Kettler 07648000, Rivo-P Assembly Instructions Manual

"

KETTLER

Monlageanleilung"RIVO - pll

Art.-Nr.07648-000

(

A

A B (& ·

150 67 U ~

A B c~ 169 56kg130kg

max.

D -"

KEnLER

FREIZEITMARKEKEnLER

@
@)

CD
@

CD
CD
@
CD

@

II

For Your Safety

t1:>ATTENTIONI The crosstrainer should be used only for its

intended purpose, Le. for physical exercise by adult people.

:.:)':" ATTENTION! Any other use of the equipment is prohibited

and may be dangerous. The manufacturer cannot be held
liable for damage or injury caused by improper use of the
equipment.

Thecrosstrainerhas beendesigned in accordance withthe

latest standards of safety. Anyfeatures which may have been
a possiblecause of injuryhave been avoided or made as safe
as possible.

Thetrainingdevice corresponds with DINEN 957 -1/-9, class
HB.

Incorrectrepairs and structuralmodifications (e.g. removal or

replacement of original parts) may endanger the safety of the
user.

Damaged componentsmay endanger your safety or reduce the
lifetimeoftheequipment.Forthisreason, worn or damaged paris
should be replaced immediately and the equipment taken out
of use untilthishas been done. Use onlyoriginal KETTLERspare
parts.

Incase of enquiry, please contact your KETTLERdealer.
If the equipment is in regular use, check all its components

thoroughly every 1-2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the
attachmentof gripstrap, runningplate and fasteningofthe hand-

lebar and front tube.

& ATTENTIONI Instructpeople using the equipment (inparti-

cular children)on possible sourcesof danger during exercising.

Beforebeginning your program ofexercise, consultyour doctor
toensurethatyou are fitenough to use the equipment. Baseyour
programofexerciseon theadvice givenby your doctor.Incorrect
or excessiveexercise may damage your healthl

Anyinterferencewith parts ofthe productthat are not described
withinthe manual may cause damage, or endanger the person
using this machine. Extensiverepairs must only be carried out

by KETTLERservicestaff or qualified personnel trained by

KETTLER.

To ensure that the safety level is kept to the highest possible
standard, determined by itsconstruction,this product should be

serviced regulary (once a year) by specialist retailers.
Beforeuse, always check all screws and plug-inconnections as

well as respective safetydevices fitcorrectly.

it ATTENTIONI While assembly of the product keep off

children's reach (Choking hazard -contains small parts).

Always wear suitable shoes when using.
/.!\ATTENTIONIBeforebeginningyourprogramoftraining,study

the instructionsfortraining carefully.
Our products are subject to a constant innovativequality assu-

rance. We reserve the rightto performtechnical modifications.

4

Inchoosing the location of the apparatus, ensure a sufficientsafety
distance from any obstacles. The apparatus mustnot be mounted
in the immediate vicinity of main passageways (paths, doorways,
corridors).

Always observe the general safety rules and precautions for
working with electrical equipment.

All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive appli-
ances (e.g. mobile telephonesj directly next to the cockpit or the
electronic controlsystem as otherwise values displayed might be
distorted (e.g. pulse measurement.

The device requires a supply voltage of 230V, 50 Hz.
Connect the power cord with a protective contact socket.

tI\ IMPORTANT! Do not under any circumstances carry out
electrical repairs or alterations yourself. Always ensure that such

work isdone by a properly qualified electrician.

d,IMPORTANT! disconnect the apparatus from the mains

before doing repair, maintenance or cleaning work.

Do not use a multiple power socket forthe running belt. Ifan
extension cable is being used, ensure that itcomplieswith the
VDEregulations.

Unplugthe power cord of the device fromthe socket ifnot used
for a longer period.

Ensurethat the power cable is not pinched and that no-one can

tripoverit.

!h WARNING!Heart rate monitoring systems may be inac-

curate. Over exercise may result in serious injuryor death. If
you feel faint stop exercising immediately. .

Theproductis not suitableforuse by personsweighingover 130

kg.
Nobody may be in the moving range of a training person

during training

Pay attention to the fact that the quicklyrotating disk flywheel
stronglyheats during operation.

