KERN & SOHN TVL User Manual
Sauter GmbH
Ziegelei
D-72336 Balingen
E-Mail: info@sauter.eu
Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www. kern-sohn.com
Instruction Manual
TVL
Herzlichen Glückwunsch zum Erwerb eines Prüfstandes
Thank you for buying a SAUTER test stand. We hope you
are pleased with your high quality test stand with its big
functional range. If you have any queries, wishes or helpful
suggestions, do not hesitate to call our service number.
1. Included in delivery
- SAUTER TVL
- Various hooks
2. Warning
Intended use
The instrument you have acquired serves to determine the
measuring value of the material to be measured. It is
intended to be used as a “non-automatic“ instrument, i.e.
the material to be measured is manually and carefully
attached at the instrument. The measuring value can be
read off after a stable measuring value has been obtained.
3. Technical Specifications
Capacity: up to 500 Newton
Travel distance per knob rotation (stroke) : 3,1 mm
Weight: 8,6 kg
Max Travel: 297 mm from base plate
Height : 495 mm / Lenght : 235 mm / Depth: 150 mm
Height of upper hook above base plate: 460 mm
Length measuring unit:
Scale length: 200 mm
precision: 0,01 mm
switches :
- ON/0: switch on
Zero position
- Min/In: switchover from millimeter to inch
- ▲: Manual preselection of length, upward
- ▼: manual preselection of length,
downward
Horizontal Adjustment of test stand through turn-over and
hight adjustment with Level screw M6.
4. Attaching the force gauge
With four M 3 Screws
TVL-BA-e-1110 1
Sauter GmbH
Ziegelei
D-72336 Balingen
E-Mail: info@sauter.eu
Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www. kern-sohn.com
Instruction Manual
TVL
73
152
234
340
38
30
150
30
113
48
20
Ø 7
M 6
M 6
M 6
200 mm (max
open space)
50 mm
Data with
FH series,
sensor inside
Dimensions in mm
TVL-BA-e-1110 2
Loading...