600549
5 Lenkrohrabdeckung rechts und links (4499/4500) 1 94600562
6 Cockpitstütze Ober und Unterteil (4504/4505) 1 94600368
7 Pedalverkleidung (4483) mit Stopfen 2 94600369
8 Schienenabdeckung (4503) 2 70129557

9 Schienenabdeckung (4502) 1 70129556
10 Standrohrverkleidung (4501) 1 70129555
11 Sitzträger mit Bowdenzug und Griffen 1 94600435
12 Rückenbügel 1 91112073
13 Rückenbügelbezug 1 57686600
14 Schwungrad mit Lager und Freilauf 1 91140420
15 Antriebsrad mit Kugellager 1 91130135
16 Umlenkhebel BL839+Achse 1 91140411-40
17 Magnetbügel 1 91140409-40
18 Bowdenzug 1 43009256
19 Motor M-07 1 67000980
20 Führungsschiene mit Druck 1 91112059
21 Verstärkungsblech 550mm 1 97201998
22 Pedalarm (Paar) 1 33001010
23 Pedale Typ SP-243 2K (Paar) 1 33300020
24 Lüftungsgitter (3338) 1 70129307
25 Aufnahme f. Netzstecker (5108) 1 70127881
26 Computer SM3635-68 1 67000946
27 Cockpit-Oberteil (4490) 1 70129303
28 Cockpit-Hinterteil (4491) 1 70129304
29 Motorhalteblech 1 97202747
30 Netzzuleitung 500 mm o. Halter 1 67000863
31 Druckfeder 1 25509257
32 Pulsabnehmer P-03 1 67000653
33 Stromkabel 12 pol. 600 mm 1 67000979
34 Distanzrolle (0593) 2 70110434
35 Lasche (BD1407) für Pedalverkleidung 2 97200258
36 Geschwindigkeitsabnehmer 375mm 1 67000690
37 Antriebsriemen (POLY-V 1016 PJ 8) 1 67005134
38 Netzteil 9V 1 67000943
39 Zudfeder D=1.25 1 25616646
40 Lenksäule mit Griffschl.u Schraubenterminel 1 94600563
41 Teilebeutel (ohne Abbildung) 1 91180525

docu 2829/07.10