Thisexercise machine mayonly be used forexercisesindicated
in the training instructions.

....

Handling the equipment

Before using the equipment for exercise, check carefully to
ensurethat it has been correctly assembled.

It isnot recommendedto use or store the apparatus in a damp
room as this may cause it to rust. Pleaseensure that no part of

the machinecomes incontact with liquids (drinks, perspiration
etc.). This may cause corrosion.

Themachine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the

manufacturer cannot be held liable. If, in spite of this, children
are allowed to usethe equipment, ensurethat they are instructed
in itsproper use and supervised accordingly.

Use for your regular cleaning, maintenance and care our
appliance maintenance set (Article no. 07921-000) specifi-
cally licensedfor KETTLERSportsapparatus and available from
the Sport specialized trade.

Instructions for Assembly

Ensure that you have received all the parts required (see check

listl and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLERdealer.

Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.

Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around. Always
dispose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children play
with plastic bags!

The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-
sible technically talented.

Listof spare parts page 28-29

When ordering spare parts, always statethe full article number,

spare-partnumber, the quantity required and the SIN of the
product (seehandling).

Example order: Art. no. 07648-000 I spare-part no. 680033871

1 pieces I SIN ....................

Pleasekeep original pockaging of thisarticle, so that it may be
used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the ori-
ginal box if possible.

Itis important to provide a detailed defect description I damage
report!

Important: spare part prices do not include fastening material;

if fastening material (bolts, nuts, washers etc.) is required, this
shouldbe clearly stated on theorder by adding thewords "with
fastening material".

Please ensure that liquids or perspiration never enter the machine
or the electronics.

The equipment is dependent of revolutions per minute.
A slight production

of noise at the bearing of the centrifugal moss

is due to the construction and has no negative effect upon ope-
ration. Possibly occurring noise during reverse pedalling result
from engineering and are absolutely safe.

The crosstrainer has a magnetic brake system.

Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.

The surface on which the unit is placed must be firm and even.

Place rubber or straw mats under it to deaden any noise or
impacts. Only for appliances with weights. Avoid powerful

oscillations of the dumbbells!

The fastening material required for each assembly step is

shown

in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.

Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.

For technical reasons, we reserve the right to carry out preliminary

assembly work (e.g. addition of tubing plugs).

'j

I

I

I

Waste Disposal

)t

KETTLERproducts are recyclable. At the end of its

useful life pleasedispose of this article correctly and

. safely (local refuse sites).

-

I

I
I

L

@ KETTLERGB Ltd. .KETTLER House, Merse Road. North

Moons Moat. Redditch, Worcestershire B98 9HL

http://www.kettler.co.uk

@ KETTLERInternational Inc. . 1355 London Bridge Road.

Virginia Beach, VA 23453

http://www.kettlerusa.com
http://www.kettler.ch

5

@ Checkhst(contentsof packaging)

CD Ustedeverification(contenudeI'embaUage)
@ Checklijst(verpakkingsinhoud)

CD Ustadecontrol(contenidodelpaquete)

CD Ustadi controUa(contenutodelpaceo)

@ UsIakontrolna(zowartostopakowania)

CD Lista de verifica~iiodo contelidodaembalagem

@ pakkensindhold

20

;::;

Stck.

EJ tc.

Pas. 45

C)

<':: ,;;;.0

1

I)>> CI==>

M6

4

i-

i:U

""6

1

€)

JIIJJIII)JJI})

M8x60

4

€)

JnmmJJI))

M8x55

2

1

Q)JB>

M8x40

4

£

1

M8x20

2

1

@»>D

M7x30

2

Q)Pmm

M6x40

4

@

o 8x19

4

1

J

o 8x19

4

(G

0

o 17x25

2

1

@

o 10x25

2

PVC

t!J 13

@

o 10x26

2

@)

o 8x16 2

n

@>

07 2

1

u

n

@>

06

4

@

07

2

@

M8

6

3x20 10

gl I

1

3x25

I I

7

t'\ .A...

ffi

?

1

v

i

EJ

Pas. 46

e:=>-

"OJ"

l(

{Jm

M5x12

4

0-

M5x14

16

(

O;>@

M 8x19

4

-.

I)

1

-----

O»@@@

.

M 8x16

2