KERN & SOHN THP User Manual
Sauter GmbH
Ziegelei 1
THP
D-72336 Balingen
E-Mail: info@sauter.eu
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Instruction Manual
Model: THP
Thank you for buying a SAUTER horizontal manual Test
Stand. We hope you are pleased with your high quality
test stand with high repeatability and its big functional
range. If you have any queries, wishes or helpful
suggestions, do not hesitate to call our service number.
1. Included in delivery
- SAUTER THP (with Fast-Move)
2. Warning
Intended use
The instrument you have acquired serves to determine the
measuring value of the material to be measured. It is
intended to be used as a “non-automatic“ instrument, i.e.
the material to be measured is manually and carefully
attached at the instrument. The measuring value can be
read off after a stable measuring value has been obtained.
Be careful about the limit load of test stand and force
gauge. Do not go over the maximum force.
3. Technical Specifications
Capacity: up to 500 Newton
Net weight: 8,4 kg
Various possibilities for fixture mountings
Height of the carriage travels above base plate: 15 mm
Closest starting point of the carriage right from the
instrument: 115 mm
Furthest ending point of the carriage: 258 mm
Maximum Travel (with one stroke): 64 mm by Fast-Move
Length: 450 mm / height : 97 mm / width : 170 mm
THP-BA-e-1310 1
Loading...